Access Controllers  (776)

2 x 6 keypad layout, Outdoor or Indoor, surface mount.

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

Boxed Easikey 250 (pre-wired controller in a metal case with cut-out & 3.0 Amp PSU

Combines both the single door controller and a video recorder into one unit Two 2.5" hard disk drives can be installed in a RAID1 arrangement for storing footage Provides storage & processing for up to four third-party IP cameras Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors

Infineon's SLE 66CUX640P controller is for use in all USB applications, ranging from USB-enabled smart card readers/cards to USB dongles.

The elegance of an ultra-slim flush-mounted look without the need of a flush mount bracket.  This unique controller is only 6 mm thick.  The PIEZO-ELECTRIC metal buttons residential, commercial, high traffic, and public locations.  The unit resists the elements such as glue, oil, rain, ice, snow.  This unit has added security with the addition of the PS-15T Secure Power Supply (required).

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

RFID MIFARE® compatible door controller with keypad Provides proximity access for up to 600 Code/Card Clients, including 2 Panic Clients Pulse Mode allows an adjustable re-lock time to be set between 1-99s (5s default) Latch Mode enables passage functionality allowing Code or Card Client free access Dual Authorisation requires a valid Code and Card Client to be presented in order to allow access Reader Mode where the unit acts as a Wiegand reader linked to another unit LED status indicators and backlit keypad The Door Airlock function allows two door controllers to be linked. For example, the first door will require closing before the second door can be opened Configurable penalty time Anti-tamper sensor Surface mounted Conforms to IP66

AES 128/256 bit data encryption HSPD-12/FIPS201 compliant UL 294 recognized, CE compliant, FCC, RoHS Supports OSDP, OSDP Secure Channel, FICAM government profiles, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies RS-485 host connectivity

2 door boxed controller which can be used with all Easi and PAC readers including AVR and the PAC wiegand interface. With eight time profiles, Boxed, pre-wired in a metal case, with cutout . 1,5 Amp PSU with alarm monitoring.

Combines both the single door controller and a video recorder into one unit Two 2.5" hard disk drives can be installed in a RAID1 arrangement for storing footage Provides storage & processing for up to four third-party IP cameras Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors

Baran Advanced Technologies, manufacturer of the Everswitch access control products, introduces the Everswitch ATP2 family of products. It is another first from Everswitch: a fully sealed polycarbonate Piezo keypad with or without an integrated HID reader, either 125 KHz or 13.56 MHz. Inside the keypad is the same innovative patented Piezo technology that is used in the Everswitch rugged metal vandal-proof keypads. This design is fully weatherproof, IP68 dust & waterproof rated, and has no moving parts.The ATP2 comes with a variety of product features such as background illumination and choice of keypad colour. The ATP2 operation temperature is from -4 F (-20 Celsius) and up to 167 F (75 Celsius). These keypads feature a single gang back plate.

RFID MIFARE® compatible door controller with keypad and doorbell connections Provides proximity access for up to 600 Code/Card Clients, including 2 Panic Clients Pulse Mode allows an adjustable re-lock time to be set between 1-99s (5s default) Latch Mode enables passage functionality allowing Code or Card Client free access Dual Authorisation requires a valid Code and Card Client to be presented in order to allow access Reader Mode where the unit acts as a Wiegand reader linked to another unit LED status indicators and backlit keypad The Door Airlock function allows two door controllers to be linked. For example, the first door will require closing before the second door can be opened Configurable penalty time Anti-tamper sensor Surface mounted Conforms to IP66

Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors 12V lead acid battery back up

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

AMAG Symmetry G4T-M2150-002 8DC is a door controller that extends database unit and database controller to support up to 16 readers. The multiNODE M2150 range of controllers provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

Open Architecture Communication Protocol. Expandable up to 24000 Cardholders. Stores up to 4000 transactions. Supports RS-232, Optically Isolated RS-485 and Dial Up Communication. 16 Elevator Floors. MicroELV controllers can be installed with existing LiNC-NET system. Can also intermix with Ultimate Series, IQ Series and SIM Series controllers.

The ISC has an embedded Linux server that provides a web interface for controlling and managing the SmaX system.  The SmaX database resides in the ISC and can be easily backed up to a computer facilitating redundancy requirements.  The ISC has an RS485 interface to provide direct connection to the Secure Relay Module (SRM) and devices connected to the system.

