Access Controllers  (733)

Traditionally, an advanced access control system has consisted of several layers of hardware, with each layer comprised of multiple components.  The LNL-2220 flattens this into a single layer, eliminating the separate controller layer entirely.The LNL-2220 revolutionises access control system architecture by allowing Ethernet connection directly from an entry location to the server.  It provides the security, functionality, and modularity of Lenel's proven hardware platform, by combining an IP-enabled intelligent system controller with a full-featured, two-door reader interface module.  It is a new class of device that makes access control simpler, more powerful and more reliable, and is the perfect solution to enable any reader to become an IP reader.Key features include:Native Ethernet for direct connection from its processor to the security LANUp to eight times the throughput of serial-to-Ethernet conversion used in previous generation devicesFaster downloads, a dramatic increase in performance, reduced installation time, and fewer connections-for greater reliabilityThe convenience of IP-to-the-edge with the security of dedicated reader wiring through the secure perimeterOn-board reader ports support D1/D0, Clock/Data, F2F, and the OSDP open standard for bi-directional communication with access readersComplete flexibility in choice of reader brand, technology and form factorBroadest support for biometric and smart card technologies in the industryDownstream RS-485 port connects up to 32 devices (64 doors), providing an inherent growth pathFault-tolerant, with the highest level of offline performance possible

OSDP Reader Support - Increases security and functionality with secure channel and bi-directional communications IO Module Encryption - Enhance security between intelligent controller and IO modules with AES encryption Crypto Chips - Protect against malicious attacks to keep keys and passwords safe Threat Levels - Define up to 7 different threat levels that are used to instantaneously adjust user access during lockdowns and lockouts High Amp Relays - Ensure controller protection from power hungry locks and enables wider choice of egress hardware Open Architecture – Work with a variety of software partners over time without any re-investment in hardware

Vicon VAX-MOD-DRY is a module to convert lock 12 VDC output to dry contact output.

Open Architecture - Use of hardware with Mercury OEM partners’ software solutions IP-to-the-Door - Supports PoE+ power, removing the cost of traditional power supplies and homerun wiring Enhanced Security - Embedded crypto memory chip and data-at-rest encryption OSDP Protocol - Secure channel security for reader connectivity Versatile Interoperability - Same reliable interface and identical footprint as the EP controllers

Protocol independent. Can be used in any data communication system as a Short-Haul Modem to transmit data at rates up to 57.6K bit over a 2 twisted pair cable for 4,000 feet.

Up to 40 reader interfaces(up to 20 doors) 250,000 cardholders  TCP/IP to connect to the host  Reports all activity to the host  Reports supervised inputs/alarms with 255 priorities  Fully functional offline operation when not actively communicating with the host : access decision, event logging  Max. 32 expansion modules

 Ultra Performance Highest Operating Illuminance Enhanced Security IR-based image analysis to prevent spoofing by printed images and LCDs

For one door with one reader and 125,000 cardholders  TCP/IP to connect to the host  PoE (802.af) support  Reports all activity to the host  Fully functional offline operation when not actively communicating with the host : Access decision, event logging  Interface with one wiegand or clock-and-data reader

Up to 2 reader Interfaces (up to 2 doors) and 250,000 cardholders TCP/IP to connect to the host  Reports all activity to the host  Reports supervised inputs/alarms with 255 priorities  Fully functional offline operation when not actively communicating with the host : access decision, event logging  Inputs for 2 door monitoring

Vicon VAX-1D-REX single door access control controller offers a unique design and patent-pending hardware that provides the option of over-the-door mounting and edge approach. Vicon access control is a full-featured credential-based system running on a TCP/IP network. It can be accessed and controlled by a standard web browser on a local or wide area network, the Internet or a wireless network. No software installation is required to access the system. It is fully compatible with ViconNet® video management system and combining the two provides a complete solution for access control and video surveillance applications from small systems to very large systems is thousands of access/monitoring points.

Cost Effective Wiring - Full-featured local door control module lowers wiring costs & reduces installation time Distributed I/O for One Door - Lower wiring costs by keeping it local.Up to 4 supervised inputs, 3 outputs in a compact door module Status LEDs on inputs and outputs for flexible control and troubleshooting. Versatile Communication - Choice of OSDP* Secure Channel or Software House “RM” via onboard dip switch. Plug-in screw terminals and built-in tamper switch provides secure and efficient installation Flexible Output Wiring Choices - Additional internal connections support magnetic lock features and accommodate local bypass switch.

