Access Control Readers  (1,536)

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs, available with or without additional function key and backlit keypad Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

TWN4 Palon Compact M is a versatile OEM PCB for integration into third-party products and devices. It supports enhanced interfaces, especially RS-485. The new compact PCB module inherits all advantages and integrated tool support of the ELATEC TWN4 family. Although it is a general-purpose device, it is optimized for time attendance and access control. TWN4 Palon is a multi-technology reader/writer family supporting almost all 125 kHz and 13.56 MHz contactless technologies, including NFC. On-board antennas for HF and LF allow excellent contactless performance. An integrated Bluetooth Low Energy (BLE) module supports a broad range of mobile ID and authentication solutions as well.

Optimized housing design for easy, fast and secure installation Integrated LF and HF antennas One on-board SAM socket (Secure Access Module) Interfaces: RS-485, RS-232 and Wiegand or Clock/Data. OSDP protocol optionally, USB Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card Direct chip-commands support Integrated BLE module 2.4 GHz for data communication and authentication, BLE v4.2, upgradable Firmware update in the field possible Powerful SDK for writing apps which are executed directly on the reader On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data TWN4 Upgrade Card for P and PI options available on request 3D construction data (STEP) available on request

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs, available with or without additional function key and backlit keypad Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

Facilities can support magnetic stripe, proximity, and smart technology in one reader making the next upgrade in technology simple and seamless. The MTMS15 reads multiple brands of both 125 kHz and 13.56 MHz technologies including Schlage MIFARE® and is also compatible with NFC mobile credentials on iOS and Android platforms.

Optimized housing design for easy, fast and secure installation Integrated LF and HF antennas One on-board SAM socket (Secure Access Module) Interfaces: RS-485, RS-232 and Wiegand or Clock/Data. OSDP protocol optionally, USB Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card Direct chip-commands support Integrated BLE module 2.4 GHz for data communication and authentication, BLE v4.2, upgradable Firmware update in the field possible Powerful SDK for writing apps which are executed directly on the reader On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data TWN4 Upgrade Card for P and PI options available on request 3D construction data (STEP) available on request

Optimized housing design for easy, fast and secure installation Integrated LF and HF antennas One on-board SAM socket (Secure Access Module) Interfaces: RS-485, RS-232 and Wiegand or Clock/Data. OSDP protocol optionally, USB Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card Direct chip-commands support Integrated BLE module 2.4 GHz for data communication and authentication, BLE v4.2, upgradable Firmware update in the field possible Powerful SDK for writing apps which are executed directly on the reader On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data TWN4 Upgrade Card for P and PI options available on request 3D construction data (STEP) available on request

The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), and USB, and is available as a Module and with Desktop housing. TWN4 MultiTech 2 is also compatible with 60 of the most common RFID technologies currently being used around the world. Furthermore, to expand the realm of supported contactless identification methods, the all-in-one reader also supports NFC and optionally Bluetooth ® Low Energy (BLE). It is compatible with the two most used smartphone operating systems, Android and iOS, so it can also be integrated with mobile identification applications. In addition, TWN4 MultiTech 2 is flexibly programmable. When communicating with RFID transponders, it can make automated decisions based on predefined rules. This type of configuration can easily be reapplied to other card readers by using a contactless configuration card, which considerably reduces installation times in large projects. The TWN4 MultiTech 2 BLE reader has integrated RFID (LF & HF) and Bluetooth Low Energy (BLE), which is supported by mobile phones with Android version 4.3 or greater, iOS 8.0 or greater and PCs with Windows (new Bluetooth hardware integrated). The app on the reader communicates with the BLE module with easy commands and has direct enhancement to the GATT structure, which gives you the flexibility to write your custom apps.

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

The new TWN4 Slim is ELATEC’s smallest compact and flat RFID reader – it’s smaller than a credit card. TWN4 Slim supports all common standards for LF and HF technologies (125 kHz and 13.56 MHz). Smartphone identity solutions such as NFC and Bluetooth ® Low Energy (BLE) are also integrated so they can be used for mobile applications in data communication and authentication. It can be used as a standalone unit connected to a PC or other devices with a USB interface using a cable with a micro-USB interface. TWN4 Slim is also perfectly suited to embed it into machines and devices with an optional clip-on snap-in cover.

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

The TWN4 MultiTech HF Mini is built for small size, low power consumption, price and flexibility. Thanks to its compact dimensions, it can be integrated directly into the main circuit board. ELATEC’s multi-technology mini readers support high-frequency RFID and optionally NFC. They are designed for integration into machines, handheld computers or any other devices. Outstanding features are the 4 user-configurable ports (to be configured as input or output), beeper support and an integrated high-performance antenna. The simple ASCII or binary protocol enables quick software development cycles. All host communication takes place via SPI or asynchronous serial TTL interface. The module offers positions for placement for two LEDs that can be software controlled. For applications requiring additional security, there is an external Secure Access Module (SAM). This enables the application to perform secure transactions, e.g., payment terminals, etc.

