Access control systems & kits  (999)

Linux platform & Dual 1.0GHz CPU to provide a safe and stable performance  Comparison time less than 0.5s  Ergonomic design with new keypad provides a better user experience  Standard WiFi, Optional 3G  Provide relay output for standalone Access Control  Support Wiegand, RS485 and USB-host extended communication  HD and brighter 3.2 inch color display  Ease the experience of user by brand new UI design  PoE(Power Over Ethernet) fast & easy installation

Easyprox compact is an all-in-one battery powered lock and access control system that's perfect for securing internal doors - especially those that don't have an accessible power supply.  The system is exceptionally easy to install because its control electronics are housed within the reader and a battery power source replaces mains wiring.  Consequently installation times, costs and on-site disturbance are greatly reduced.  Battery power sourceElectronics housed within readerNo mains wiringEasy to install (less than 40 mins in some cases)Everything included in the boxSpare battery packs availableExternal contacts in case batteries run outAnother reason why Easyprox compact is such great value for money is because everything required to secure a door is included: reader/control unit, handle, lock, battery pack and fixings etc.  The unit is supplied with a tubular mortice latch and is surface mounted.  The system also has an anti-shim plunger that prevents entry using credit cards.  The use of energy saving technologies guarantees a huge battery life of five years based on 15 daily uses.  Easyprox compact uses standalone tokens that are compatible with Paxton Access' other standalone systems.  Introducing it to new and existing access controlled sites is therefore a convenient and economical solution.  The inclusion of Easyprox compact as part of a larger system can help to make your tender applications even more competitive. Offering the same conveniences as its token counterpart, Easyprox keypad controls entry by way of a code (or PIN) and will be available soon.Applications:Halls of residenceClassroomsDormitoriesMeeting rooms/officesStore roomsCupboardsDisplay cases/stock rooms

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(76-89), PC-73(152-203), PC-74(152-203), PC-76(114-140), PC-77(152-203). Uses RS-232 control. Compatible with PCSC controllers. Wiegand output.

Includes IEVO-MB10K controller and 1x IEVO-U reader Fingerprint capacity 10,000 templates Vandal resistant IP65-rated reader Multi-spectral imaging technology Visual and audible feedback

Morse Watchmans KeyWatcher 8 Key Module is an electronic key cabinet system. It contains 8 SmartKey locations. and is perfect for situations where there are multiple locations within a building or campus that need only a limited number of keys managed.

brass, not compatible with PAC readers & ID devices.

Based on Linux platform Houses 2.8-inch colour LCD and touch keypad Full capacitive touch keypad offers convenient operation experience Optional WIFI function

For use with Easikey 1000, PAC 1100/2200. Uses cards encoded with an 11 digit format on track 2. Can be mounted up to 50 metres from its controller and connects directly without the need for an interface. One year guarantee against electronic failure.

The single door access module is designed to provide an interface for a single reader head along with the required inputs and outputs for the control and monitoring of a single door. The module is supplied as a PCB only and may be incorporated into any suitable existing enclosure with another LAN module or an optional external power supply. The versatile hardware and software design allows Magnetic Swipe or Wiegand Reader formats to be configured. Simple programming options allow door access control to be integrated with area on/off control where required.

The AC-2010 Proximity Clocking Terminal is designed for time and attendance management in KeyMaster Pro or KeyMaster Lite access control systems. It is compatible with Controlsoft AC-400x, AC-4100 and AC-310x system controllers. Key features include an integrated proximity reader, a keypad, LCD screen, digital I/O capability, and support for an external Wiegand card reader. KeyMaster Pro™ 3.1 & KeyMaster Lite™ 3.0 support.

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(76-89), PC-73(152-203), PC-74(152-203), PC-76(114-140), PC-77(152-203). Uses RS-232 control. Compatible with PCSC controllers. Wiegand output.

Pointprox low profile surface 2m screened cable. May be connected to any of the Progeny access controllers.

The E3-Series embedded browser-based network appliances make advanced security technology reliable and affordable for any entry level access control application. Both the Essential and Elite can be seamlessly scaled up, via software keys, to other eMerge E3-Series systems providing increased door and reader capacity, enhanced features, and higher level capabilities.These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyse reports, and monitor the system remotely from any web browser.

The DIU 230 delivers power and Ethernet communications via CAT5/6 Ethernet cable, eradicating the need to provide local mains power at the door. When combined with the AC2000 product range, the DIU 230 offers a complete IP-based access control solution.The DIU 230 has an output of 2 Amps, providing power to support up to 2 complete door sets (consisting of entry and exit readers, heavy duty Maglock, door holder, sounder and strobe).  The DIU 230 also features:Battery backup allows continued door functions even with loss of communications to host.Tamper alarm inputs on board.Can be used in conjunction with the eDCM300 series of door controllers.The DIU 230 provides a cost-effective way of bringing power to the door. The DIU 230 installation is classed as low voltage and can be completed by security integrators and IT network installers without the expense of an electrician or electrical contractor.

