Access Controllers (668)
Dynamic screen functionality allows automatic updates of your web browser to show alarms and event information without having to hit the refresh button in your browser. Export reports for analysis or record keeping. Assign card holders different levels of access for added layer of security. Supports multiple users with different global languages simultaneously. Configure a site using 2 and/or 4-door controllers.
Add to CompareThe EB5008 is a device which, when connected to CU5000, CU50EN or CU50ENSVN door controllers, provides the option to manage multi relay switchable output systems such as elevator floor level access, multi shutter and barrier systems, machine switching etc. Up to 16 EB5008's can be connected in series to 1 door controller. Allows to manage up to 128 outputs. Each output has user access (triggering) rights controlled from the software. Compatible with all the SALTO WRM and CU5000, CU50EN or CU50ENSVN door controllers. Current requires 12V/500mA 6VA adaptor included. Number of relay each board 8 (Max. of 16 EB5008 board in series, totalling 128 relay outputs).
Add to CompareThe DSX-1044 is an independent processing, 32 input, intelligent controller designed to be a building block in the DSX hardware platform that allows expansion in a scalable manner. The DSX-1044 may be used in conjunction will all other DSX controllers as a Master or Slave in the controller network. Up to 128 inputs can be controlled from 1 enclosure for an efficient space saving package. Each DSX-1044 can independently retain all data necessary for system operation in its own RAM. It can perform Time Zone control with holiday overrides for outputs.
Add to CompareAn advanced access control hardware architecture capable of providing solutions for large enterprise applications 32-bit architecture, TCP/IP support, flash memory, large local cardholder database, and large reader and I/O module support Supports up to 64 Readers and up to 3 separate additional Micro5 enclosures via RS485 Pro-Watch handles system configuration, alarm/event monitoring and operation of the Intelligent Controller via TCP/IP In the event of a communication break the Intelligent Controller is fully capable of operating off-line, making access control decisions independently of Pro-Watch Connectivity to the host computer is accomplished via TCP/IP network connection
Add to CompareComprised of a M4000-DBB Database (daughter) Board connected to a M4000-DEC4 Door Entry Controller board Supports up to 4 card readers and multiple units can be combined in a single enclosure for centralised access control applications Provides distributed intelligence for Symmetry access control systems and ensures complete system security, resilience and reliability When integrated with Symmetry Access Control Software, delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership Designed to work with Symmetry Access Control Software v9.1 and above On board 1Gb network interface with AES encryption capability Manages up to 1,000,000 cardholders and 65,000 offline transactions Future-proof controller with Linux operating system Supports OSDP and Wiegand reader communication Works with most standard card technologies including MIFARE and DESFire Health monitoring and remote firmware updates can be done by the optional Symmetry Sentry Software
Add to CompareWith enclosure Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000
Add to CompareThe LNL-1000 Intelligent System Controller (ISC) by Lenel serves as the access control engine for a Lenel OnGuard system. The ISC provides power, performance, and flexibility for the most demanding applications. Multiple combinations of Input Control Modules, Output Control Modules, and Card Reader Interface Modules can be attached.
Add to CompareSymmetry M2150-8DBC controller supports 20,000 cardholders (expandable to 250,000) and up to 16 card readers with the addition of optional door controllers. Includes integrated RS232 port. Door input and output controllers connect using RS485.
Add to CompareAn advanced access control hardware architecture capable of providing solutions for large enterprise applications 32-bit architecture, TCP/IP support, flash memory, large local cardholder database, and large reader and I/O module support Supports up to 64 Readers and up to 3 separate additional Micro5 enclosures via RS485 Pro-Watch handles system configuration, alarm/event monitoring and operation of the Intelligent Controller via TCP/IP In the event of a communication break the Intelligent Controller is fully capable of operating off-line, making access control decisions independently of Pro-Watch Connectivity to the host computer is accomplished via TCP/IP network connection
Add to CompareThe Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi connectivity and can be configured in two user-friendly operational modes. The KT-2 can be used with the powerful EntraPass Security Management Software to provide more advanced and fully integrated access control features such as Wi-Fi connection. The addition of the built-in Wi-Fi antenna reduces installation time and costs while providing an ideal solution for projects with infrastructure designs that would traditionally require extensive cabling. Alternatively, the KT-2 builds on the KT-1 by continuing to support Standalone Mode, offering basic two-door security functions without the need to purchase or connect to a security management software.
Add to CompareThis new DSX Modem is small and DC powered. It is easily connected to a DSXLAN(M) module for redundancy. The unit has both an RS-232 and RS-485 communications port for connecting it to any DSX controller without the use of a MCI module or adapter. There is a DB9 connector for easy connection to a serial port. This modem comes with everything needed for any DSX dialup application. Onboard dipswitches set PC or Controller location for modem and control speaker
Add to CompareSingle door PoE powered edge controller is fast and easy to commission via the Device Utility App on the Android or iOS mobile phone At-the-door mounting decreases cable runs IP-based hardware with Power over Ethernet (PoE) capability eliminates additional network wiring and simplifies powering the panel Single door controller that can be networked with additional controllers via Ethernet Virtual Loop (EVL) In stand alone mode, it can control a single door or manage multiple networked controllers User-friendly access control management via the embedded interface Full Card-to-Host secured communication from smart card to Cloud App or Web browser Secure 128-bit AES encrypted bi-directional reader - panel communication (OSDP:V2) protocol 256-bit AES encrypted communication between panel and cloud app or web browser
Add to CompareiSTAR Edge G2 door controller with metal enclosure, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware
Add to CompareThe SALTO CU50EN is an on-line IP door controller that can have 1 or 2 wall readers connected and has 2 control relay outputs. Access control changes can be carried out on the SALTO software and are then actioned at the door controller in real time. It provides full on-line features via the networked Ethernet / WIFI link such as door monitoring status, remotely controlling door opening and Roll Call.
