Access Controllers  (704)

Driven by Rosslare's powerful, flexible and easy to use software, the system provides an ideal, modular and expandable solution for commercial and institutional needs.  It provides seamless integration with Rosslare's range of RFID Proximity, PIN, Prox+PIN, Smartcard, and biometric readers with Rosslare's selection of RFID credentials.

CEM DCM/300/101 is an intelligent two door controller that also includes enclosure, board & power supply/ battery charger. Using a powerful 32bit processor, it gives full off-line validation and decision making capability at the point of entry, when host communication is not available.

The APN-35 is a standalone two door controller used for connection of two Wiegand type card readers and all the necessary input and outputs associated with two access controlled doors. The APN-35 can also be used for a single door operation with entry/exit readers and anti passback. The APN-35 supports standard proximity and other readers with Wiegand interfaces such as bar code, smart card, biometric, keypad, etc. The APN-35 also supports Magnetic stripe readers utilizing ABA Track 2 encoding. 

Requires 8MB RAM. 256 access levels / 127 time zones. Supports up to 32 alarm panels (512 inputs) and 32 relay outputs. 2 card access. Timed and zone anti-passback. Wide range of reader types supported. Direct interface to various LANs.

The AAN-4 is a complete 4-door controller with downloadable database and RS-232/RS-485 or TCP/IP communication. The AAN-4 supports all major reader technology (proximity, biometrics, bar code, infrared, long range infrared) with the capability of having different type readers at each port and up to 8 different facility or site codes.The AAN-4 provides each reader with 2 auxiliary outputs, which can be mapped via the software to perform time or event activated functions. Surface mount.

2 readers.  1 supervised door input, 1-door relay, 1-alarm relay, MB2, serial printer harness (DLPH), card reader harness (MCRH) and 800-event buffer.  Built-in MATCH function.  Power supply not included.  Accessories include: DLPH - DigiLock Printer Harness and DLPT - DigiLock Power Transformer.

Easy maintenance design Alarms for fence zone, battery missing, battery test failure, tamper, over-temperature, LV signal loss, conflicting sync masters, or service mode enabled Five day historic alarm retention Support for external power management options Voltage and temperature reporting Automatic software upgrades Internal temperature monitoring. 

The Premier iProx can be connected to the Premier Series control panels and provides support for Texecom Proximity Tags.Standard 26 bit wiegand readers can also be interfaced allowing alternative tags or cards to be used with Premier control panels. Can also be used in a stand-alone mode whereby tags can be learnt and stored locally, thus allowing the unit to be used as a single door access controller.

AMAG multiNODE M2150 range of controllers provides distributed intelligence for access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership. In addition, AMAG M2150-AC24/4 provides a resilient and fault tolerant access control solution that will continue to operate in the unlikely event of database server or network infrastructure failure

Ricochet MT2 capability is now included in Premier Elite control panels (V2.00 and higher) and Premier Elite XP-W expanders (V2.00 and higher). Premier Elite control panels can accept multiple Ricochet MT2 capable wireless expanders increasing the wireless device capacity on every panel. With Ricochet MT2 and Premier Elite control panels the keyfobs are now assigned to users and no longer take up device slots on wireless expanders. This dramatically increases the number of wireless keyfobs available on each system.

Compatible with the RDR IP card reader. 

Standalone, 8, 4, 150, 12 V DC, 445 x 612 x 89

aka PAC 2224. 2-door multi function controller. Works as part of a stand-alone or networked system. With support for up to 4 alarm event managers, 32 alarm inputs. No front programming panel or metal case. Can be used with PAC proximity readers, KeyPAC proximity readers, PAC magnetic stripe readers, and Wiegand readers, including hands-free readers.

TDSi is pleased to add a new model to its MICROgarde controller range, offering integrated IP and PSU. The MICROgarde entry level range of networkable access control products give many of the benefits of a bigger system, without the need for a big budget. For organisations exploring the world of access control for the first time, MICROgarde offers easy installation, reduced cost of ownership and highly competitive pricing to offer the best value and most practical access control system available. The addition of this latest model means MICROgarde I and MICROgarde II can be purchased with IP, Power Supply or both, offering customers greater choice. MICROgarde also delivers unrivalled flexibility of system design. Available in one or two door versions, TDSi has designed the product to cater for the diverse range of needs and situations that may arise. All controllers feature distributed intelligence (with a battery backup), meaning the controller operates and makes decisions even when communication to the host PC is lost. Should this happen, events are stored within the controller until communication is restored and this is uploaded with no loss of data. MICROgarde also offers a further money saving and practical advantage by its ability to be integrated with other TDSi or third-party systems such as CCTV, biometrics and photo ID cards - to make the most of other building services investments. TDSi has also designed MICROgarde to make the life of installers easier, with a number of useful features to significantly reduce the effort and time required for installation and/or integration. To find out more about the benefits of installing and using TDSi's MICROgarde controllers please visit: www.tdsi.co.uk/microgarde or contact us on 01202 723535.  

