Access control systems & kits  (1,065)

Parabit 900-00009 is a surface mount inmate phone that features: Stainless steel and galvanised steel construction Black lexan handset with 36”armored cable Power transformer: 12VDC 1.5A Phone line not required Chrome plated cast metal mechanical hook-switch Vandal resistant construction

The RTE switch is for fitting on the secure side of any door to allow exit through the door. Compatible with an MK single gang back box.

Four part reader/controller with turning unit and 2 sensor pods. Each unit is supplied with 3 metres of cable. Suitable for internal and external use. Combined weight is 3 kg. Uses Identec active tags. Requires the use of a PAC wiegand interface when used with the Easikey 1000 and the PAC 2100/1100 controllers. One year guarantee against electronic failure.

Cryptag Census reader connects directly to the PAC 2100 controller. Multiple tag reading of 30 tags / second. Direction sensing available. Suitable for internal or external use. One year guarantee against electronic failure.

Reader for use with CEM access control systems. Three LED indicators to visually confirm or deny entry. Suitable for inddor and outdoor installation. Supports Entry/Exit configuration for IN/OUT control with optional Exit reader. Housed in single polycarbonate enclosure. 4 inputs to monitor alarms such as door held/forced condtions and secure side exit push button operation.

Interface, without electrical isolation, for extending a RS 485 network. It can be integrated, for example, in every ACS-8 basic unit or in each time recording terminal. Model 026693 available as interface with electrical isolation.

Mifare reader with keypad, and with RS485 interface, 3-5 cm reading distance. Model 026494 available without keypad. It comes with date/clock interface.

CKS-016 is a recharging station designed to recharge the lithium-ion polymer battery in rechargeable CyberKey smart keys.

Morse Watchmans KeyWatcher Touch 8 Key Module is for larger keys and small to medium-sized key rings.

Parabit 200-20044 is ACS-1E Kit with insert reader kit that includes: ACS-1E control panel in standard case 40’ of 8 conductor 22 ga. shielded card reader cable Insertion instructional decals ACS-1E control panel power supply Direct connect ACS-1E control Panel configuration card reader Flush mount design

Parabit 200-20024 is an ATM access control kit that includes: ACS-2 control panel in standard case 10/100 ethernet adapter 40 ft. card reader cable Override toggle switch Power supply Black insert card reader w/ SkimGardTM technology Featuring: 3 point fraud detection system (Overlay/Tamper/Cable Cut) Remote ACS card reader SkimGard logic board Instructional decals

CyberLock BOX-01 is an indoor/outdoor single gang box.

CyberLock HDP237 is a black end cap for the CK-RCG and CK-RXD CyberKey smart keys.

CEM AC2000 Biometric Enrolment provides a single biometric and card validation process using the AC2000 systems. AC2000 allows users to predefine a “Bio NOT Required” Timezone. This Timezone allows the S610f fingerprint readers to provide card only access, rather than card plus fingerprint, during certain times of the day.

Parabit 200-10012 is an ACS-2 IP circuit board.

Parabit 200-10062 is an ACS-2 riser card.

The Reader Combiner allows two PAC proximity readers to be used on the same door channel. May be used with a car park barrier with one reader for cars and the other for lorries. Only one reader may be used per PAC 2100/1100 without the need for an external power supply. 5 year guarantee against electronic failure. Not compatible with the Easikey range of products.

The design of Integrated Engineering’s SmartID™ readers reflects a movement towards the design and material requirements of modern architecture. SmartID™ provides contemporary designs in two shades of stainless steel, together with an easy way to manage the accessibility of critical places, people, goods and information, both for today and the future.  Offering a full product portfolio including SmartID™ ISO 14443 (up to level 4) readers:Mifare® serial number reader Mifare® read/write sector reader (optional 12 key pin pad) DESFire® reader (Common Access Card compliant) T=CL readerOther Smart ID™ standards include Hitag and EM4102.All readers are available with interfaces for the following output protocols: ISO 7811 (ABA / Clock & Data) and Wiegand, and seamlessly integrate with standard U.S. and European junction boxes.  In addition, the SmartTOUCH™ model combines smart card and biometric technology assuring both information and physical security.  This simple-to-use ‘dual authentication’ solution is achieved through the combination of a Mifare® and a fingerprint reader.  SmartTOUCH™ is uniquely programmed using a secured enrolment card instead of a PC.

CKS-F16 is a recharging station designed to recharge the lithium-ion polymer battery in rechargeable CyberKey smart keys.