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

The sDCM 300 (Door Control Module) is a low cost, two-door controller designed to interface third-party read heads with the CEM range of access control systems.

Symmetry MN-DBU-PLATE is an adapter plate to mount EN-LDBU in ENC1 enclosure. The Symmetry EN-LDBU controller provides distributed intelligence and allows ASSA ABLOY Aperio™ wireless locks to be fully integrated into a Symmetry Access Control System. Aperio wireless locks enable additional doors such as individual offices, meeting rooms and store-rooms to be added cost effectively to an access control system.

240,000 cardholder capacity Supports up to 130 inputs and 130 outputs Natively supports up to 4 readers and 1 openings, expands to 17 readers/openings IPv4/6, TLS1.2, 802.1X FIPS 140-2 user of OpenSSL

Operation Time of all I/Os programmable by keypad.  Keypad lock by try-out error alarm function.  Chime bell output.  Tamper switch.

Provides 10/100 Ethernet or direct connect RS-232 to host PC with XBox globalization to downstream controllers.  Provides up to 115KBps RS-485 and AES (128-bit Rijndael) encryption between "N2" controllers.

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

3 x 4 keypad layout, Outdoor or Indoor, surface mount.

The C6000 is an IP based controller, capable of managing all localized access control, intruder alarms, perimeter security, business automation and  logic needs for an organization. Able to operate independently from the Command Centre server, the C6000 ensures predefined responses to monitored events, site safety and continuity. The C6000 features a highly scalable system design, able to scale from single controller systems to global systems with 1,000+ controllers.

Gallagher GBUS I/O Devices provide flexible, cost effective input and output expansion options with an option to connect readers. Gallagher GBUS I/O Devices include the:Gallagher 8-Input Expansion InterfaceGallagher I/O Expansion InterfaceGallagher High Density I/O Interface Gallagher GBUS Universal Reader Interface

The C7000 Product Range are IP based controllers that can manage all localized access control, intruder alarms, perimeter security, business automation and logic needs for an organization. Able to operate independently from the Command Centre server, the C7000 Product Range ensures predefined responses to monitored events, site safety, and continuity. C7000 features a highly scalable system design, able to scale from single door systems to global systems with up to 10,000 controllers per server.

Parabit 200-20040 is a ACS-1-E- card access system kit with SkimGard. It has a flush mount design and is suitable for both interior and exterior use. In addition, it is made of anodised aluminum bezel and has  stainless steel casing.

AMAG Symmetry G4T-M2150-025 4DC is a door controller that extends database unit and database controller to support up to 16 readers. The multiNODE M2150 range of controllers provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

PAC-22275 is a Boxed Easikey 250 (pre-wired controller in a metal case without cut-out & with 3.0 Amp PSU).Easikey 250 is a simple to use, standalone door controller.

Controls 16 supervised doors.  Can be both standalone or networked.  Digital transmission including long wiring runs, multi-drop connections, Lan Interface options and modem options.  Can perform local or remote programming.  Provides 10/100 Ethernet or direct connect RS-232 to host PC with XBox globalization to downstream controllers.  Provides up to 115KBps RS-485 and AES (128-bit Rijndael) encryption between "N2" controllers.  Only supported by Velocity version 2.6 SP2 or later.  UL Listed.  CE. 115VAC.

High security 5-State Alarm monitoring. Optional onboard Ethernet Communication. Real time Diagnostic Display. Supports virtually all reader types.

The Lenel Output Control Module (OCM) communicates directly with the Intelligent System Controller (ISC) either by 2-wire RS-485 or 4-wire RS-485 communication.  Each OCM is an individually addressed device, and counts as a single device on all Intelligent System Controllers.  Each OCM includes dedicated tamper and power failure input contacts.  The OCM has 16 programmable output relays that can be configured for fail-safe or fail-secure operation. 

CEM DCM/330/101 is a two-door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

This advanced 500 user standalone controller features anti-vandal metal keys for PIN code and/or RFID user credentials.  AC-Q42S has a rugged metal construction ideal for installations in high traffic environments.  This model is epoxy filled, designed to withstand the rigors of the outdoor environment, and has advanced programming options.

Keypad Lock by Try-out Error Alarm Function.  Duress Alarm Function.  Toggle Mode for Door Opening / Closing.  Lock Control by Door Sensor.  Safe (default) / Secure Mode available.  Dual Tamper Switches.  Chime Bell Output.