It features supervised inputs and relays making it suitable for monitoring and signalling alarm conditions or for integration with intruder alarm and building management systems.  Maximum of 2 using the majority of reader, keypad and biometric technologies including TDSi Microcard, eXprox, Optica® and those with standard clock & data, Wiegand and HID standard 37-bit (H10302) output formats.

TDSi 5002-3092 is an  EXcel4 4 door access control unit which features standby battery facility, integral tamper switch, integral TCP/IP port & anti-passback control.

TDSi MICROgarde® I - IP is a networkable access controller with stand alone power supply, 2-wire RS-485 communication, and diagnostic LEDs and custom reporting and automated back up.

AC-525 is a highly advanced networked control panel that offers unified access control and digital video MPEG-4 web server components.The fully featured access control component manages 30,000 users across two doors (expandable up to 4 doors).  The digital video server component supports 2 analogue cameras with PTZ, audio record web server and a USB based local DVR.  This cost effective 2-systems-in-1 package cuts down integration costs and is easy to configure and operate.Main featuresCompact full featured integration with complete two-door physical access control interface including two channels of digital multimedia.  Install less hardware units, which are dedicated to both fields.Compatible with a wide range of analogue cameras, microphones and speakers for video and Voice over IP.Supports ISO standard MPEG-4 & Intel IPP video streaming.  For connecting to remote NVR hardware or software.Supports both USB and Edge DVR.Embedded Linux OS based web server lets you access the web-server with IE browserOn-board 3Amp power supply with battery charger for 7Ah SLA backup battery.Options for Edge data storageOn-board pre-alarm and post event timers and custom recording preferences.On-board USB 2.0 connection for additional USB 2.0 compliant memory key or Hard Disk Edge DVR (memory only limited to capacity of storage device).

TDSi EXpert 2 IP 2 door controller is supplied with full TCP/IP connectivity as well as a power supply and RS-485 connectivity. Housed in a robust metal enclosure, it also has space available for optional Expander slave or I/O boards.

Networkable, Networkable, SSL, TCP/IP, DHCP, ARP, ICMP, SSH, IPv4, IPv6, 16 inputs / 8 relay outputs, 12 W, 303 x 204 x 61, 2500, 0 ~ 40, 0 ~ 95

It features supervised inputs and relays making it suitable for monitoring and signalling alarm conditions or for integration with intruder alarm and building management systems.  It also has an in-built TCP/IP port to allow connection to modern IT networks, simplifying installation and commissioning.

TDSi has launched a re-designed power supply unit for its EX series of access control units.The new unit incorporates a range of key design and performance enhancements, resulting in significant improvements to the ease, speed, and therefore the cost of installation.Key features of the new system include:Low profile case - new design makes the installation less obtrusiveFully accessible mains input connections - allows the incoming supply to be connected without the need to dismantle any part of the caseHigh-quality 3 A output - minimises noise and maximises reliabilityFused distribution of power - provides individual fused supplies for both the access control unit and the associated locksKnock-outs for interfacing to trunking and conduit - provides multiple installation optionMultiple rear cable entry optionsSimple cable screen termination clamps - provides reliable connection of the cable screensSpace for standby battery with charging facility - provides un-interrupted operation in the event of power failureLEDs to indicate power supply or fuse failure - provides diagnostic aid in the event of a system problem TDSi's range of EX-series units continues to provide users with the widest choice to meet their access control needs, as well as the ability to support future expansion of the system, if required.  The company's EXpert range also provides for more advanced hardware integration - such as lift control and alarm point monitoring.

TDSi 5002-3082 is an EXcel2 2 door access control unit with standby battery facility, allowing the system to continue to operate in the event of power failure. It continues to operate and store events even with the loss of communications, ensuring disruption free operation.

MICROgarde is TDSi's entry-level range of networkable products, providing cost effective solutions that deliver many of the benefits of much larger systems.The MICROgarde controller features distributed intelligence and operates as part of a system network, providing users with full control and event reporting.  The key features of this highly effective, proven controller are:Available in 1 or 2 door versions, offering great flexibility in system designThe controller operates with TDSi or third party readers and has an operational capacity of 5,000 card holdersThe software features an automatic fire door release, upon an active inputLock times may be varied to suit individual needs, ensuring compliance with the Disability Discrimination Act (DDA)TCP/ IP module options enable the controller to be connected directly to an IT networkOptional input/ output modules allow other devices and systems to be controlled and monitored - for example, intruder alarmsSupplied in a robust ABS housingThanks to its intuitive PC software, MICROgarde is easy to install and maintain, without the need for training - and is capable of supporting up to 200 controllersUsers may customise event reports - which can include search and sort criteria for easy auditingBackup of the system is fully automatedMICROgarde is available as a complete starter kit - including controller, PC cable, PC software, cards and reader

PCSC IQ400 is a multi-configurable four door access controller. It can be expanded in 4 reader increments, up to 10 or 12 readers. It has a modular upgrades with add-on readers, inputs and outputs are engineered into the IQ Series design enabling you to dynamically configure a custom security system with standard off the shelf components. It provide user applications for simple to high security environments.

