Access Controllers  (776)

TDSi 5002-1907 is a MICROgarde I TCP/IP networked access controller with 3A power supply. It features built in RS-232/RS-485 converter, reversible 2-wire RS-485 communication, & diagnostic LEDs. Additional I/O and TCP modules enable system integration and complete flexibility.

The eDCM 300 (Door Control Module) is a low cost, two-door controller designed to interface third-party read heads with the CEM range of access control systems.

Power Supply, 2.5 Amps, 6V/12V/24V Selectable Output

Linear DXT-41 1-button, 1-channel keyring transmitter is a battery powered, portable, miniature transmitter designed for use with DX Format receivers. It can be used in a limitless number of wireless remote control applications.

Net2 nano 1 door controller - 12V 2A PSU, Plastic cabinet

Networks DIGI*TRAC controller to PC (with Velocity Version 2.6 SP2 or later only) via 10/100 Ethernet (TCP/IP), RS-232 (direct connect only), or RS-485 (solo controller only).  Optically isolated RS-485 and RS-232 ports.  RS-485 for multidrop between SNIB2s at baud rates up to 115KBps or SNIB at 9600 Bps.  Supports AES (128 bit Rijndael) encryption between host PC and Master SNIB2 and between Master SNIB2 and downstream SNIB2.  Master SNIB2 supports integral XBox functionality for globalization.  UL Listed.  CE.

AMAG SR-PSC6 is a 6 Amp UL listed power supply in enclosure.

aka PAC 2244. 2-door multi function controller. Works as part of a stand-alone or networked system. With support for up to 4 alarm event managers, 32 alarm inputs. No front programming panel or metal case. Can be used with PAC proximity readers, KeyPAC proximity readers, PAC magnetic stripe readers, and Wiegand readers, including hands-free readers.

The Edge Network Controller supports two doors and provides four general purpose inputs and two general purpose outputs. It can be powered by either a local power supply or Power over Ethernet (PoE+). The Symmetry 2 door Edge network door controller is a security appliance for access control system providing distributed intelligence, resilience and fast response to access requests.

DIGI*TRAC M16 Controller Board.

Keyscan’s OCB8 is a form-C relay output board constructed for durable, reliable, long-term operation. Use with Keyscan’s door and elevator floor control units or wherever you need a dry contact closure for auxiliary equipment. Expand floor control for Keyscan’s EC1500 and EC2500 elevator floor controllers Add auxiliary outputs to CA4500 and CA8500 door controllers to trigger devices such as sirens, alarms, strobe lights or further restrict access Time programmable

AMAG SR-RFK5 is a retrofit kit with SR-DBU and SR-PCU controllers.

Net2 plus 1 door controller - Plastic housing

Model UGM is a control unit with PSU for 8 doors while model UGL is a controller for 128 doors, 2944 cardholders and 17,664 badges (6 per holder). The systems can incorporate multi-reading technology and communicate via an RS485 bus. 30 system time zones and 16,000 event memory. Compatible with On-Line readers such as models LPMI/ LPM/ LMM/ LIM/ LMED. Optional: LOG/MT software which enables user to modify, save and view all information available in controller; and CMPP learning reader for programming cards/tags.

32 door Net2 system from PaxtonIris scannerBullet proof security boothCCTV integration Gyron are a leading UK provider of data centre services. The dynamic company has expanded from their London Docklands facility to a new site in Hemel Hempstead, where they offer customers the highest standards for colocation and managed hosting.They have a diverse range of clients, from government departments and large IT consultancies to multi-billion dollar global enterprises. It is essential to offer them a high level of security at Gyron's facilities.Ben Miller, Gyron's Operations Director says: "Think of us as technical landlords, some customers are hosting up to a quarter of a million websites each. They really need to be sure of how advanced our technical facilities are."Robin Balen, Gyron's Managing Director says: "In addition to ensuring all the technical aspects of our new centre are first class, we needed to ensure that our security systems are top class as well."An important part of the security offered is the access control system.  Robin says: "Without access control we wouldn't have any customers."Net2 provides the flexibility needed and the audit trail that is essential for Gyron's business. Anyone visiting Gyron has to pass through stringent security. Barriers and rising bollards protect the car park, with the secure data centre guarded by a full height, bullet proof glass ‘man trap'. Users gain access using their token then, once inside, an iris recognition reader checks their credentials and performs an ultrasonic scan to ensure only one person is present, before granting access to the secure area. The iris reader is linked into the Net2 system, giving a full event log of people moving into and out of this area.