Linear prox.pad wiegand 125 kHz proximity reader with keypad is a stand alone proximity reader and keypad that can be directly mounted to a single-gang electrical box or to most flat surfaces. The prox.pad provides standard access control functionality with the use of its two relays and two inputs for request to exit and door position. By utilising the proximity reader and keypad together, a higher level of security is achieved by requiring both to grant access. The prox.pad can be used for stand alone access control, or used as a reader for IEI access systems or most Wiegand systems. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the prox.pad.

Linear prox.pad plus integrated proximity reader and controller with keypad. The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position, and enhanced system functionality when used with Hub Manager Professional software. The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality. The software can communicate to the prox.pad plus either through a 485 connection, or on a LAN/WAN using the SEG-1 TCP/IP communication device.

1 door controller for Aritech ACI reader applications. Optional power supply. Built-in communication with PC, modem or hand-held programmer. Built-in memory with battery backup.

VSK electronics offers state-of-the-art multi-application security systems for access control, digital video recording, intruder and fire detection, based on 25 years of experience in multi-site security systems.At this years IFSEC exhibition, VSK electronics launched a new generation of FOXnet® security panels and FOXeye® for streaming video and audio.FOXnet® security panels seamlessly integrate Access Control, Intruder Detection, Vault, Interlock, ATM control and Technical Alarm: New hardware with boosting performance: 10/100 Mb Ethernet connection, plug-in modems and two way full duplex audio Together with the Digital Video recorder and transmitter FOXeye® a perfect solution for single and multi-site organisations – banks, Petrol Filling Stations, Supermarkets, Telecom nodes, Schools, Office Buildings…FOXeye-S ®  is a digital multimedia  transmitter and recorder for networked and multi-site security environments, featuring:MPEG 4 streaming video and bi-directional audio  Low bandwidth consumption High quality video Modular software packages allow full management of FOXnet® and FOXeye-S® panelCorporate management software for on-line bi-directional communication over LAN/WAN networks. Real time management of alarms , access control and video for multi-site environments Site manager for full management of one site.

Use as a stand-alone programmer with readers or use as an enrolment station for VEREX Technology's MONITOR ISM. Format options include 26-bit (industry standard) or 36 bit VEREX Technology format. Eliminates the need for inventory of pre-programmed cards. Easy to install and upgrade software. Anti-takeover secure lock code. Reader configuration cards.

The Crypag perosnal card tag is an active radio device. Communication between tag and reader is scrambled. Battery low indication. Average key life 5 years or more (based on 6 minutes continuous use/day). 28g. Reading range dependent in aerial. One year guarantee against electronic failure.

100 guest cards, door monitoring, keyboard used to set unset alarms.

Inova PDC Multi format controller with integral keypad. Single door controller which supports magnetic stripe, wiegand and proximity readers. Alarm, tamper and unlock relays. RTE switch and exit reader inputs. RS485 data link. Various entry modes. Selectable door release times. Programming via on-board keypad or from on-line host. Non volatile memory. Provision for two readers enabling controlled entry and exit. Integral communications when linked to a PC or Inova PrintServer.

requires 2131 flush box or 2132 surface. Also available as panel mount. Can be connected to any Progeny access controllers.

A fully supervised, addressable SDI/SDI2 bus device that allows access control integration for Bosch compatible control panels Direct interface to compatible Wiegand card readers On-board buzzer output and supervised on-board points Request to Exit and Request to Enter inputs that can have a shunt only option Four door states: Locked, Unlocked, Secured, Fire Unlock In a combination Fire/Intrusion system, it should not be used to lock doors used for emergency egress unless these doors have a mechanical release mechanism

Includes IEVO-MB10K controller and 2x IEVO-U reader Fingerprint capacity 10,000 templates Vandal resistant IP65-rated reader Multi-spectral imaging technology Visual and audible feedback

Includes eXcel 2 controller, two eXprox readers and 50 cards.  eXguard eXpress software included.

Input/output module for use in auxiliary alarm or event applications. It has eight end of line inputs and 8 voltage free relay outputs. Can be mounted up to 1000 metres from its controller (PAC 1100/2100 & PAC 2200). White metal enclosure. 5 year guarantee against electronic failure.

Morse Watchmans Remote Box is a vailable in wall mount or desktop variations. It can replace the standard bottom mounted control box, or can be used in conjunction with the bottom mount control box so the system has a dual keypads and displays. It is useful for when the KeyWatcher needs to be mounted in a secure area such as a control room or vault and users need to be able to input their login information without entering the room.

