Access control systems & kits  (1,145)

Parabit 900-50005 is a mini display telephone that converts surface mount wall phone to counter top phone.

Parabit 200-10043 is an ACS-2 controller board only.

Parabit 200-10133 is a ACS-2 power supply.

The PC interface kit allows non PAC cards or tokens to be administered into the PAC for Windows system. Complete with wiegand interface and interface unit (wiegand reader not included).

Iris recognition system combing remote optical units, enrolmwnt units and identification control unit. Recognition speed:

Allows upgrading of standard Easikey 1000 units to Easikey 1000N. An eprom extractor tool (model 1944) can be used when upgrading.

Complete kit to produce in-house ID cards. Comes with software, camera and Magicard Turbo card printer.

Read-in station for reading contactless ID data carriers for networked access control and time recording systems. Contactless data capturing via MultiAccess, EnterpriseAccess 2000 and Novatime (teach-in reader). The reader station is connected to the PC (e.g. COM 1) via the built in R232 interface. Reading station available for non-protected legic card (026488), for non-protected mifare card (026489) and for contactless cards (026490).

CyberLock CLP-100 USB programmer is designed primarily for use with a laptop computer to communicate with multiple locks in the field. It can download, update, and add new locks. The USB Programmer allows users to download locks if a key is lost or stolen, and update locks with lost key information.

Collar (spacer) for 3/4" cams, .375" length

CyberLock BOX-02 is a 4" x 4" x 4" junction box.

CyberLock BOX-03 is a 6" x 6" x 4" junction box.

CyberLock FS-PLATE-201 is a mounting plate for the Flex System CyberKey Vault module. It is compatible with the BOX-02 junction box.

Parabit 900-50000 is a voice over IP handset with modular connector that connects to computers sound card. It also includes: 36” Vandal Resistant Handset with Armored Cord and RJ II Modular Connection Chrome Handset Cradle VOiP Modular to 1/8” Phone Plug Interface Cable with Modular RJ II Jack Optional Hook Switch Available

Easikey Manager is an easy to use software administration system designed specifically for Municipal housing managers. It enables Easikey 1000N door controllers to be centrally administered from a PC sited in a housing office. PAC tokens can be added into the Easikey Manager software and thus it is no longer necessary for the housing manager to visit the housing blocks to carry out this function. Easikey Manager can administer unlimited housing blocks from a single PC. An unused token report can be generated to provide Health and abscondence information. The PC running Easikey manager software must be an entry level Microsoft Windows machine. Complete with desktop Easikey Manager administration reader and serial interface unit. Five year guarantee against electronic failure.

Long range reader NOT compatible with PAC readers and ID devices.

Four part reader/controller with turning unit and 2 sensor pods. Each unit is supplied with 3 metres of cable. Suitable for internal and external use. Combined weight is 3 kg. Uses Identec active tags. Requires the use of a PAC wiegand interface when used with the Easikey 1000 and the PAC 2100/1100 controllers. One year guarantee against electronic failure.

Integral reader and controller.

Operates like the ACC 50 but includes additional keypad for entering door code. If a serial printer is connected the time and date of the entry attempt are automatically recorded. Contactless reader with built-in authorisation querying designed to control a single door. Programming is extremely easy with the use of programming cards. Different authorisation rights may be assigned by connecting a simple timer switch.

Contactless reader with clock/data interface, 25 cm reading distance.

CyberLock FS-PLATE-101 is a mounting plate for the Flex System RFID module. It is compatible with the BOX-01 junction box.

Kit with DG-502 controller, 2x DGLP reader heads, GAER release kit or mini magnet, power supply unit and 10 keyfobs.

The asynchronic RS 232 host interface serves as a direct connection device between controllers, terminals as well as control units and RS 232 PC interface. 2,400 to 19,200 baud. Maximum line length 15m.