Add to CompareWith enclosure Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000
Add to CompareThis fused relay board provides 8 - FormC relay outputs fused at 1A. The module requires a constant +12V and a switched negative for activation of each relay. Connects to the open collector output number 2s of the 1042/44 and mounts in the expansion slot of the 1040E enclosure.
Add to CompareThe PW-Series family of access control modules are controlled by and connected to the intelligent control module. The access modules have been designed to allow for a modular customizable solution. The PW5K1R1 provides I/O support for a single card access reader.
Add to CompareThe EN-1DBC is a single door edge-network intelligent controller with built in database and network interface card. The controller supports power over Ethernet (PoE) and provides the distributed intelligence for the access control system. The memory capacity of the M2150 DBU is 50,000 card-holders. The EN-1DBC is designed to be installed close to the door and is supplied in a small polycarbonate enclosure. Optionally it can be installed in a range of steel enclosures.
Add to CompareThe KT-100 firmware program is stored in flash memory for easy upload from the owrkstation without changing memory chips. Using a TCP/IP interface module, the KT-100 can be connected to a LAN/WAN network. Mounts on the secure side of a door, reducing the length of cable requred. Includes connections for 2 card readers, lock device, door contact and request to exit. Can be easily mounted on a single gang box (flush mount) or on a surface back box.
Add to CompareThe LNL-2000 Intelligent System Controller (ISC) from Lenel is designed for advanced access control applications. As the access control engine for the OnGuard system, the ISC provides power and functionality. The ISC can communicate to the host computer in a single- or dual-path configuration of Ethernet, dial-up or direct connect communication. Multiple combination of Input Control Modules, Output Control Modules, Biometric Gateways, and Card Reader Interface Modules (up to 64 devices) can be configured.
Add to CompareSupports 8 readers in metal enclosure Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory
Add to CompareKantech, part of the Security Products business unit of Tyco, the world’s largest pure-play fire protection and security company, announces the release of KT-1, an intuitive single door IP controller, with a unique one touch set-up that brings true security simplification to the industry. Featuring an attractive and space saving design, the unique form factor of the KT-1 controller can be installed in a variety of locations, from typical door installations in plain view to a traditional security cabinet. “The KT-1 single door controller was designed with installers in mind. All that is needed is an IP connection, and the push of a unique touch-sensitive button to be up and running in minutes,” said Rafael Schrijvers, Product Marketing Manager, Access Control, EMEA for Tyco Security Products. “This elegantly designed hardware combined with user friendly EntraPass software provides the ultimate experience in access control installation — an intuitive user interface and the flexibility and ease of IP and PoE + for single door installations.” With its innovative single button enrolment, KT-1 is automatically detected and enrolled on the security management software. There is no need to manually enter MAC/Serial numbers, making it quick and simply to install. To further streamline the installation process, a single KT-1 controller can also act as a head IP controller’ for more than 30 additional controllers when communicating with the EntraPass software. Installers simply push the touch-sensitive button and it automatically talks to the gateway KT-1 controller, thereby reducing the amount of IP connections needed and substantially reducing security set up time. This one touch set-up, combined with its on-board Ethernet port, Power over Ethernet capabilities and flexible design — featuring interchangeable connections for easy installation or replacement — means the KT-1 controller is extremely simple to install for both security installers and IT specialists. KT-1 also seamlessly integrates with DSC intrusion alarm panels via direct panel to panel integration. When using the EntraPass software, KT-1 can also be integrated with American Dynamics and Exacq video management systems. The KT-1 controller is an ideal complement to the EntraPass security management software (v6.02 and higher), including the EntraPass Web application and the EntraPass Go mobile app, creating a highly scalable solution that installs quickly and provides a superior user experience.
Add to ComparePowerful 8 or 16 reader network-ready controller Expanded memory for up to 500,000 cardholders Global and local anti-passback with occupancy control Embedded intrusion zone functionality Retrofits possible with apC adapter plate Onboard battery backup and storage of configuration data using nonvolatile memory Supports both direct readers and RS-485 readers for greater coverage LCD provides important controller status and diagnostics information Supports multiple cards per cardholder and multiple formats for a highly secure, flexible solution Great solution for Universities, Healthcare, and Transportation applications Compatible with C•CURE 9000 and C•CURE 800/8000
Add to CompareThe PW6101 series intelligent controller and reader module is a high performance, Ethernet ready, cost effective system capable of controlling a single opening. It is an ideal IP PoE solution for new construction and other facilities that are infrastructure-ready.
Add to CompareWith enclosure Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000
Add to CompareWith the SALTO Control Unit Adaptor, it's possible to integrate with third party devices such as time and attendance systems. The Control Unit Adaptor is designed to allow users to update their cards at the reading point that they use on a daily basis, for instance a Time and Attendance terminal. This means you can now access a door with all the convenience of SALTO and control your staff attendance at the same time. The CU Adaptor is connected on one side to any SALTO door controller, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.
Add to CompareSupports 8 readers in plastic enclosure Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory
Add to CompareMotherboard with PoE module Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000
Add to CompareThe Edge Network Controller supports two doors and provides four general purpose inputs and two general purpose outputs. It can be powered by either a local power supply or Power over Ethernet (PoE+). The Symmetry 2 door Edge network door controller is a security appliance for access control system providing distributed intelligence, resilience and fast response to access requests.
Add to Compare