Rosslare's convertible line unites its readers and stand-alones into one family, incorporating all products' functionalities, types and work modes. Following their successful integration, all products in this unique convertible line serve dual functionalities as both readers, and 500-user keypads. When connected to a Rosslare intelligent Secure Power Supply (PS-x15T or PS-x25T), each unit automatically converts into a full-feature 500-user access controller, with superior security due to the separation of keypad and the controller unit. The same product functions as a reader with diverse attributes when connected to a standard access controller, supporting 26-bit Wiegand, and Clock & Data and transmissions. All units are flexible to integrate, and offer further security by rejecting any wire tampering attempts.One stock, limitless possibilitiesFit for all access control applications from residential and commercial, to large-scale applications, our convertible product line is the answer to a wide variety of installations. Used in the home & in small businesses as an access control entrance keypad that extends the alarm system, or as readers in a large installation compatible with any access controllers - the options are indefinite. All the benefits of two-in-oneSecured operation - unreachable security using supervised digital communications to the keypad rejects wire tampering or power shortage attempts Large product range - from outdoor fully potted plastic units and metallic anti-vandal keypads, to new ultra-slim designer keypadsReduction of stock levels and inventory hassle - one product functions as twoTime savings - less products to learn and specialize in Money savings - in addition to manpower all units are priced same as readers, and the combined unit with power supply is priced as the stand-alone Common featuresFully-potted for outdoor usePatented, unique blue backlit illumination (some models)Built-In 125 KHz ASK EM Proximity card reader (some models)Highly-Sensitive optical back tamper and case tamper protection.Internal buzzer provides audible interface feedbackTwo Status / Programming Interface LED indication Lockout feature on wrong entries (Keypad / Card Tamper)

for card printing

The 2100 Reader Inhibitor Module is used to disable a reader attached to the PAC 2100/1100 door controllers under certain conditions. It is designed to plug directly into a reader channel on the door controller and can be operated by anything which supplies a switching 12V (e.g. an alarm panel, mechanical switch etc.) at 20mA. A Reader Inhibitor is required for each reader to be disabled. When activated the Sig and RTE to the reader are broken and the reader disabled. Overrides such as breakglasses are not affected. Located in the door controller enclosure or other secure location. Five year guarantee against electronic failure.

The AIM Alarm Interface Module allows third party intruder alarm panels to be integrated with PAC access control systems without the need to modify the firmware of either system. The AIM allows you to use the access control system to specify who can arm/disarm the alarm system. Reduces false alarms as, when the system is armed, access to a building/area is restricted to those users who can disarm the system. Simplifies the arming/disarming procedure. Identifies who arms/disarms the system - each time a key is presented to a reader this is recorded by the access control system. Located in the door controller enclosure or other secure location. Five year guarantee against electronic failure.

Softline Chip card reader - Clock/Data interface, for ACT and ACS-1.

This is essentially a powered version of the standard PAC ID device (electronic key/card), and is designed to be fitted to the underside of vehicles. It is a totally sealed potted construction suitable for underside vehicle mounting using either No 6 self-tapping screws or M4 bolts. The mounting centres on the transmitter are 84mm apart. Unique coding - 68 billion combinations. 5 year guarantee against electronic failure.

The Crypag perosnal card tag is an active radio device for fitting to vehicles. Communication between tag and reader is scrambled. Battery low indication. Average key life 5 years or more (based on 6 minutes continuous use/day). 28g. Reading range dependent in aerial. One year guarantee against electronic failure.

The PAC PIN Interface (with keypad) provides a means of adding extra security to installations using the PAC 2100/PAC 1100 door controllers. As well as using their PAC key/card (or other ID device) to gain access through a door, a 4-digit PIN number must also be entered. The PIN number is derived from the code stored in the key/card and cannot be changed. The use of a PIN may be optionally controlled by a time profile - i.e. at certain times/days the key or card only need be used, outside those hours the PIN must also be entered. Built in sounder to acknowledge key presses. Can be mounted up to 1000m from the door controller. Suitable for internal and external use. Five year guarantee against electronic failure.

The PIN Interface without keypad is supplied with an 8-core flying lead, 2 metres in length. These can be connected to a suitable third party keypad. The keys of the keypad must be arranged into a three column by four row matrix, the keys themselves should have normally open contacts. It provides a means of adding extra security to installations using PAC 2100/PAC 1100 door controllers. As well as using their PAC key/card to gain access through a door, a 4-digit PIN number must also be entered. The PIN number is derived from the code stored in the key/card and cannot be changed. The use of a PIN may be optionally controlled by a time profile i.e. at certain times/days the key or card only need by used, outside those hours the PIN must also be entered. Built in sounder to acknowledge key presses. Can be mounted up to 1000m from the door controller. Suitable for internal and external use. Five year guarantee against electronic failure.

This is a potted module located in the door controller enclosure or other secure location. It is used to disable a reader under certain conditions. It can be used with any PAC door controller and can be operated by anything which supplies a switching 12V (e.g. and alarm panel, mechanical switch etc.) at 20mA. A Reader Inhibitor is required for each reader to be disabled. When activated the Sig and RTE to the reader are broken and the reader disabled. Overrides such as breakglasses are not affected. Five year guarantee against electronic failure.

boxed, large

boxed, large