Access control systems & kits  (1,177)

Front programming panel with built in KeyPAC proximity reader for use with controllers on systems where KeyPAC readers are used.

PC Interface kit allows PAC tokens and cards to be administered into a PAC for Windows system. Complete with desktop PAC administration reader and interface unit.

The Inova central manager system allows direct and remote (via modem) connection of Inova Site Controllers with full programming flexibility. A number of sites can be identified in configuration (using a 6-digit unique number), and connected directly to the COM port or a PC or to a modem on a PSTN telephone line. Full control of all doors is possible, along with network capable card administration software to allow LAN operation of the system.

Proximity reader/controller. Programming via master code. LED and audible status indicators.

Model DGLP is of ABS construction while model DGLI is of stainless steel. LED status indicator. Controller not included. 1 reader per controller.

Kit with PROMI-500 or DG-Prox reader/controller, GAER release kit or mini magnet, power supply unit and 10 keyfobs.

14 way alarm input board. Selectable N/O or N/C from software. LED status indicator. Address setting from DIP switch. Hooks onto RS485 bus.

Interface, without electrical isolation, for extending a RS 485 network. It can be integrated, for example, in every ACS-8 basic unit or in each time recording terminal. Model 026693 available as interface with electrical isolation.

This card can be used to connect the ACS-1 directly to a modem. It is supported by software version V.05.XX and upgrades.

CK-RBT is a user key featuring rechargeable battery and replaceable tip.

Specifically designed to connect current building alarm systems to the Paxton10 building intelligence system Based on the alarm status, it can control other appliances within the building to take appropriate action such as opening fire doors in the event of a fire alarm Can also set or unset an intruder alarm, based on opening or securing the building at the beginning or end of the day Fault finding LEDs

Parabit 200-20005 is an ATM access control kit that includes: ACS-2 control panel in standard case Swipe card reader IP adapter 40 ft. card reader cable Power supply Instructional decals

Parabit 200-20026 is an ATM access control kit that includes: ACS-2 control panel in standard case Modem 40 ft. card reader cable Override toggle switch Power supply Black Insert card reader w/SkimGardTM technology Featuring: 3 point fraud detection system (Overlay/Tamper/Cable Cut) Remote ACS card reader SkimGard logic board Instructional decals

Parabit 900-00000 is a vandal resistant flush mount phone with keypad. It features aluminium and stainless steel construction. It has fraudulent call deterrent design and is password protected. It is remotely programmable.

CyberLock A-U220 is a 220 V, 50Hz USB station transformer.

CyberLock BOX-01 is an indoor/outdoor single gang box.

Parabit 900-50005 is a mini display telephone that converts surface mount wall phone to counter top phone.

Parabit 900-50002 is an analogue auto dialer telephone parts kit that features: Hook Switch Activated Line Powered Password Protected Fraudulent Call Deterrent Design Remotely Programmable with Any Touch Tone Telephone

CyberLock TIP-010 is a replaceable case for the CK-RXD2 CyberKey smart key.

Parabit 200-10058 is a tamper switch.

Parabit 200-10136 is a ACS-1 power supply.

Parabit 200-10133 is a ACS-2 power supply.

The Reader Combiner allows two PAC proximity readers to be used on the same door channel. May be used with a car park barrier with one reader for cars and the other for lorries. Only one reader may be used per PAC 2100/1100 without the need for an external power supply. 5 year guarantee against electronic failure. Not compatible with the Easikey range of products.

PAC Central Network Controller for use with PAC for Windows. Allows PAC for Windows to communicate with PAC door controllers via the PAC six wire bus and RS-232. Built-in PAC reader to enable PAC cards or tokens to be administered into the PAC for Windows system. Complete with power supply and battery back-up facility.

This passive infra-red (PIR) RTE switch detects a person approaching a door and unlocks it automatically. With an adjustable head and integral LED. Fitted above the door in a horizontal position.

SRS Smart kit with SA99 control unit with built in power supply and battery charger (40012001), HID proximity reader (6008AGP), lock release (615112 & plates), and 10 x Proximity cards(1326).

SRS Smart kit with SA99 control unit with built in power supply and battery charger (40012001), HID proximity reader (6008AGP), mini magnet (EMV10001), geen break glass unit (114411), battery, Egress button & back box (80915, 80845) and 10 x Proximity cards(1326).

Includes access control function. User is identified via card or keyfob.

Parabit 200-20007 is an ATM access control kit that includes: ACS-2 control panel in standard case Insert card reader IP adapter 40 ft. card reader cable Power supply Instructional decals

CyberLock CLP-100 USB programmer is designed primarily for use with a laptop computer to communicate with multiple locks in the field. It can download, update, and add new locks. The USB Programmer allows users to download locks if a key is lost or stolen, and update locks with lost key information.

CyberLock HDM1459 is a USB micro cover for the CK-RXD2 CyberKey smart key, black, 25 pack.

CyberLock HDP237W is a white end cap for the CK-RCG and CK-RXD CyberKey smart keys.

Parabit 900-50000 is a voice over IP handset with modular connector that connects to computers sound card. It also includes: 36” Vandal Resistant Handset with Armored Cord and RJ II Modular Connection Chrome Handset Cradle VOiP Modular to 1/8” Phone Plug Interface Cable with Modular RJ II Jack Optional Hook Switch Available

CyberLock TWC-016 is a standard USB to micro USB cable for the CK-RXD2 CyberKey smart key.

Front programming panel with built-in PAC magnetic stripe reader for use with controllers on systems where magstripe readers are used.

Four part reader/controller with turning unit and 2 sensor pods. Each unit is supplied with 3 metres of cable. Suitable for internal and external use. Combined weight is 3 kg. Uses Identec active tags. Requires the use of a PAC wiegand interface when used with the Easikey 1000 and the PAC 2100/1100 controllers. One year guarantee against electronic failure.

Print and time server for up to 10 INOVA Plus or INOVA PDC door systems via a RS485 data link in a networked system. real time clock for access schedules, 15 blocks of holidays and scheduled timed door locking/unlocking. Provides an immediate permanent printed record of activity. RS232 printer output.

Internal controller. Uses proximity badges or PIN. Auxiliary proximity reader available (LPP or LP). Double sided sticker for LPP reader (DFP).

14 way lift relay board. Users defined to floor levels. Address setting from DIP switch. Hooks onto RS485 bus.

Automatic Program Installation and setup. 50,000 History transactions. Up to 64 readers. Automatic Door opening by time and day. Automatic card activation and deactivation. Photo image Importing.