Access Controllers  (668)

The distributed elevator controller has 8 DIP switches and 16 relay output terminals. It can communicate with the master elevator controller and the relay via RS-485.

An multi-functional access controller with a TCP/IP wired network interface Applicable to industrial parks, office buildings, financial buildings, schools, factories, CBD, residential areas, governments, and more TCP/IP communication Two communication protocols: RS-485 and Wiegand (W26 and W34) Holds 100,000 user and stores 500,000 card-swiping records Supports interlock, group combination, anti-passback, remote unlock, and more Supports card reader tamper alarm, intrusion alarm, door sensor, timeout alarm, duress alarm, illegal card exceeding threshold alarm, and incorrect password alarm Supports built-in RTC, manual time synchronisation, and automatic time synchronisation Support power-off memory protection and online upgrade Support PoE power supply Supports watchdog (a device that protects a system from software or hardware failures)

Attractive peripheral for the AP7803 Designed for many different integrations Provides 12 secured inputs and 6 outputs

Networkable, 300,000, RS485, 232, TCP/IP, 4 in, 228.6 x 139.7 x 25.4, 0 ~ 70, 0 ~ 95

Access Control Technology (ACT) Ltd. has launched a new access control solution that has been designed to suit all types of SME’s located in a single building and not requiring more than 32 protected doors. The ACTpro 1500 single door IP controller can be set-up and administered via its built-in web server or through the established ACTWin software application. Key features include voltage monitoring, break glass monitoring, status LEDs for fault indication and cable management improvements such as a raised PCB and more space in the enclosure. It is expandable to up to 32 doors via ACTpro door stations and supports 15,000 users. For sites with only one ACTpro 1500 the built-in web server is ideal for setting up and administrating the access control system. The web server reduces the potential for IT issues e.g. getting access to a PC, passwords, etc when installing applications. The simplicity of the web interface decreases the time spent on configuring and administering the system and on training the end user. The ACTpro 1500 system can be accessed, via a web browser, from any PC on the LAN The new ACTpro reader range combines ACT reliability with a modern and elegant design that will fit into any environment. These multi-format RFID readers are available as pin, pin & proximity or proximity only options. Suitable for both indoors or outdoors they have mullion, surface or flush mount options. Download ACTpro 1500 Access Control Solution Brochure

DS-K2M060 Secure Door Control Unit is the interlayer between the access control terminal and the lock, including the door magnetic, the lock, the exit button and so on. It can be applied to keep the door closed when the door is damaged.

An multi-functional access controller with a TCP/IP wired network interface Applicable to industrial parks, office buildings, financial buildings, schools, factories, CBD, residential areas, governments, and more TCP/IP communication Two communication protocols: RS-485 and Wiegand Supports storing 100,000 user and 500,000 card-swiping records Supports multi-door interlock, multi-user unlock, anti-passback, and remote unlock Supports reader tamper alarm, intrusion alarm, unlocking timeout alarm, duress alarm, invalid card exceeding threshold alarm, and incorrect password alarm Supports built-in RTC, manual time fixing, and automatic time fixing Data can be saved permanently in case of power failure; supports online upgrade Power supply through storage battery Supports watchdog mechanism to ensure the operation stability

 Support 100,000 valid cards & 150,000 records Support multiple cards Support card, password, fingerprint and combination TCP/IP interface to PC Wiegand or RS-485 interface to readers(2 door) Door time out alarm, intrusion alarm, duress alarm and tamper alarm Anti-pass back, multi-door interlock, multi-card open Support 128 efficient time and holiday schedules Watch dog function ensure device free from halting Surface mounted installation Accumulator battery extension

 Support 100,000 valid cards & 150,000 records Support multiple cards Support card, password, fingerprint and combination TCP/IP interface to PC Wiegand or RS-485 interface to readers Door time out alarm, intrusion alarm, duress alarm and tamper alarm Anti-pass back, multi-door interlock, multi-card open Support 128 efficient time and holiday schedules Watch dog function ensure device free from halting Surface mounted installation Accumulator battery extension

The ACTpro 4000 two door controller from Access Control Technology (ACT) Ltd is the latest product to be added to the hugely popular ACTpro range of access control solutions. This two door controller has been designed to suit installations where the traffic volumes are large and changes to the card holder database are a daily occurrence.  Networkable to up to 4,000 doors the ACTpro 4000 can manage up to 60,000 users and changes to large databases can be affected up to ten times faster than previously. Installation has been simplified by the inclusion of an auto-discovery button in the ACTWin 2.8 software. When this is pressed all the controllers and door stations on the network are located. The installer can view the controller configuration and verify network communications via a specially designed controller status web page.  The ACTpro 4000 is a popular addition to the ACTpro range. This scalable card access control system has been designed to facilitate the most demanding requirements for any size of enterprise.  Highly flexible and feature rich the ACTpro access control solution can currently be found in government sites, major educational facilities, pharmaceutical organisations, hospitals, prisons and retail chain stores.

