Access Controllers (668)
Leverages 4-post IT racks or standard 2-post Telco racks Includes all the necessary components required to control up to 16 doors, in one enclosure Supports 16 RM readers with integral lock power Front panel LCD and LEDs enable quick diagnostics and troubleshooting Hinged cover provides easy access to diagnostic port Dual network LAN ports offer redundant network connection Fully compatible with C•CURE 800/8000 and C•CURE 9000 Supports multiple cards per cardholder and multiple card formats including PIV II extended formats
Add to CompareACM board Supports up to eight Wiegand, RM or OSDP readers, 16 supervised inputs, and 8 outputs dry-configured Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware
Add to CompareACM board in 4U rack mount enclosure Supports up to eight Wiegand, RM or OSDP readers, 16 supervised inputs, and 8 outputs dry-configured Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware
Add to CompareISONAS Inc. will move to an open platform access control solution. ISONAS has been providing access control solutions that effortlessly integrate with many other systems including access control software. The company will now take these integrations to the next level by partnering with some of today’s leading access control software manufacturers launching the first integration in July 2016. De facto standard for access control hardware ISONAS continues to set the standard for access control and with the launch of its new hardware product line, brand new software platform and open platform philosophy; customers can be freed from proprietary, closed systems that are expensive, and provide limited solutions. “Customers want the benefits that only our Pure IP hardware can provide, a simple and cost effective solution. With our commitment to an open platform, customers will have choice in their software solutions and whether that’s our new Pure Access cloud based solution or one of our integration partners, they win. This puts ISONAS hardware in the position to become the de facto standard for access control hardware in the industry,” states Rob Mossman, CEO of ISONAS. The simple topology of a Pure IP solution - an ISONAS reader-controller and a CAT 5 for power and data - allow flexibility that panel or IP-enabled panel systems cannot. The open platform enables customers to fully customise a security solution with access control software integrations or even video management systems. Pure IP access control enables customers to do things they never thought possible. Whether used as a standalone product or with the Pure Access software, the new ISONAS Pure IP hardware platform, with Bluetooth Low Energy (BLE) capability, delivers an entirely revamped aesthetic and forward functionality that increases flexibility for the customer in how and where their access control is installed. The ISONAS reader-controller will continue to be an all in one device and lead the industry in reader and controller technology.
Add to CompareThe Symmetry EN-1DBC+ is a powerful IP enabled access control edge device which provides advanced functionality to control any door. The built-in Power-over-Ethernet (PoE+) capability eliminates the need for a separate electric power supply and can substantially reduce installation cost per door. The cost effective EN-1DBC+ is supplied in a small tamper monitored polycarbonate enclosure which will normally be installed on the wall on the secure side of the door.
Add to CompareAC-225 is suitable for applications with up to 30,000 users across a modular 2,000 doors, allowing maximum flexibility for securing a growing enterprise.Each AC-225 Access Control Unit (ACU) supports two readers (In/Out) of various formats including standard Wiegand 26-bit. Installations can also have one reader per door.The AC-225 is ready for installation with a mountable & lockable metal enclosure integrated with transformer, power supply/charger, sounder and control board.Using onboard RS-232, Ethernet TCP/IP, and PSTN, multiple local or remote site door sub-networks can connect to the AS-225 Client/Server PC software running on Microsoft® Windows® 98/ME & NT/2000/XP operating systems.Main featuresUp to 30,000 users with access rights for every panel, across 2,000 modular doors in a system20000, FIFO, history event log, when offlineFull intelligent logic interconnection of inputs, outputs, readers, and more4 inputs, 4 outputs, up to 12 inputs and 8 outputs with MD-IO84 IO expansionSupervised, 4 state end-of-line inputsOnboard TCP/IP networking (AC-225IP version)Panel supports both 1 door (In/Out) and 2 door (In/Out, In/In and Out/Out) configurationsReal-time clock keeps time for up to 2 weeks without power. No batteries to replaceCable cut tamper detection function for readers and cover tamper detection for the enclosurePre-installed enclosure components: Transformer, dual power supply/charger unit for panel and lock devicesSounder unitSpace for a 7AH SLA backup batteryTamper switch
Add to CompareThe new Pure IP™ hardware family from ISONAS offers a suite of products that allow you to customise your access control solution. The Reader-Controller continues to take advantage of ISONAS' patented technology and remains an all-in-one intelligent device; eliminating the need for a panel and allowing the user to take advantage of their existing network.
Add to CompareBluetooth® Low Energy (BLE) allows customers to utilise Pure Mobile application and use their smart phone as their credential. Local mode feature allows readers to function without a connection to the network. This results in faster user response times, less network traffic and reduced host system loading. Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader. Metal back plate provides additional security, a simple two piece installation and consistent read range.
Add to CompareCost effective means for providing distributed access intelligence at every door Minimized costs when connecting a door beyond the range of a RS485 run, or where only an Ethernet connection is available, (e.g. a guard gate house that already has an Ethernet connection, where the cost of running a new RS485 cable would be prohibitive) Multiple sites with only one to two doors can connect to once centralized security system - Command Centre. Leverage an organization’s existing IT infrastructure, (e.g. powering Controller and door hardware via an organization’s Power over Ethernet (PoE+ capable switch or router) to manage security hardware
Add to CompareDesigned for use with the SALTO WRM1000 wall reader, the off-line CU2010 is a relay output door controller that can be connected to the WRM1000 wall reader. It offers a single wall reader connection and a single output control relay.