The Galaxy Door Control Module (DCM) enables the flexible access control facilities to be exploited. Each DCM provides fully integrated security for up to two doors.

Vicon VAX-2D-REX two door access control controller offers a unique design and patent-pending hardware that provides the option of over-the-door mounting and edge approach. Vicon access control is a full-featured credential-based system running on a TCP/IP network. It can be accessed and controlled by a standard web browser on a local or wide area network, the Internet or a wireless network. No software installation is required to access the system. It is fully compatible with ViconNet® video management system and combining the two provides a complete solution for access control and video surveillance applications from small systems to very large systems is thousands of access/monitoring points.

AES 128/256 bit data encryption Supports OSDP, OSDP Secure Channel, FICAM government profiles, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies RS-485 host connectivity High performance, reliable platform enables use of hardware with HID Mercury OEM partners’ software solutions Supports OSDP and Secure Channel protocol for device connectivity, file transfer and extended applications such as biometrics and federal government profile support Embedded crypto memory chip provides secured layer of encryption to protect sensitive data

An advanced access control hardware architecture capable of providing solutions for large enterprise applications Performs access control, alarm management and scheduled operations Provides power and flexibility with an embedded Linux OS, improved processor and increased memory as well as onboard crypto chip which adds an additional layer of security to sensitive data. Monitors alarm input points, relay output points and interface with access control readers Comes with 2 on-board reader ports that support multiple reader communication protocols including Wiegand and OSDP (V2) Secure Channel Protocol (SCP) Latest encryption standard support with TLS1.2 and OSDP (V2) Secure Channel Protocol Functions independently of the host for performing numerous access control applications and supports OSDP, OSDP Secure Channel, keypads, biometric readers, Wiegand and clock and data

The MR62e Series 3 is an IP-enabled interface module with on-board flexibility to connect a wide range of security devices. The MR62e is easy to install and provides the required I/O for interfacing four card readers using OSDP protocol, six general-purpose input monitor points and four control relays to any Mercury series intelligent controller. Key Benefits: Open Architecture - Use of hardware with HID Mercury OEM partners’ software solutions OSDP Protocol - Secure channel security for reader connectivity Enhanced Security - Embedded crypto memory chip and data-at-rest encryption IP-to-the-Door - Supports PoE+ power, removing the cost of traditional power supplies and homerun wiring Versatile Interoperability - Same reliable interface and identical footprint as the EP controllers

In metal enclosure Cost-effective IP access control module Up to 32 IP-ACMs per iSTAR Ultra and iSTAR Ultra SE, and up to 8 per iSTAR Ultra LT Convenient second port for biometric reader or efficient network diagnostics Wet lock outputs provide up to 0.75A each for ability to power most lock types Highly distributed architecture PoE or PoE Plus 10/100/GigE connectivity AES-256 network encryption Configurable offline mode Easy setup with static IP or DHCP Small, ‘office-ready” enclosure design Full duplex RS-485 on board to leverage future technology Selectable “wet” and dry output relays OSDP support fosters device interoperability Supports TLS 1.2 and 802.1X secure network protocols for protection against the threat of cyber attacks

Reports supervised inputs  Connects to the V1000 via RS-485  Receives and processes real-time commands from the V1000  Reports all activity to the V1000  Attractive polycarbonate enclosure protects components from damage  All connections and indicators are fully identified by silk-screened nomenclature on the cover

With enclosure Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

The DSX-1048 Intelligent Controller is an independent processing 8 door package designed to be a cost effective building block platform that allows expansion in a scalable manner. Up to 8 doors can be controlled from 1 enclosure for an efficient space saving package. The controllers are strategically placed throughout the customer location connected together with a two twisted pair cable. Each DSX-1048 operates as a fully intelligent and independent controller that retains all data necessary for system operation in its own RAM. With its integral real-time Clock and Calendar it performs Time Zone control with Holiday overrides for inputs, outputs, and cards even when communication to the PC or other controllers is not available. The DSX-1048 carries a Limited 2 Year Warranty.Key featuresScalable architecture 2-8 doorsTCP/IP communicationsIndividual intelligence512K RAM / 512K Flash ROMUL 294 / UL 1076240+ card and keypad formatsFIPS/TWIC card compatibilityReal Time processing and communicationsIntegrated power supply and distribution 

The multi-door master controllers are used when centralized control of multiple doors is required. They can be conveniently mounted in equipment rooms for control elsewhere in the system.

