Access Controllers  (776)

TDSi 5002-3082 is an EXcel2 2 door access control unit with standby battery facility, allowing the system to continue to operate in the event of power failure. It continues to operate and store events even with the loss of communications, ensuring disruption free operation.

Networkable, Networkable, SSL, TCP/IP, DHCP, ARP, ICMP, SSH, IPv4, IPv6, 16 inputs / 8 relay outputs, 12 W, 303 x 204 x 61, 2500, 0 ~ 40, 0 ~ 95

The AAN-4 is a complete 4-door controller with downloadable database and RS-232/RS-485 or TCP/IP communication. The AAN-4 supports all major reader technology (proximity, biometrics, bar code, infrared, long range infrared) with the capability of having different type readers at each port and up to 8 different facility or site codes.The AAN-4 provides each reader with 2 auxiliary outputs, which can be mapped via the software to perform time or event activated functions. Surface mount.

It features supervised inputs and relays making it suitable for monitoring and signalling alarm conditions or for integration with intruder alarm and building management systems.  Maximum of 2 using the majority of reader, keypad and biometric technologies including TDSi Microcard, eXprox, Optica® and those with standard clock & data, Wiegand and HID standard 37-bit (H10302) output formats.

CEM DCM/300/101 is an intelligent two door controller that also includes enclosure, board & power supply/ battery charger. Using a powerful 32bit processor, it gives full off-line validation and decision making capability at the point of entry, when host communication is not available.

TDSi has launched a re-designed power supply unit for its EX series of access control units.The new unit incorporates a range of key design and performance enhancements, resulting in significant improvements to the ease, speed, and therefore the cost of installation.Key features of the new system include:Low profile case - new design makes the installation less obtrusiveFully accessible mains input connections - allows the incoming supply to be connected without the need to dismantle any part of the caseHigh-quality 3 A output - minimises noise and maximises reliabilityFused distribution of power - provides individual fused supplies for both the access control unit and the associated locksKnock-outs for interfacing to trunking and conduit - provides multiple installation optionMultiple rear cable entry optionsSimple cable screen termination clamps - provides reliable connection of the cable screensSpace for standby battery with charging facility - provides un-interrupted operation in the event of power failureLEDs to indicate power supply or fuse failure - provides diagnostic aid in the event of a system problem TDSi's range of EX-series units continues to provide users with the widest choice to meet their access control needs, as well as the ability to support future expansion of the system, if required.  The company's EXpert range also provides for more advanced hardware integration - such as lift control and alarm point monitoring.

With its AMC2 Access Modular Controller, Bosch Security Systems presents a common and very flexible technology platform for access control solutions of any size. It can be used in small and midsized installations based on Bosch's Access Professional Edition as well as in large deployments managed by the Access Engine as part of the Building Integration System (BIS). The AMC2 supports very flexible designs, allowing to mix and match Wiegand and serial controllers as needed. One device can control up to eight access points, and virtually any number of controllers can be connected to the management console using any combination of Ethernet and/or RS485 communication. A broad offering of expansion boards adds even more flexibility as it allows to increase the number of inputs and outputs and even to implement additional Wiegand reader ports. Using a three layer architecture with intelligence of every level, AMC2 based access solutions offer a very high degree of reliability and stability. The controller stores all necessary information locally in a battery-buffered memory and a compact flash card. This enables it to carry out independent authorization checks on access points, take access decisions, control closing/opening elements and register movement events even when offline. Once online again, it will transfer all data to the superordinated access control system. In addition, the AMC2 adds another level of supervision through its integrated LCD screen, displaying important status information. While supporting a broad range of applications today, the AMC2 is also designed to adapt to future requirements and technologies. Every piece of software within the controller can be modified via a remote software connection, enabling an easy upgrade to newer versions.

Easy maintenance design Alarms for fence zone, battery missing, battery test failure, tamper, over-temperature, LV signal loss, conflicting sync masters, or service mode enabled Five day historic alarm retention Support for external power management options Voltage and temperature reporting Automatic software upgrades Internal temperature monitoring. 