Add to CompareBluetooth® Low Energy (BLE) allows customers to utilise Pure Mobile application and use their smart phone as their credential. Local mode feature allows readers to function without a connection to the network. This results in faster user response times, less network traffic and reduced host system loading. Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader. Metal back plate provides additional security, a simple two piece installation and consistent read range.
Add to CompareBluetooth® Low Energy (BLE) allows customers to utilise Pure Mobile application and use their smart phone as their credential. Local mode feature allows readers to function without a connection to the network. This results in faster user response times, less network traffic and reduced host system loading. Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader. Metal back plate provides additional security, a simple two piece installation and consistent read range.
Add to CompareThe new Pure IP™ hardware family from ISONAS offers a suite of products that allow you to customise your access control solution. The Reader-Controller continues to take advantage of ISONAS' patented technology and remains an all-in-one intelligent device; eliminating the need for a panel and allowing the user to take advantage of their existing network.
Add to CompareDesigned for use with the SALTO WRM8001 wall reader, the off-line CU5010 is a relay output door controller that can be connected to one wall reader. It offers a single wall reader connection and a single output control relay.
Add to CompareEasy maintenance design Alarms for fence zone, battery missing, battery test failure, tamper, over-temperature, LV signal loss, conflicting sync masters, or service mode enabled Five day historic alarm retention Support for external power management options Voltage and temperature reporting Automatic software upgrades Internal temperature monitoring.
Add to CompareFour RS-485 interfaces for up to 8 card readers, network connection to the host system and Compact Flash memory (2 GB) Host data transfer encrypted Intelligent access manager for one to eight entrances LCD display for displaying information Individual electronic verification of plugs and outputs
Add to Compareaka PAC 2244. 2-door multi function controller. Works as part of a stand-alone or networked system. With support for up to 4 alarm event managers, 32 alarm inputs. No front programming panel or metal case. Can be used with PAC proximity readers, KeyPAC proximity readers, PAC magnetic stripe readers, and Wiegand readers, including hands-free readers.
Add to CompareNetworks DIGI*TRAC controller to PC (with Velocity Version 2.6 SP2 or later only) via 10/100 Ethernet (TCP/IP), RS-232 (direct connect only), or RS-485 (solo controller only). Optically isolated RS-485 and RS-232 ports. RS-485 for multidrop between SNIB2s at baud rates up to 115KBps or SNIB at 9600 Bps. Supports AES (128 bit Rijndael) encryption between host PC and Master SNIB2 and between Master SNIB2 and downstream SNIB2. Master SNIB2 supports integral XBox functionality for globalization. UL Listed. CE.
Add to CompareTDSi's extensive suite of products has been designed with integration and network capability to the forefront, with IP connectivity a standard feature across the range.Amongst the company's most recent product developments are the addition of an IP option to the proven MICROgarde range and an updated version of the access management software system, EXgarde PRO, which provides powerful integration capability.MICROgarde IPMICROgarde IP is a powerful addition to TDSi's range of controllers. Available for both one and two door controller options, this product offers all the functionality of the established MICROgarde system - with the added benefit of being able to be directly connected to a LAN or WAN.MICROgarde offers an extremely cost-effective, entry level controller, containing many of the features that would ordinarily only be found in much larger, more expensive systems. Operating with TDSi or third party readers, the system has an operational capacity of 5,000 card holders and is capable of supporting up to 400 doors - as well as controlling the automatic release of fire doors, upon an active input.Featuring distributed intelligence, MICROgarde controllers can operate as a fully integrated part of a system network, providing users with full control and event reporting - which may be customised to suit specific needs.Integration Capability with EXgarde PROEXgarde PRO is TDSi's market-leading, fully featured access management software application that delivers a wide range of functionality through a user-friendly interface.The new version, V3, offers unparalleled integration capabilities, providing users with a flexible and dynamic platform and the ability for complete building and security management.Through the use of a suite of database tools, EXgarde PRO delivers seamless integration with a wide range of proprietary and bespoke systems - such as Schools Information Management Systems, HR, Payroll, Time and Attendance, CCTV, Fire, Intruder and One-card software applications, offering the potential for considerable resource savings, in both time and cost.Powerful and versatile, EXgarde PRO is capable of controlling a single door at one site with a small number of users, right up to thousands of doors across multiple sites with thousands of users.
Add to CompareDesigned for use with the Premier iProx and Texecom Proximity Tags, the Premier External iProx Coil allows the user to disarm the alarm system externally. Can also function as a single door access controller.
Add to CompareTDSi 5002-1907 is a MICROgarde I TCP/IP networked access controller with 3A power supply. It features built in RS-232/RS-485 converter, reversible 2-wire RS-485 communication, & diagnostic LEDs. Additional I/O and TCP modules enable system integration and complete flexibility.
Add to CompareThe Symmetry multiNODE 2150 Elevator controller controls and records access for up to 64 floors. Each Symmetry multiNODE 2150 elevator controller can control one, two or four elevators cabs. The Symmetry Elevator controller is configured via client pc, allowing it to make all access decisions locally. A passenger presents a valid card at the reader and presses the button of the desired oor in the elevator cab. If the card is authorised for the selected floor, the elevator delivers the passenger to that floor.
Add to Compare