Access control systems & kits  (1,115)

Parabit 900-00007 is a mini display telephone that features: Aluminum, stainless steel and acrylic construction Handset composition: lexan Vandal resistant construction

Parabit 900-50003 is a mini display telephone that provides counter top to write on.

CyberLock TIP-008 is a replaceable case for the CK-RXD CyberKey smart key.

CEM AC2000 Biometric Enrolment provides a single biometric and card validation process using the AC2000 systems. AC2000 allows users to predefine a “Bio NOT Required” Timezone. This Timezone allows the S610f fingerprint readers to provide card only access, rather than card plus fingerprint, during certain times of the day.

Parabit 200-10058 is a tamper switch.

Parabit 200-10136 is a ACS-1 power supply.

The Reader Combiner allows two PAC proximity readers to be used on the same door channel. May be used with a car park barrier with one reader for cars and the other for lorries. Only one reader may be used per PAC 2100/1100 without the need for an external power supply. 5 year guarantee against electronic failure. Not compatible with the Easikey range of products.

PC interface kit allows PAC-encoded magnetic stripe cards to be administered into the PAC for Windows system. Complete with PAC magnetic stripe reader and interface unit.

This passive infra-red (PIR) RTE switch detects a person approaching a door and unlocks it automatically. With an adjustable head and integral LED. Fitted above the door in a horizontal position. Black colour -model 832.

The Upload kit allows existing stand alone Easikey 99 or Easikey 1000 units to be connected to a PC to upload tenants token codes into Easikey Manager software without the need to retrieve tokens from the tenants.

SRS Smart kit with SA99 control unit with built in power supply and battery charger (40012001), HID proximity reader (6008AGP), lock release (615112 & plates), and 10 x Proximity cards(1326).

Parabit 200-20044 is ACS-1E Kit with insert reader kit that includes: ACS-1E control panel in standard case 40’ of 8 conductor 22 ga. shielded card reader cable Insertion instructional decals ACS-1E control panel power supply Direct connect ACS-1E control Panel configuration card reader Flush mount design

Parabit 200-20003 is an ATM access control kit that includes: ACS-1 Control Panel in Standard Case Serial Port 40 ft. Card Reader Cable Power Supply Instructional Decal Set

Parabit 200-20005 is an ATM access control kit that includes: ACS-2 control panel in standard case Swipe card reader IP adapter 40 ft. card reader cable Power supply Instructional decals

Parabit 200-20007 is an ATM access control kit that includes: ACS-2 control panel in standard case Insert card reader IP adapter 40 ft. card reader cable Power supply Instructional decals

Parabit 200-10077 is an ACS-2 control panel for ATM facilities management and remote monitoring.

Parabit 900-00000 is a vandal resistant flush mount phone with keypad. It features aluminium and stainless steel construction. It has fraudulent call deterrent design and is password protected. It is remotely programmable.

Parabit 900-00004 is a flush mount hands-free phone that features: Aluminum and stainless steel construction Vandal resistant construction Push button activated

CyberLock HDP250 is an end cap for the CK-RCG and CK-RXD CyberKey smart keys.

Parabit 900-50002 is an analogue auto dialer telephone parts kit that features: Hook Switch Activated Line Powered Password Protected Fraudulent Call Deterrent Design Remotely Programmable with Any Touch Tone Telephone

Parabit 200-10023 is an ACS cable cut sensor board.

Parabit 200-10025 is an ACS-2 modem.

Front programming panel with built-in PAC magnetic stripe reader for use with controllers on systems where magstripe readers are used.

Front programming panel with built in KeyPAC proximity reader for use with controllers on systems where KeyPAC readers are used.

The Inova central manager system allows direct and remote (via modem) connection of Inova Site Controllers with full programming flexibility. A number of sites can be identified in configuration (using a 6-digit unique number), and connected directly to the COM port or a PC or to a modem on a PSTN telephone line. Full control of all doors is possible, along with network capable card administration software to allow LAN operation of the system.

Kit with PROMI-500 or DG-Prox reader/controller, GAER release kit or mini magnet, power supply unit and 10 keyfobs.

14 way alarm input board. Selectable N/O or N/C from software. LED status indicator. Address setting from DIP switch. Hooks onto RS485 bus.

14 way relay output board. Normally open, closes on alarm. LED status indicator. Address setting from DIP switch. Hooks onto RS485 bus.

This card can be used to connect the ACS-1 directly to a modem. It is supported by software version V.05.XX and upgrades.

The ethernet interface(10 Mbits/s) connects time recording terminals and access control devices to a TCP/IP network. The fast ethernet interface 026840.26 (10/100Mbits/s) connects time recording terminals and access control devices to a TCP/IP network.

Read-in station for reading contactless ID data carriers for networked access control and time recording systems. Contactless data capturing via MultiAccess, EnterpriseAccess 2000 and Novatime (teach-in reader). The reader station is connected to the PC (e.g. COM 1) via the built in R232 interface. Reading station available for non-protected legic card (026488), for non-protected mifare card (026489) and for contactless cards (026490).

FS-MP01 is a keyport module that allows a key to exchange information via a network.

CK-RBT is a user key featuring rechargeable battery and replaceable tip.

Specifically designed to connect current building alarm systems to the Paxton10 building intelligence system Based on the alarm status, it can control other appliances within the building to take appropriate action such as opening fire doors in the event of a fire alarm Can also set or unset an intruder alarm, based on opening or securing the building at the beginning or end of the day Fault finding LEDs

Parabit 200-20022 is an ATM access control kit that includes: ACS-1 Control Panel in Standard Case 40 ft. Card Reader Cable Power Supply Insert Card Reader Remote ACS Card Reader SkimGard Logic Board Instructional Decal Set

CyberLock A-U220 is a 220 V, 50Hz USB station transformer.

Parabit 900-50005 is a mini display telephone that converts surface mount wall phone to counter top phone.

Parabit 900-50004 is a mini display telephone and privacy panel that provides counter top to write on.

CyberLock TIP-001 is a replaceable tip for the CK-IR7 and CK-RBT CyberKey smart keys.

CyberLock TIP-010 is a replaceable case for the CK-RXD2 CyberKey smart key.