AC-525 is a highly advanced networked control panel that offers unified access control and digital video MPEG-4 web server components.The fully featured access control component manages 30,000 users across two doors (expandable up to 4 doors).  The digital video server component supports 2 analogue cameras with PTZ, audio record web server and a USB based local DVR.  This cost effective 2-systems-in-1 package cuts down integration costs and is easy to configure and operate.Main featuresCompact full featured integration with complete two-door physical access control interface including two channels of digital multimedia.  Install less hardware units, which are dedicated to both fields.Compatible with a wide range of analogue cameras, microphones and speakers for video and Voice over IP.Supports ISO standard MPEG-4 & Intel IPP video streaming.  For connecting to remote NVR hardware or software.Supports both USB and Edge DVR.Embedded Linux OS based web server lets you access the web-server with IE browserOn-board 3Amp power supply with battery charger for 7Ah SLA backup battery.Options for Edge data storageOn-board pre-alarm and post event timers and custom recording preferences.On-board USB 2.0 connection for additional USB 2.0 compliant memory key or Hard Disk Edge DVR (memory only limited to capacity of storage device).

Cost effective means for providing distributed access intelligence at every door Minimized costs when connecting a door beyond the range of a RS485 run, or where only an Ethernet connection is available, (e.g. a guard gate house that already has an Ethernet connection, where the cost of running a new RS485 cable would be prohibitive) Multiple sites with only one to two doors can connect to once centralized security system - Command Centre. Leverage an organization’s existing IT infrastructure, (e.g. powering Controller and door hardware via an organization’s Power over Ethernet (PoE+ capable switch or router) to manage security hardware

It features supervised inputs and relays making it suitable for monitoring and signalling alarm conditions or for integration with intruder alarm and building management systems.  It also has an in-built TCP/IP port to allow connection to modern IT networks, simplifying installation and commissioning.

aka PAC 2204. 4 door alarm controller. 2 Alarm Event Managers (16 alarm inputs - expandable to 32 inputs, 24 outputs - expandable to 40 outputs) in metal case.

TDSi MICROgarde® I - IP is a networkable access controller with stand alone power supply, 2-wire RS-485 communication, and diagnostic LEDs and custom reporting and automated back up.

M2150 2DBC controller supports 20,000 cardholders (expandable to 250,000) and up to 16 card readers with the addition of optional door controllers. Includes integrated RS232 port. Door input and output controllers connect using RS485.

TDSi EXpert 2 IP 2 door controller is supplied with full TCP/IP connectivity as well as a power supply and RS-485 connectivity. Housed in a robust metal enclosure, it also has space available for optional Expander slave or I/O boards.

Driven by Rosslare's powerful, flexible and easy to use software, the system provides an ideal, modular and expandable solution for commercial and institutional needs.  It provides seamless integration with Rosslare's range of RFID Proximity, PIN, Prox+PIN, Smartcard, and biometric readers with Rosslare's selection of RFID credentials.

Networkable, 4, 36,000, Networkable, RS-232, RS-485, Ethernet (TCP/IP), Universal / Wiegand Reader Interface, 100 ~ 240 V AC, 390 x 410 x 90, 7,500, -5 ~ +45, 0 ~ 95

Fully expandable - up to 7 eXpert2 slaves per master giving control of up to 16 doors.  Compatible with eXguard PRO PC software.

TDSi 5002-3092 is an  EXcel4 4 door access control unit which features standby battery facility, integral tamper switch, integral TCP/IP port & anti-passback control.