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

Features:Built-in reader and support one ex-reader125K or 13.56MHz proximity card10,000 users and 10,000 recordsBlue backlit keypad of breathing performanceDisplay available100 sets of time zone regulationDivide everyday into 5 periods with different operation processes3 type of open operations: Card Only / Card + PIN / User No. + PINUse manager card to register card or User No.+PIN without networkingSupport RS485 network and manage by a green softwarePublic password optional, not limit by time zone regulationSupport Anti-duress, input reverse password will open door and output signal to other security systemThe records can be used for attendance managementSuitable for US / Asian mounting box SpecificationsElectronicPower Supply DC 9-15VRower Consumption <200mACard Type DA-302K/DA-302DK read EM DA-303K/DA-303DK read Mifare Number of users 10'000Number of records 10'000Communication Port RS485Relay Output 1, Dry contactData Storage 4M bits Flash MemoryKeypad 12 blue backlit keypadSoftware Green softwareDisplay OLED (DA-302DK/DA-303DK)ModelDimension 9.5cm*9.5cm*2.0cmWeight 180GInstallation EU/Asian standard back boxMaterial ABS+PCEnvironmentTemperature -25°C ~ 70°CHumidity <90%

Appealing flat design with premium look and feel, different colors for perfect architectural integration Easy installation with in-wall flush-mount boxes or on-wall mounting frame Supports LEGIC Connect thanks to integrated LEGIC frontend chip Water and dust protected, IP65 potted housing Interfaces: RS-485, OSDP protocol or Wiegand Dimmable LEDs Proximity sensor, ambient light sensor, tamper switch Versatile remote update and configuration features Mobile app for device parameter configuration via contactless NFC

TWN4 MultiTech 3 M BLE integrates RFID (125 kHz and 13.56 MHz), NFC and Bluetooth Low Energy capabilities into a compact but powerful reader. Its reduced size combined with optimized read/write performance makes it the perfect reader for all applications where small size and full performance matters, e.g. print solutions, driver identification, POS integration and many more. Furthermore, TWN4 MultiTech 3 M BLE provides access to most common host interfaces such as USB, serial (TTL) or I²C which are readily accessible through an on-board connector. TWN4 MultiTech 3 M BLE allows users to read and write almost all common worldwide 125 kHz and 13.56 MHz tags and/or labels. It supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID etc. and ISO standards like ISO 14443A/B (T=CL), ISO 15693, ISO 18092 / ECMA-340 (NFC).

Card types: EM card and Mifare card.

Application Registering cards without the need to go to the lock with the portable programmer or passing a new card through the lock Collecting events recorded on the locks via the user's card: control of their activities, authorised or unauthorised access attempts, etc. Control of the battery status of the locks without the need to test the lock Registering users without the need to reprogram the lock Enables different credentials formats to be used Offers the possibility of multi-application of pre-payment, loyalty, POS programs etc. Specification Reader module Read/write contactless chip identification technology RFID 13.56MHz ISO14443A Phillips MIFARE CLASSIC 1K and 4K and ULTRALIGHT Reading distance: 10mm with standard credentials Compatible with mobile phones NFC Red and green warning LED Control Unit Non-volatile memory Operating modes                          - Standard: Default operating mode, credentials must be moved close by                          - First user: Lock in passageway after first access of an authorised user Connections Connector from the power cable to the power supply Ethernet TCP/IP connector PS/2 connector VGA connector for the screen Connection via relay output and power supply to electromechanical lock (electrical door locking) Connection to back-up battery in the event of a power supply failure Power cable included with the following characteristics: Input: 100-240Vac 50/60Hz, 1A Output: 7.5V - 1.2A Operating conditions Humidity: Up to 85% without condensation (Interior drainage in the reader Temperature between -10°C and 80°C IP54

Card types: EM card and Mifare card.

Elatec’s TWN4 family of transponder readers and writers allows users to read and write to almost any 125 kHz and 13.56 MHz tags and/or labels – it supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO14443A/B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). Our core modules are the foundation of our all-in-one RFID readers thus utilizing the full functionality of our TWN Technology. In order to offer greater flexibility and security, they can be mounted at a random place in a given machine (e.g. bottom of a multi-functional printer) while their antennas can be connected via a cable and situated at a different place in order to allow more convenient identification for users (e.g. ID terminal on the side of a printer). This gives hardware integrators the freedom to optimally use any remaining empty spaces in their machines and attach antennas of their choice. Furthermore, they can communicate through various interfaces like USB, RS232, Serial, I²C, SPI, Clock/Data and Wiegand. The TWN4 MultiTech Core is designed for integration into machines or any other device to be used with an external antenna (125 kHz, 13.56 MHz or both).

The AD34 Door Reader supports a wide array of card types, including both low-frequency proximity cards and high-frequency credentials. This includes ultra-secure, encrypted NFC credentials like Verkada DESFire EV3 cards and employee badges in Apple Wallet. With the AD34, organizations can also provide a secure yet convenient Bluetooth unlock experience with Intent Unlock. Intent Unlock helps prevent unintentional unlocks by requiring both proximity-based Bluetooth authentication and precise unlock intent in front of the reader — such as a hand wave — in order to unlock the door. The AD34 includes a 10-year warranty and is IP65 and IK08 rated, making it suitable for outdoor deployments and harsh environments. It also features an easy-to-install, secured snap-in form factor, and ships with both single gang and mullion mount plates, simplifying nearly any installation. 