AH-W2 is a CyberKey web authoriser hub allows programming and downloading keys from a remote location. The web authoriser hub allows remote key communications either via LAN or over the internet.

Parabit 200-20003 is an ATM access control kit that includes: ACS-1 Control Panel in Standard Case Serial Port 40 ft. Card Reader Cable Power Supply Instructional Decal Set

Parabit 200-20026 is an ATM access control kit that includes: ACS-2 control panel in standard case Modem 40 ft. card reader cable Override toggle switch Power supply Black Insert card reader w/SkimGardTM technology Featuring: 3 point fraud detection system (Overlay/Tamper/Cable Cut) Remote ACS card reader SkimGard logic board Instructional decals

CyberLock A-U120 is a 120 V, 60Hz USB station transformer.

CyberLock CK-CAP-010 is a 10 pack key tip cap.

CyberLock TIP-001 is a replaceable tip for the CK-IR7 and CK-RBT CyberKey smart keys.

Parabit 200-10023 is an ACS cable cut sensor board.

Parabit 200-10025 is an ACS-2 modem.

Parabit 200-10136 is a ACS-1 power supply.

Front programming panel with built in KeyPAC proximity reader for use with controllers on systems where KeyPAC readers are used.

This passive infra-red (PIR) RTE switch detects a person approaching a door and unlocks it automatically. With an adjustable head and integral LED. Fitted above the door in a horizontal position. Black colour -model 832.

Easikey Manager is an easy to use software administration system designed specifically for Municipal housing managers. It enables Easikey 1000N door controllers to be centrally administered from a PC sited in a housing office. PAC tokens can be added into the Easikey Manager software and thus it is no longer necessary for the housing manager to visit the housing blocks to carry out this function. Easikey Manager can administer unlimited housing blocks from a single PC. An unused token report can be generated to provide Health and abscondence information. The PC running Easikey manager software must be an entry level Microsoft Windows machine. Complete with desktop Easikey Manager administration reader and serial interface unit. Five year guarantee against electronic failure.

Model DGLP is of ABS construction while model DGLI is of stainless steel. LED status indicator. Controller not included. 1 reader per controller.

Access control for high security and general applications.

PCSC launched the first all-in-one system with 21 direct connect zones and automatic deactivation of zone groups by authorized cardholders, providing a system with virtually no false alarms on entry.  Benefiting from PCSC's 21 years of experience in access control, the iAM offers features and functions not available in comparable systems.  Service and user programming is accomplished with a self-loading, easy to use Windows based software application, LiNC-Ez.  Most parameters, such as cardholders, zone groups, time periods and holidays are factory defaulted – the only custom setting required is the central station phone number.  Utilizing PCSC's innovative high security 5 State Alarm Monitoring logic, the iAM provides the most accurate alarm monitoring for intrusion and access control devices. Additional system features include guard tour management - capable of recognizing a guard and notifying the central station when the special guard card is presented at a customer's site, but access will not be granted unless the system is in an alarm state.Alarm monitoring features include:  21 Alarm Zones, automatic alarm zone group deactivation by cardholder, automatic daylight savings control, automatic holiday control, 99 user definable zone groups, 99 user defined PIN (4 or 5 digits), supervised bell output, supervised enclosure tamper, contact ID central station communication, user defined zone names, user defined zone groups, user selectable zone state (supervised or non-supervised) and individual zone calibration control. 

Read-in station for reading contactless ID data carriers for networked access control and time recording systems. Contactless data capturing via MultiAccess, EnterpriseAccess 2000 and Novatime (teach-in reader). The reader station is connected to the PC (e.g. COM 1) via the built in R232 interface. Reading station available for non-protected legic card (026488), for non-protected mifare card (026489) and for contactless cards (026490).

When connecting to a computer, the USB-SER provides Keyscan system compatibility and offers RS485 to USB conversion as well as RS232 to USB conversion all on one compact easy to use device. The USB-SER is ideal for technicians, on the road demonstrations and instances where the access control computer does not have a serial communication port.

FS-KD01 is a keypad display module used to provide feedback, instructions, and warnings.

CKS-010 is a recharging station designed to recharge the lithium-ion polymer battery in rechargeable CyberKey smart keys.

Morse Watchmans Card Module consists of thin slots to accomodate credit cards, debit and proximity cards, and visitor badges.

Parabit 200-20001 is an ATM access control kit that includes: ACS-1 Control Panel in Standard Case Swipe Card Reader Serial Port 40 ft. Card Reader Cable Power Supply Instructional Decal Set