Supports 4 door control. It can extend up to 62 DS-K2M002X access modules, and up to 128 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports a wide range of reader technologies including OSDP and Wiegand Supports multiple reader and card formats for maximum flexibility and security options Operating modes includes locked, unlocked, secure access, card only, card and PIN, card or PIN and PIN only Any combination of 16 downstream I/O or reader modules may be connected to the intelligent controller RS485 ports Supports the choice of normally open, normally closed, supervised, and non-supervised circuits System off-line modes customisable per reader include secured access, locked (no access), and unlocked (full-access) Provides I/O support for 2 doors in WIN-PAK 4.9 or higher Anti-passback support - free pass and exempt flags, last area accessed, last reader accessed and time/date of last access Large, local controller database allows access control decisions to be made by controller in real time without the need to communicate to the server ADA compliant allowing expanded door times selectable per reader Alarm conditioning with programmable sensitivity and hold time Enhanced Cyber Security Port based network access control using 802.1X Host communications protected by TLS 1.2/1.1 or AES-256/128

Supports 1 door control. It can extend up to 62 DS-K2M002X access modules, and up to 125 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports 4 door control. It can extend up to 62 DS-K2M002X access modules, and up to 128 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports 8-door control. It is formed by 2 DS-K2M002X access modules, and one 4-doors access controller Access controller: downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Access Module: supports 8-ch RS-485 interface for card reader connecting Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

Supports 1 door control. It can extend up to 62 DS-K2M002X access modules, and up to 125 doors can be controlled Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Web configuration management. All configurations can be realized via web without software application Supports professional access control applications such as multi-door interlocking and anti-passback Supports backup battery access. Charging and discharging are available It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection

The ACTpro 2000 is a two door controller extending to a total of sixteen doors via ACTpro 100/200 door expanders.  In turn up to 128 ACTpro 2000s may be networked via a PC interface to facilitate up to 2000 doors. The ACTpro 2000 can be configured and maintained standalone or through ACTWin pro PC software.  The ACTpro 2000 may be networked via RS485 interface.

The SALTO CU5000 is a single door off-line door controller that can have 1 or 2 wall readers connected and has a 2 control relay outputs. Compatible with SALTO relay extension board (EB5008) controlling up to 128 relay outputs suitable for elevators, etc. Compatible with SALTO relay extension board (EB5008) controlling up to 128 relay outputs suitable for elevators, etc. User on card audit trailing capability for audit trailing via the SALTO Virtual Network (SVN).

Dynamic screen functionality allows automatic updates of your web browser to show alarms and event information without having to hit the refresh button in your browser. Export reports for analysis or record keeping. Assign card holders different levels of access for added layer of security. Supports multiple users with different global languages simultaneously. Configure a site using 2 and/or 4-door controllers

Gallagher Controller 6000 (C6000) is the interface between the Gallagher Command Centre Server and the distributed field hardware. Capable of processing, storing and communicating data in real time when the Gallagher Command Centre Server is offline. The Controller 6000 uses straight forward system architecture to provide powerful and flexible configuration.

The DSX-1040PDP Power Distribution Panel is the supervised power plant for the DSX-1048PKG Intelligent Controller.

The ACTpro 120 2Amp is a single door station with a built-in 12 Volt power supply housed in a steel metal cabinet.  It facilitates the expansion of an additional door on the ACTpro 1500, ACTpro 2000, ACTpro 4000 and ACTpro 4200 controllers. Benefits at installation Faster Install: the combined controller / PSU is a quicker install than a separate controller and PSU Compact: much less space is needed than when installing a separate controller and PSU Benefits after Installation 5 Year Warranty Voltage Monitoring through ACT Software: fast diagnostics of potential voltage issues at the door without having to access the controller / PSU - an early indication of problematic locks Break Glass monitoring: monitor the breakglass status in real-time Current Limiting: protects against short circuits in the system What are our installers saying about the ACTpro 120? “Monitoring the voltage to the door stations and controllers through the ACT software helps us detect potential voltage problems before they arise without having to open the unit to measure the supply voltage with a multi meter” -Bobby Corrigan, Ultimate Security on the ACTpro 120.