ELATEC TWN4 family of RFID readers and writers allows users to read and write to almost any 125 kHz and 13.56 MHz tags and/or labels – it supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO 14443A/B (T=CL), ISO 15693, ISO 18092 / ECMA-340 (NFC). TWN4 MultiTech Nano M is designed for integration into machines or other devices. It can be connected to an external antenna through a printed circuit board (125 kHz, 13.56 MHz or both).

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz) and NFC support Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Compact form factor for easy integration

Back-lit keys Wiegand and relay outputs 2000 users (card or passcode) Keypad user delete for lost cards <30mA standby current 9-25 VDC Operating temp -25°C~60°C Tamper alarm Door call button

The TWN4 USB Front Reader integrates RFID (125 kHz and 13.56 MHz), NFC and Bluetooth Low Energy capabilities into a compact but powerful reader. Thanks to its patented turnable USB connector, which offers a 360° mounting opportunity, the reader can be easily connected to an external USB port. Furthermore, it is equipped with a USB hub that can optionally be disabled. Its reduced size combined with excellent read/write performance makes it the perfect reader for various applications, including but not limited to print solutions and single sign-on. The TWN4 USB Front Reader allows users to read and write almost all common worldwide 125 kHz and 13.56 MHz tags and/or labels. It supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID etc. and ISO standards like ISO 14443A/B (T=CL), ISO 15693, ISO 18092 / ECMA-340 (NFC).

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration Optimized HF and BLE read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz) and NFC support Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Compact form factor for easy integration

Versatile mounting options – adaptable to various surfaces including metal door and window frames Passive devices, no battery required, reducing maintenance needs Compliant with FCC, ICC, CE, C-Tick, UL Standard 294, and IP67 certifications

Flexible mounting options – capable of installation on diverse surfaces including metal door and window frames Operates at a voltage of +5 – 16 VDC with a typical current draw of 215 mA, and a peak at 600 mA at 12 VDC Compliant with multiple certifications including FCC, ICC, CE, C-Tick, UL Standard 2941, and IP67, affirming its quality, safety, and resistance to environmental conditions

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration Optimized HF and BLE read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Flexible mounting options – capable of installation on diverse surfaces including metal door and window frames Passive devices, no battery required, ensuring low maintenance Compliant with multiple certifications including FCC, ICC, CE, C-Tick, UL Standard 294, and IP67, affirming its quality and safety

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration Optimized HF and BLE read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration Optimized HF and BLE read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration Optimized HF and BLE read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Card types: EM card and Mifare card.

This product is an anti-vandal reader, which is specially designed for unmanned and high-security ocassions such as banks, prisons, museums, etc.Features: Rotary surface structure design, the martial is ABS+PC. Applicable to unmanned occasions and highsecurity occasion, as banks, prisons, museums, etc. With standard Wiegand output signal and several keypad formats, compatible with other access control system. Build-in beeper and LED, display the working saturation directly. Could be installed on EU/Asian back box. Sustaining card's types :EM card and Mifare card. Build-in watchdog. A variety of optional color as blue, white Specifications: Electronic: Rated voltage:DC 9-15V  Rated current:>200mA  Sustaining card's types: DR-202 read EM card 8~10cm                                         DR-203 read Mifare card 5~8cm Output signal:WG26/WG34 Input interface: LED control*2/Beeper control*1/Hold on*1  LED: Double color LED*1 Model: Exterior size: 9.5CM*9.5CM*2.0CM  Installation:EU/Asian standard back box Environment: Temperature -25C~70C Humidity <90%

Card types: EM card and Mifare card.

The AD64 Door Reader supports a wide array of credential types, including low-frequency proximity cards and encrypted NFC credentials, like Verkada DESFire EV3 cards or fobs and mobile NFC credentials on Apple or Android devices. It also has a keypad that supports PIN codes to be used as a standalone credential method or as two-factor authentication for added security. The AD64 allows organizations to provide a secure and convenient Bluetooth unlock experience with Intent Unlock. Intent Unlock helps prevent unintentional unlocks by requiring both proximity-based Bluetooth authentication and precise unlock intent in front of the reader — such as a hand wave — in order to unlock the door. The AD64 features an easy-to-install form factor, includes a 10-year warranty, and is IP65- and IK08-rated, making it suitable for outdoor deployments and harsh environments. 

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz) and NFC support in a compact form factor for easy integration Optimized HF read performance Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Support of segment initialization function (LEGIC SM-4500 frontend only)

Possibility to read more than 60 RFID technologies Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE Powerful SDK for writing apps which are executed directly on the module Firmware update in the field possible On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data Supports transparent data exchange with RFID media CCID and PC/SC 2.01 Bluetooth Low Energy 4.1 (upgradable to 4.2) Compact form factor for easy integration