Expandable to 124 doors. 

The Vicon Access Control (VAX) system consists of a dedicated Vicon Access Control Server and the edge Controller(s). The Server contains the operating system, database engine, web server, application software and configuration data. The Controller communicates back to the Server over the network and provides an interface to readers, relay outputs, door locks, etc.

Reports supervised or unsupervised alarm circuits  Off-normal condition programmable for each input point (NO or NC alarm devices may be used)  Connects to the V1000 via RS-485  Receives and processes real-time commands from the V1000  Reports all activity to the V1000  Enables complex input/output linking when used with the V1000 and V300 output control interface  Attractive polycarbonate enclosure protects components from damage

The Galaxy Door Control Module (DCM) enables the flexible access control facilities to be exploited. Each DCM provides fully integrated security for up to two doors.

The multi-door master controllers are used when centralized control of multiple doors is required. They can be conveniently mounted in equipment rooms for control elsewhere in the system.

Custom Rules Processing - Use X300 in conjunction with custom rules engine on X1100 to create elaborate rules for handling input states Elevator Control - Use in conjunction with X1100 elevator processing engine to control elevator floor access IO Module Encryption - Enhance security between intelligent controller and IO modules with AES encryption Crypto Chips - Protect against malicious attacks to keep keys and passwords safe Threat Levels - Define up to 7 different threat levels that are used to instantaneously adjust user access during lockdowns and lockouts Open Architecture – Work with a variety of software partners over time without any re-investment in hardware

Symmetry M2150-8DBC controller supports 20,000 cardholders (expandable to 250,000) and up to 16 card readers with the addition of optional door controllers. Includes integrated RS232 port. Door input and output controllers connect using RS485.

The multi-door master controllers are used when centralized control of multiple doors is required. They can be conveniently mounted in equipment rooms for control elsewhere in the system.

600,000 cardholder capacity Supports up to 1024 inputs and 1024 outputs Natively does not support any readers or openings IPv4/6, TLS1.2, 802.1X FIPS 140-2 user of OpenSSL

Vicon VAX-2D is a two door controller without integrated PIR/REX and supports back to back readers. The controller provides LED indicators for system status and an LCD display for system diagnostics. Configurable dry contact inputs and relay outputs are supported.

The multi-door master controllers are used when centralized control of multiple doors is required. They can be conveniently mounted in equipment rooms for control elsewhere in the system.

Off-normal status programmable for each input point (NO or NC alarm devices may be used)  12 latching form-C relays, contacts rated at 2A@30VDC  Connects to the V1000 via RS-485 Receives and processes real-time commands from the V1000  Reports all activity to the V1000  Enables complex input/output linking when used with the V1000 and V200  Attractive polycarbonate enclosure protects components from damage

AES 128/256 bit data encryption Supports OSDP, OSDP Secure Channel, FICAM government profiles, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies RS-485 host connectivity Easily connects to HID Mercury’s intelligent controllers Provides all I/O needed for single door control Comprises a small footprint for versatility  High performance, reliable platform enables use of hardware with HID Mercury OEM partners software solutions Supports OSDP and Secure Channel protocol for device connectivity, file transfer and extended applications such as biometrics and federal government profile support Embedded crypto memory chip provides secured layer of encryption to protect sensitive data

Vicon VAX-2D-KIT is a two door kit and includes 1 two-door controller mounted in a steel vented and lockable enclosure.

Includes 8 input/output expansion module 12 VDC input Built-in RS-485 ports complete in metal enclosure Accepts up to 7 expanders to control 64 floors

Gel cell battery, 12 V, 7 Ah

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi connectivity and can be configured in two user-friendly operational modes. The KT-2 can be used with the powerful EntraPass Security Management Software to provide more advanced and fully integrated access control features such as Wi-Fi connection. The addition of the built-in Wi-Fi antenna reduces installation time and costs while providing an ideal solution for projects with infrastructure designs that would traditionally require extensive cabling. Alternatively, the KT-2 builds on the KT-1 by continuing to support Standalone Mode, offering basic two-door security functions without the need to purchase or connect to a security management software.

iSTAR Edge G2 door controller with metal enclosure, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE+, with enough power for two doors and associated devices Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware

Vicon VAX-4D-KIT is a four door kit that includes 2 two-door controller mounted in a steel vented and lockable enclosure.