MICROgarde is TDSi's entry-level range of networkable products, providing cost effective solutions that deliver many of the benefits of much larger systems.The MICROgarde controller features distributed intelligence and operates as part of a system network, providing users with full control and event reporting.  The key features of this highly effective, proven controller are:Available in 1 or 2 door versions, offering great flexibility in system designThe controller operates with TDSi or third party readers and has an operational capacity of 5,000 card holdersThe software features an automatic fire door release, upon an active inputLock times may be varied to suit individual needs, ensuring compliance with the Disability Discrimination Act (DDA)TCP/ IP module options enable the controller to be connected directly to an IT networkOptional input/ output modules allow other devices and systems to be controlled and monitored - for example, intruder alarmsSupplied in a robust ABS housingThanks to its intuitive PC software, MICROgarde is easy to install and maintain, without the need for training - and is capable of supporting up to 200 controllersUsers may customise event reports - which can include search and sort criteria for easy auditingBackup of the system is fully automatedMICROgarde is available as a complete starter kit - including controller, PC cable, PC software, cards and reader

AC-225 is suitable for applications with up to 30,000 users across a modular 2,000 doors, allowing maximum flexibility for securing a growing enterprise.Each AC-225 Access Control Unit (ACU) supports two readers (In/Out) of various formats including standard Wiegand 26-bit.  Installations can also have one reader per door.The AC-225 is ready for installation with a mountable & lockable metal enclosure integrated with transformer, power supply/charger, sounder and control board.Using onboard RS-232, Ethernet TCP/IP, and PSTN, multiple local or remote site door sub-networks can connect to the AS-225 Client/Server PC software running on Microsoft® Windows® 98/ME & NT/2000/XP operating systems.Main featuresUp to 30,000 users with access rights for every panel, across 2,000 modular doors in a system20000, FIFO, history event log, when offlineFull intelligent logic interconnection of inputs, outputs, readers, and more4 inputs, 4 outputs, up to 12 inputs and 8 outputs with MD-IO84 IO expansionSupervised, 4 state end-of-line inputsOnboard TCP/IP networking (AC-225IP version)Panel supports both 1 door (In/Out) and 2 door (In/Out, In/In and Out/Out) configurationsReal-time clock keeps time for up to 2 weeks without power.  No batteries to replaceCable cut tamper detection function for readers and cover tamper detection for the enclosurePre-installed enclosure components:  Transformer, dual power supply/charger unit for panel and lock devicesSounder unitSpace for a 7AH SLA backup batteryTamper switch

aka PAC 2222. 2 door multi function controller. With support for up to 2 alarm event managers, 16 alarm inputs. No front programming panel or metal case. It can be used with PAC proximity readers, KeyPAC proximity readers, PAC magnetic stripe readers, Wiegand readers, and hands-free readers.

Networkable, 2, 50,000, Offline Capabilities, Networkable, RS485, 10/100 Ethernet, 4 in, 4 out, 11 ~ 15 V DC, 180 x 120 x 20, 100, -10 ~ +55

The Controller 6000 High Spec - PIV is securely and periodically updated by the Gallagher Command Centre Server with full details of PIV cardholder certificates and their revocation status. In conjunction with Gallagher T Series PIV readers, the Controller 6000 is responsible for performing all contactless PIV smart card authentication checks, enforcing the revocation status of PIV smart card certificates, and performing cardholder specific access control decisions without the need for constant server connectivity. When coupled with 8H or 4H Modules, the Controller 6000 High Spec - PIV provides I/O connectivity for either eight access controlled doors and associated Gallagher readers, or up to 10 doors with additional distributed I/O. Delivers all the benefits of the standard Controller 6000 High Spec unit for access control decision making, while supporting PIV card authentication natively. Storage of up to 136,000 cardholders and 80,000 events. Support for up to 10 access controlled doors. Options to support daisy-chain wiring via two onboard RS-485 ports, or home-run wiring via optional 4H/8H Modules (4 and 8 RS-485 ports respectively). Can be mounted in the Gallagher Cabinet, Gallagher Dual Cabinets, or on the Gallagher Mounting Plate. Cabinets and Mounting Plates are supplied separately. 

IEC-IB1 is a 2 door interlock controller that prevents both door opening at the same time.

