Access control systems & kits  (1,017)

CEM SYS/650/064 is an AC2000 Lite System Server - Dell Server with 64 door licence.

Proximity reader/controller. Programming via master code. LED and audible status indicators.

The ACD contactless operates as an autonomous access control system in conjunction with a commercially available door lock. Access control rights can easily be changed using the associated programming card set. The door lock continues to operate mechanically in the usual way. The external handle is freewheeling and will not engage until an authorised ID card has been read. The door release time can be set at 3, 8, 12 or 20 seconds. Power is supplied by 3 miniature cells.

Parabit 200-10001 is an override switch.

The design of Integrated Engineering’s SmartID™ readers reflects a movement towards the design and material requirements of modern architecture. SmartID™ provides contemporary designs in two shades of stainless steel, together with an easy way to manage the accessibility of critical places, people, goods and information, both for today and the future.  Offering a full product portfolio including SmartID™ ISO 14443 (up to level 4) readers:Mifare® serial number reader Mifare® read/write sector reader (optional 12 key pin pad) DESFire® reader (Common Access Card compliant) T=CL readerOther Smart ID™ standards include Hitag and EM4102.All readers are available with interfaces for the following output protocols: ISO 7811 (ABA / Clock & Data) and Wiegand, and seamlessly integrate with standard U.S. and European junction boxes.  In addition, the SmartTOUCH™ model combines smart card and biometric technology assuring both information and physical security.  This simple-to-use ‘dual authentication’ solution is achieved through the combination of a Mifare® and a fingerprint reader.  SmartTOUCH™ is uniquely programmed using a secured enrolment card instead of a PC.

The interface converter serves as an interface between PC and RS485 network in access control and time recording systems. A maximum of 8 control units / terminals can be connected. This interface converter is equipped with one RS 232 interface connection on the input and two RS 485 interface connections wired in parallel (option between three-wire and five-wire) on the output. In addition, it is provided with a power supply unit (built into the RS 485 plug output) with 12V / 0.8A DC.

Morse Watchmans Keywatcher 3 Key Module is an electronic cabinet system that accepts all standard KeyWatcher modules. It contains up to 48 SmartKey locations per cabinet, and supports additional cabinets. It is is expandable, if future growth demands the need for more keys, modules or add-on cabinets can be added to increase the capacity of the system. Additionally, it comes standard with the bottom mounted control box, but can be used with a remotely mounted keypad and display box. Its module includes 6, 8 & 16 location SmartKey modules, Card/Credit Card module, Single and Dual Locker modules.

Ideal for securing larger objects such as laptops, mobile phones, cash trays, hand-held radios, weapons, data terminals, personal items, and more Start with a single cabinet, or configure a system with multiple locker cabinets Designed with scalability in mind, each additional metal locker storage unit can be controlled by a single console and monitored by the advanced KeyPro III™ software Has a built-in RS-232 communications port for direct connectivity to printers and other devices, or networked connectivity via Ethernet

Keyscan’s NETCOM2P and NETCOM6P (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate over a network. Both NETCOM2P and NETCOM6P (encrypted) communication modules connect directly to the ACU or, for legacy systems, the CB-485 communication module allowing you to establish communication along an existing LAN/WAN network.

MK-01, a CyberKey authoriser mini-keyport is part of the CyberKey authoriser system.

Parabit 900-00008 is a flush mount inmate phone that features: Stainless steel and galvanized steel construction Black lexan handset with 36”armored cable Power transformer: 12VDC 1.5A Phone line not required Chrome plated cast metal mechanical hook-switch Vandal resistant construction

Reader for use with InfoProx and EtherProx card readers. Three LED indicators to visually confirm or deny entry. Suitable for inddor and outdoor installation. Supports Entry/Exit configuration for IN/OUT control with optional Exit reader. Housed in single polycarbonate enclosure. 4 inputs to monitor alarms such as door held/forced condtions and secure side exit push button operation.

Keyscan has designed the CIM-Link, a TCP/IP companion module, which incorporates multiple CIM CAN Bus communication loops into a single global infrastructure. This promotes even greater global communication flexibility. Keyscan’s CIM-Link module extends CAN Bus based ACU to ACU communication via a common LAN/WAN network. This maximizes system design options by expanding ACU to ACU functionality to multiple independent CAN Bus global networks utilizing common LAN/WAN (TCP/IP) infrastructure.

CK-IR7-ROHS is an user key with replaceable battery and tip.