Linear DXT-23 3-button, 4-channel handheld transmitter is a battery powered, portable, miniature transmitter designed for use with DX Format receivers. It can be used in a limitless number of wireless remote control applications.

Boxed Easikey 250 (pre-wired controller in a metal case with cut-out & 3.0 Amp PSU

Net2 Plus 1 door controller - PoE+, Plastic cabinet

DIGI*TRAC M2 Controller Board.

Switch2 controller - 12V 1A PSU, Plastic housing

Net2 Plus 1 door controller - 12V 2A PSU, Metal cabinet

DIGI*TRAC MSP-64/R system processor board.

Designed for use with the Premier iProx and Texecom Proximity Tags, the Premier External iProx Coil allows the user to disarm the alarm system externally. Can also function as a single door access controller.

Model UGL is a control unit with PSU for 8 doors while model UGM is a controller for 128 doors, 2944 cardholders and 17,664 badges (6 per holder). The systems can incorporate multi-reading technology and communicate via an RS485 bus. 30 system time zones and 16,000 event memory. Compatible with On-Line readers such as models LPMI/ LPM/ LMM/ LIM/ LMED. Optional: LOG/MT software which enables user to modify, save and view all information available in controller; and CMPP learning reader for programming cards/tags.

AC-3114 eight-door system controller (expandable to 32 doors)supports up to 16 RS-485 devices (readers, clocking terminals, door controllers and I/O controllers) 8 digital inputs, 8 relay outputs RS-232 interface to PC (cable included) 2,500 cardholders, 1,700 event logsKeyMaster Lite software provides sophisticated access control for smaller installations.  Features include:easy installation, cardholder photographs, multi-language, PIN keypad support, multiple site control, anti-passback, site control via LAN or modem, multiple companies, mantraps and turnstiles, fire sensor inputs, public holidays, time schedules, time & attendance reporting, full online help, compatible with Windows 95/98/NT4/2000/Me/XP.KeyMaster Lite communicates with AC-3114 controllers via direct serial port connections or dial-up modems.  Using an Ethernet/ RS-232 bridge, you can also set up communication with controllers via a corporate LAN or the Internet.

Up to 2048 doors Failover option Energy saving Less rack space used Easy migration from old RTC units Cost saving if renting multiple VM server units

Up to 2048 doors Failover option Energy saving Less rack space used Easy migration from old RTC units Cost saving if renting multiple VM server units

Up to 2048 doors Failover option Energy saving Less rack space used Easy migration from old RTC units Cost saving if renting multiple VM server units

Up to 2048 doors Failover option Energy saving Less rack space used Easy migration from old RTC units Cost saving if renting multiple VM server units

BPT Impro 2 Door TCPIP intelligent controller that comes with 3A PSU

AMAG SR-CV5 is an enclosure cover with lock & keys. It allows LED display.

Battery, 12V, 7Ah, Gel Cell

DIGI*TRAC PS2 Controller Board.

The Mounting Plate provides a full footprint mounting plate for the Controller 7000 Single Door. The Mounting Plate allow installation in existing Gallagher cabinets and third-party cabinets that have been designed with Gallagher full footprint mounting points. There is also an optional mounting location to accommodate a Controller 7000 Single Door Relay Board.

The Controller 7000 Single Door Relay Board allows the open collector output to drive the relay board’s dry contact relay. Ideal for doors with multiple locks and is complemented with Command Centre enhancement.

AC-3151 door controllers connect to the RS-485 interface of an AC-3114 system controller. Each AC-3151 unit provides two Wiegand reader interfaces, four digital inputs and two relay outputs.

DIGI*TRAC M64 Relay Board.

 Two Wiegand reader inputs Two solid state dry contact relays Integrated lock power (12V DC, 500mA) Four configurable inputs Infrared motion sensor Up to 100,000 card holders Built-in diagnostic LCD PoE powered Custom scripting and actions available NDAA and TAA compliant UL and ULC Listed (UL 294/ULC 5319-05)

Verex 120-8510 is a 110V to 16.5V Plug-In Transformer, 40VA Class 2, No Retainment Screw

The Class 5 Cabinet, Controller and PSU comprises of the base elements for a Class 5 compliant alarm system installation.