The ACTpro 200 is a two-door expander for use with the ACTpro 2000 and ACTpro 3000 Door Controllers.  With a built-in, monitored 3 Amp power supply, the ACTpro 200 is designed to support two doors.  There are two separately monitored fused 12V outputs for the door locks.  The unit can also support two 7AH batteries and has a battery test facility built in as standard.  The ACTpro 200 has also got extensive reporting facilities such as: fuse blown, battery fault, mains fault etc.  The ACTpro 200 can also have two ACTpro 100 pcbs mounted on the controller door thus making this a four-door controller.The ACTpro 200 can be utilised to extend the number of doors controlled by an ACTpro 2000 or 3000 Controller.  Individually these Controllers manage two doors and with the ACTpro 200 this number can be increased to a total of sixteen doors.  The use of the ACTpro 200 Door Expander for additional doors greatly reduces the system installation time.  For systems involving more than 16 doors up to 128, ACTpro Door Controllers may be networked via a PC interface to facilitate a total of 2000 doors.  These Door Controllers can be configured and maintained standalone or through ACTWin pro PC software.  The ACTpro 2000 may be networked via RS485 interface and the ACTpro 3000 via RS485 or the built in TCP/IP capability.This door expander is part of the ACTpro range, a scaleable card access control system that has been designed to facilitate the most demanding requirements for any size of enterprise.  The system is a highly flexible, single or multi user system for one or more sites.The software used with the ACTpro systems, ACTWin Pro, is a feature rich program that facilitates functions including Global Anti-Passback Support, Global Input/Output support, Communications Service Module, Validity Times, Multiple User Cards, Enhanced Reports and Counting Areas.  Features to be included in the latest version of the software include DVD Integration and Alarm Notification.  This is due for release during Quarter 4, 2007. 

Standalone, 8, 1,000, 12 V DC, 200 mA, 110 x 190 x 57, 340, -10 ~ +50

Symmetry M2150-4DBC controller supports 20,000 cardholders (expandable to 250,000) and up to 16 card readers with the addition of optional door controllers. Includes integrated RS232 port. Door input and output controllers connect using RS485.

Access Control Technology (ACT) Ltd. have added a built-in12Volt DC 2A power supply option to the ACTpro 1500 controller and the ACTpro 100e door-station. The ACTpro 1520 controller and ACTpro 120 are powered from the 12Volt supply and are prewired for tamper monitoring and mains-present monitoring. They will save installation time with just a single metal enclosure to install. Both products include the ACT 5 year warranty. The power supply outputs the full 12Volt DC 2A and has an additional 0.5A for battery charging. The power supply status is displayed on the front cover with LEDs and can be monitored directly using the integrated webserver in the ACTpro 1500 or the ACT software which displays the actual voltage output. The supply voltage can be monitored on the web server in the ACTpro 1500 controller or from the ACTWin software.

Key features: 100% browser based application factory installed by Avigilon Simplified programming and navigation IP enabled controller Supports offline mode Removable terminal blocks for easy installation Plastic enclosure protects vital components HID VertX V200 input control interface and V300 output control interface supported

240,000 cardholder capacity Supports up to 520 inputs and 516 outputs Natively supports up to 4 readers and 2 openings, expands to 64 readers/openings IPv4/6, TLS1.2, 802.1X FIPS 140-2 user of OpenSSL

With enclosure Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

An advanced access control hardware architecture capable of providing solutions for large enterprise applications Performs access control, alarm management and scheduled operations Provides power and flexibility with an embedded Linux OS, improved processor and increased memory as well as onboard crypto chip which adds an additional layer of security to sensitive data. Monitors alarm input points, relay output points and interface with access control readers Comes with 2 on-board reader ports that support multiple reader communication protocols including Wiegand and OSDP (V2) Secure Channel Protocol (SCP) Latest encryption standard support with TLS1.2 and OSDP (V2) Secure Channel Protocol Functions independently of the host for performing numerous access control applications and supports OSDP, OSDP Secure Channel, keypads, biometric readers, Wiegand and clock and data

iSTAR Edge G2 board only, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware

The CK721-A is an advanced, intelligent network controller capable of handling high volume, high-speed traffic with host security management systems. Easily integrated with Johnson Controls P2000 software, the CK721-A retains many of the same capabilities as the CK720 and can be programmed remotely or through its own interface.

ACTpro 4200 is a four door controller that can extend to a total of 16 doors via ACTpro door stations. It can be networked via a PC interface.

OSDP Reader Support - Increases security and functionality with secure channel and bi-directional communications IO Module Encryption - Enhance security between intelligent controller and IO modules with AES encryption Crypto Chips - Protect against malicious attacks to keep keys and passwords safe Threat Levels - Define up to 7 different threat levels that are used to instantaneously adjust user access during lockdowns and lockouts High Amp Relays - Ensure controller protection from power hungry locks and enables wider choice of egress hardware Open Architecture – Work with a variety of software partners over time without any re-investment in hardware

Vicon VAX-MOD-MEM is a module to expand memory, required for anti-passback

Vicon VAX-EXP-2D is used to expand 2, 4 or 6 multi-door kits; no enclosure

Vicon VAX-BK-BOX is a backing plate for mounting VAX door controllers on concrete walls.

Vicon VAX-MOD-24 is a module to convert lock power from 12 VDC 500 mA to 24 VDC 250 mA.