Use with Compact systems Provides 1 pair of volt free contacts Use to control external equipment

Allows more monitors to be connected to the Entry system It is connected to the system using one of its network ports and communicates using IPv6

CyberLock TIP-004 is a replaceable case for the CK-RCG CyberKey smart key.

CEM SYS/650/128 is an AC2000 Lite System Server - Dell Server with 128 door licence.

SRS Software Starter kit with DC2000 control unit with built in power supply and battery charger (40010022), HID proximity reader (6008AGP), battery, 50 x Proximity cards (1326), 1 x SRS SMART.net software (40010010) and 1 x Protocol convertor (40010012).

CEM SYS/500/001 is an AC2000 Lite System Server licence upgrade from 64 to 128 doors.

KeyPAC Central Network Controller for use with PAC for Windows. Allows PAC for Windows to communicate with PAC door controllers via the PAC six wire bus and 3 RS-232 ports. Built-in KeyPAC reader to enable KeyPAC cards or tokens to be administered into the PAC for Windows system. Complete with power supply and battery back-up facility.

2 part reader head comprising an AM1 reader head and injection moulded slimline ABS housing. Suitable for internal or external use. Red and green LED indicators. Weight: 1.5kg. Requires the use of a PAC wiegand interace when used with the Easikey 1000 and the PAC 2100/1100 controllers. 1 year guarantee against electronic failure.

Interface, without electrical isolation, for extending a RS 485 network. It can be integrated, for example, in every ACS-8 basic unit or in each time recording terminal. Model 026693 available as interface with electrical isolation.

Mifare reader with keypad, and with RS485 interface, 3-5 cm reading distance. Model 026494 available without keypad. It comes with date/clock interface.

Can program and charge both missioned and issued CyberKeys Serves as the interface between CyberLock hardware and CyberAudit management software

Parabit 200-10136 is a ACS-1 power supply.

The Reader Combiner allows two PAC proximity readers to be used on the same door channel. May be used with a car park barrier with one reader for cars and the other for lorries. Only one reader may be used per PAC 2100/1100 without the need for an external power supply. 5 year guarantee against electronic failure. Not compatible with the Easikey range of products.

Four part reader/controller with turning unit and 2 sensor pods. Each unit is supplied with 3 metres of cable. Suitable for internal and external use. Combined weight is 3 kg. Uses Identec active tags. Requires the use of a PAC wiegand interface when used with the Easikey 1000 and the PAC 2100/1100 controllers. One year guarantee against electronic failure.

Cryptag Census reader connects directly to the PAC 2100 controller. Multiple tag reading of 30 tags / second. Direction sensing available. Suitable for internal or external use. One year guarantee against electronic failure.

HID proximity reader for use with INOVA PDC controller. Read ranges varies from 25 to 120 mm depending on application and card/token used.

Reader for use with CEM access control systems. Three LED indicators to visually confirm or deny entry. Suitable for inddor and outdoor installation. Supports Entry/Exit configuration for IN/OUT control with optional Exit reader. Housed in single polycarbonate enclosure. 4 inputs to monitor alarms such as door held/forced condtions and secure side exit push button operation.

Card enrolment station (without card reader) to enroll cards into a PC with software such as MOMENTUM, Velocity, SAM or S*NAP2.  Use with compatible reader heads.  Includes MATCH2, ES2 enrolment stand, cables and plug-in power supply.

FS-SH01 is a flex system hub, which fetches and stores CyberKey programming and door access permissions from CyberAudit software and controls the Flex System modules connected to it.

CK-IR7C is a control key for CL-LF01 and CL-SF03 only featuring replaceable battery.

CKS-016 is a recharging station designed to recharge the lithium-ion polymer battery in rechargeable CyberKey smart keys.

Parabit 900-00002 is a flush mount phone with keypad that features: Aluminum and stainless steel construction Handset composition: lexan Vandal resistant construction

Parabit 900-00003 is a surface mount auto dial phone that features: Aluminum and stainless steel construction Handset composition: lexan Vandal resistant construction

CEM AC2000 Biometric Enrolment provides a single biometric and card validation process using the AC2000 systems. AC2000 allows users to predefine a “Bio NOT Required” Timezone. This Timezone allows the S610f fingerprint readers to provide card only access, rather than card plus fingerprint, during certain times of the day.

W73333: 1.5 Amp Power Supply in metal box. W73482: Request to exit switch. W73323: Printer connection kit. W73322: Door strike inhibitor kit.

Used as part of the AC2000 IP access control system. Three LED indicators to visually confirm or deny entry. Suitable for inddor and outdoor installation. Supports Entry/Exit configuration for IN/OUT control with optional Exit reader. Housed in single polycarbonate enclosure.