8 Input/2 Transistor Output in Metal Cabinet

BLP processor is compatible with most card technologies. BLP controls and monitors two doors (readers) with the option of up to 30 additional inputs and 14 additional outputs for alarm monitoring and control functions. Also provides global and local anti-passback and 1,000-event buffer. Networkable. Works with Barlock keypads and readers, RAAM and AXxess 202/Lite/Express & NS.

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(6.4-7.6), PC-73(11.4-14.0), PC-74(11.4-14.0), PC-76(7.6-11.4), PC-77(11.4-14.0). Metal compensated and mounted in a Single Gang Box. Compatible with PCSC controllers. Wiegand output.

The ATM Mini VAC provides security for automated teller machines users by ensuring that only authorized patrons have access to the vestibule. These reliable units unlock entrances to holders of bank cards and accommodate door operating hardware that is installed to assist physically challenged customers. If an optional buzzer is installed, the buzzer will sound to let patrons already inside the vestibule know that another user has entered. ATM Mini VAC is configured to read all valid Track 2 Magnetic Stripe cards, no extra programming required.

The design of Integrated Engineering’s SmartID™ readers reflects a movement towards the design and material requirements of modern architecture. SmartID™ provides contemporary designs in two shades of stainless steel, together with an easy way to manage the accessibility of critical places, people, goods and information, both for today and the future.  Offering a full product portfolio including SmartID™ ISO 14443 (up to level 4) readers:Mifare® serial number reader Mifare® read/write sector reader (optional 12 key pin pad) DESFire® reader (Common Access Card compliant) T=CL readerOther Smart ID™ standards include Hitag and EM4102.All readers are available with interfaces for the following output protocols: ISO 7811 (ABA / Clock & Data) and Wiegand, and seamlessly integrate with standard U.S. and European junction boxes.  In addition, the SmartTOUCH™ model combines smart card and biometric technology assuring both information and physical security.  This simple-to-use ‘dual authentication’ solution is achieved through the combination of a Mifare® and a fingerprint reader.  SmartTOUCH™ is uniquely programmed using a secured enrolment card instead of a PC.

Card enrolment station (without card reader) to enroll cards into a PC with software such as MOMENTUM, Velocity, SAM or S*NAP2.  Use with compatible reader heads.  Includes MATCH2, ES2 enrolment stand, cables and plug-in power supply.

16 Input/2 Transistor Output (PCB only)

8 Input/2 Transistor Output (PCB only)

Card enrolment station to enrol mag stripe cards into a PC with software such as MOMENTUM, Velocity, SAM or S*NAP2.  Includes MATCH2, mag stripe card reader, ES1 enrolment stand, cables and plug-in power supply.

8 Dry Contact Relay Add-on Module (PCB only)

Available with standard Wiegand and clock/data output. Operates as slave to the AP-500 master or AP-550 reader/controller. The 503 module comes with integral keypad.

DIGI*TRAC enrolment station - mag strip.  Card enrolment & programming station to directly enrol mag stripe cards into a single standalone DIGI*TRAC controller.  Includes ScramblePad, mag stripe card reader, ES2 enrolment stand, and cable.  Use with PR1 Printer.

Provides the system with added security by a third level of databse redundancy. The database can reside in the reader as well as in the host AAM/AAN controllers. Can perform access control autonomously should the communications with the controller be lost.

DIGI*TRAC enrolment station.  Card enrolment & programming station to directly enrol 125 kHz proximity cards into a single standalone DIGI*TRAC controller.  Includes ScramblePad, CR20L ProxPoint card reader, ES2 enrolment stand, and cable.  Use with PR1 printer.

8 Input Add-on Modules (PCB only)

8 Transistor Output Add-on Modules (PCB only)

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(203-25.4), PC-73(457-610), PC-74(457-610), PC-76(356-483), PC-77(457-610). Metal compensated wall mounted. Uses RS-232 control. Compatible with PCSC controllers. Wiegand output.