Now available from TDSi, SOLOgarde is a dedicated stand-alone door controller.  Providing a high-quality, cost-effective access control solution for a wide range of applications, SOLOgarde is fast and easy to install and to program. Capable of supporting up to 1,000 users, SOLOgarde utilises the highly secure MIFARE® smartcard technology, enabling users to carry and use just a single card for multiple applications.The SOLOgarde controller provides a great deal of flexibility.  For example, the ‘toggle mode' feature allows the system to be used to set or unset an intruder alarm for specific users.  The same functionality may be used to allow specified cardholders to unlock and then lock specific rooms for a period of time, simply by presenting their card to the reader at the start and end of the period. The unit has been developed with the needs of disabled users in mind; a DDA user group automatically applies an extended lock time for card-holders assigned to that preset group. SOLOgarde features an innovative hand-held programmer.  Easy to use, the programmer completely eliminates the need to manage and control shadow cards, allowing not only the easy and clear management of all user cards, but also enabling more advanced functionality - including controller settings and diagnostic features. A second reader may also be connected to the SOLOgarde controller providing true read-in/read-out capability.Installation is quick and straightforward.  SOLOgarde requires just a standard electrical back box - there is no need for a special enclosure and the spring-loaded terminals mean that no special fitting tools are required.

2 door boxed controller. (pre-wired in a metal case without cutout/ 3.0 Amp PSU). For use with Easi readers only.

4 door controller for Aritech ACI reader applications. Optional power supply. Built-in communication with PC, modem or hand-held programmer. Built-in memory with battery backup.

Keyscan door control units are built for longevity, durability and reliability. Engineered by Keyscan, all 1, 2, 4, and 8 door control units are designed for fast and efficient performance with standard features like dual on-board processors and heavy duty relays.

Incorporating the same features as the door control units, Keyscan elevator control units offer 2 cabs, up to 16 floors*, elevator control model.

PCSC IQ400 is a multi-configurable four door access controller. It can be expanded in 4 reader increments, up to 10 or 12 readers. It has a modular upgrades with add-on readers, inputs and outputs are engineered into the IQ Series design enabling you to dynamically configure a custom security system with standard off the shelf components. It provide user applications for simple to high security environments.

AMAG multiNODE M2150 range of controllers provides distributed intelligence for access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

TDSi MICROgarde® I with PSU is a networkable access controller with integral power supply, 2-wire RS-485 communication, and diagnostic LEDs and custom reporting and automated back up.

CEM DCM/300/006 is an intelligent two door board only controller designed to interface third-party read heads with the CEM range of access control systems. It has an on-board 10/100 Ethernet connection and communicates directly with the AC2000 central system. Using a powerful 32bit processor, it gives full off-line validation and decision making capability at the point of entry, when host communication is not available.

TDSi 5002-1815 is a MICROgarde II Starter Kit which includes 1 MICROgarde II controller, 2 EXprox proximity readers, 1 RS-232 cable, 10 proximity cards, 1 CD-ROM containing PC software & fixing kits. It is easy to install & maintain.

The innovative CA150 represents the latest addition to the company's already flexible line up of 2, 4 and 8 reader access control units and elevator floor access control units.

TDSi 5002-1825 is a MICROgarde II Starter Kit which includes 1 MICROgarde II controller, 2 EXprox proximity readers, 1 RS-232 cable, 10 proximity cards, 1 CD-ROM containing PC software & fixing kits. It is cost effective networked access control unit giving the advantages of central control and event reporting.

Keyscan door control units are built for longevity, durability and reliability. Engineered by Keyscan, all 1, 2, 4, and 8 door control units are designed for fast and efficient performance with standard features like dual on-board processors and heavy duty relays.

Standalone, 2, 4, 150, 12 V DC, 445 x 612 x 89

TDSi 5002-1910 is a MICROgarde I Starter Kit which includes -  1 MICROgarde I controller, 1 EXprox proximity reader, 1 RS-232 cable, 10 proximity cards, 1 CD-ROM containing PC software & fixing kits. Its a cost effective networked access control unit giving the advantages of central control and event reporting.