RS485 connection to the AMC2 4W controller 4 Wiegand reader interfaces Possible to double the number of readers on an AMC2 4W from 4 to 8 8 analogue inputs 8 relay outputs (wet or dry) Status of inputs and outputs shows on AMC2 4W LCD display Transfer rate to EXT interface (RS485): 9,6 kBit/sects

Easy maintenance design Alarms for fence zone, battery missing, battery test failure, tamper, over-temperature, LV signal loss, conflicting sync masters, or service mode enabled Five day historic alarm retention Support for external power management options Voltage and temperature reporting Automatic software upgrades Internal temperature monitoring. 

aka PAC 2204. 4 door alarm controller. 2 Alarm Event Managers (16 alarm inputs - expandable to 32 inputs, 24 outputs - expandable to 40 outputs) in metal case.

Fully expandable - up to 7 eXpert2 slaves per master giving control of up to 16 doors.  Compatible with eXguard PRO PC software.

4 door controller for Aritech ACI reader applications. Optional power supply. Built-in communication with PC, modem or hand-held programmer. Built-in memory with battery backup.

Two Wiegand interfaces for up to 2 card readers, network connection to the host system and Compact Flash memory (2 GB) Host data transfer encrypted Intelligent access manager for one to eight entrances LCD display for displaying information Individual electronic verification of plugs and outputs

Networkable, 4, 36,000, Networkable, RS-232, RS-485, Ethernet (TCP/IP), Universal / Wiegand Reader Interface, 100 ~ 240 V AC, 390 x 410 x 90, 7,500, -5 ~ +45, 0 ~ 95

aka PAC 2222. 2 door multi function controller. With support for up to 2 alarm event managers, 16 alarm inputs. No front programming panel or metal case. It can be used with PAC proximity readers, KeyPAC proximity readers, PAC magnetic stripe readers, Wiegand readers, and hands-free readers.

Networkable, 2, 50,000, Offline Capabilities, Networkable, RS485, 10/100 Ethernet, 4 in, 4 out, 11 ~ 15 V DC, 180 x 120 x 20, 100, -10 ~ +55

IEC-IB1 is a 2 door interlock controller that prevents both door opening at the same time.

AMAG SR-DC2 is a flexible 2-door controller that can be used with a variety of reader types. It provides all necessary I/O for a complete solution for 2, 4, 6, or 8 controlled doors per cabinet. For retrofit applications with F/2F(1) readers and devices already installed, the SR-DC8 provides a plugand-play upgrade path to a Symmetry solution

2 door boxed controller. (pre-wired in a metal case without cutout/ 3.0 Amp PSU). For use with Easi readers only.

The Controller 6000 High Spec - PIV is securely and periodically updated by the Gallagher Command Centre Server with full details of PIV cardholder certificates and their revocation status. In conjunction with Gallagher T Series PIV readers, the Controller 6000 is responsible for performing all contactless PIV smart card authentication checks, enforcing the revocation status of PIV smart card certificates, and performing cardholder specific access control decisions without the need for constant server connectivity. When coupled with 8H or 4H Modules, the Controller 6000 High Spec - PIV provides I/O connectivity for either eight access controlled doors and associated Gallagher readers, or up to 10 doors with additional distributed I/O. Delivers all the benefits of the standard Controller 6000 High Spec unit for access control decision making, while supporting PIV card authentication natively. Storage of up to 136,000 cardholders and 80,000 events. Support for up to 10 access controlled doors. Options to support daisy-chain wiring via two onboard RS-485 ports, or home-run wiring via optional 4H/8H Modules (4 and 8 RS-485 ports respectively). Can be mounted in the Gallagher Cabinet, Gallagher Dual Cabinets, or on the Gallagher Mounting Plate. Cabinets and Mounting Plates are supplied separately. 

Now available from TDSi, SOLOgarde is a dedicated stand-alone door controller.  Providing a high-quality, cost-effective access control solution for a wide range of applications, SOLOgarde is fast and easy to install and to program. Capable of supporting up to 1,000 users, SOLOgarde utilises the highly secure MIFARE® smartcard technology, enabling users to carry and use just a single card for multiple applications.The SOLOgarde controller provides a great deal of flexibility.  For example, the ‘toggle mode' feature allows the system to be used to set or unset an intruder alarm for specific users.  The same functionality may be used to allow specified cardholders to unlock and then lock specific rooms for a period of time, simply by presenting their card to the reader at the start and end of the period. The unit has been developed with the needs of disabled users in mind; a DDA user group automatically applies an extended lock time for card-holders assigned to that preset group. SOLOgarde features an innovative hand-held programmer.  Easy to use, the programmer completely eliminates the need to manage and control shadow cards, allowing not only the easy and clear management of all user cards, but also enabling more advanced functionality - including controller settings and diagnostic features. A second reader may also be connected to the SOLOgarde controller providing true read-in/read-out capability.Installation is quick and straightforward.  SOLOgarde requires just a standard electrical back box - there is no need for a special enclosure and the spring-loaded terminals mean that no special fitting tools are required.

An Indoor PIN+Prox Mullion 3x4 Controller - US Gang box.  3 security levels and 3 user levels.  4-wire terminal block interface.  Programming performed locally using 2 Tri-Color LED menu.