Access Control Readers  (1,572)

Keyscan HID-5365 is a HID MINI PROX 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

IPX7 rated - suitable for external use A simple solution for vulnerable areas A lost card can be deleted in seconds Control over access by token colour Up to 10,000 users on one site All cards are immediately valid

Keyscan HID-5395 is a HID SLIM LINE II PROX 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

The Everswitch family of indestructible access control products consists of single-door, stand-alone self contained access control keypads. All Everswitch access control products utilise the BARAN innovative Piezo technology. The Everswitch keypad's rugged, sealed, non-moving one-piece construction sets it apart from any alternative.Key features include:Vandal proof Tamper proofWeather proof (-40°C ~ 125° C)Water & dust proof (IP68, 100% humidity)

PCSC Single Door Module (SDM) controller has been re-engineered to support PCSC’s patented Fault Tolerant Architecture. It utilises LiNC-NXG and LiNC-PLUS host application systems, the SDM’s provide more features and capabilities with the highest system reliability. It is based on a “single cable” technology solution, allowing you to design door systems with a PoE powered cable. The SDMs are available in a controller only or with an integrated reader.

Universal Wiegand support. 241 g in weight. IP64 protection. Operating freuencey: 13.56 MHz.

Universal Wiegand support. 136 g in weight. IP64 protection. Operating freuencey: 13.56 MHz.

The Door Interface Unit (DIU 210) is designed primarily to provide power to a door lock, as well as local power to a CEM reader when a high level of security is required. It has onboard inputs which can be used to monitor conditions such as a fire alarm or activated Break-glass condition. The DIU 210 improves door security, by allowing the installer to locate lock controls on the secure side of a door, with an intelligent CEM reader on the unsecured side. The DIU 210 communicates with an intelligent CEM reader over a single pair RS485 cable. Upon a valid swipe at the card reader, the reader will instruct the DIU (over the RS485 communications channel) to activate the appropriate output to release the lock using a coded data signal (i.e. coded lock).     

High security mobile solution in an all-in-one S3060 handheld device. Cardholder Details – Stored cardholder photographs are displayed on the reader along with Name, and Date of Birth, allowing for additional visual verification. Mustering – The S3060 portable readers contains the current system muster state, allowing for usage in a muster situation where the muster count is decremented as each person swipes their card. (Mustering is used, for example in the evacuation of cardholders to a safe location in the event of an emergency). A report is provided which shows the details of cardholders who still need to present their card. Roaming - The S3060 portable readers can be temporarily assigned a different pre-defined reader address. This allows a single portable reader to be used across multiple card verification zones. Occupancy Mode – This allows a cardholder head count in a defined area preventing card sharing. Occupancy mode provides the ability to do spot checks on a pre-defined group of people in a defined area, e.g. a bus or plane. Increased Storage – The S3060 portable reader holds over 500,000 cardholder records and up to 50,000 offline transactions.

Protection from scratch and ESD (Electro static discharge).  Optical sensor.  Dual tamper switches.

The Inner Range OSDP <> Wiegand converter is a small inline device which can be used in junction with card readers in order to convert OSDP protocol to Wiegand or Wiegand protocol to OSDP. The device can be configured to provide the following functions: Convert data from a SIFER OSDP reader to Wiegand data for connection to a standard Wiegand reader input. Convert data from any OSDP reader to Wiegand data for connection to a standard Wiegand reader input. Convert data from a Wiegand reader to Inner Range SIFER data for connection to the RS-485 reader input on Integriti or Inception products.

ASPSL- 08-ASPSL-26 is an illuminated proximity reader with keypad.

PCSC Dual Door Module (DDM) controllers is an integrated part of the Fault Tolerant Architecture, providing the highest system reliability in our industry. It has the ability to automatically route system request to another controller during controller failures or communication failures, ensuring the highest level of security with no degradation. It provides door monitoring and control for up to 2 doors.

The CyberKey Vault WR module is a very secure, ruggedised, outdoor vault that stores an un-programmed CyberKey. When approved credentials are presented, the CyberKey is programmed and can then be removed from the Vault.

Supports any phone with caller ID enabled Quad band GSM No token requirement Attach to any Net2 control unit Use with any Paxton clock & data reader

When used in conjunction with the EXgarde access management or the MIFARE Card Programming Station software, this reader allows you to program information to a MIFARE card.

The Door & IO Module is used for controlling a door strike. In addition, it offers input and output lines compatible with indicators, alarms, door sensors, request-to-exit devices, and compatible Wiegand input devices.

AT1G634-200 is an access control for single door.

GB/ISL904 is a multi-site licence, which can control up to 1,000 sites from the single software database.

Morse’s SmartKey® Reader lets you manage keys for your Touch system more quickly and efficiently than ever before. The electronic key reader is designed to work seamlessly with the TrueTouch client software. Add a new key to your existing system – right from your computer – identify an existing key or remove it from the system entirely. Better yet, the TrueTouch interface simplifies the key additions and deletion process, saving you time and reducing input errors. The SmartKey Reader works with KeyWatcher Touch and KeyBank Touch 1.7 and higher. Features: Efficiently add/remove system keys at computer Connects via USB Easily identify a SmartKey Works with KeyWatcher Touch and KeyBank Touch

Parabit 200-20032 is an ACS-1 black insert reader with SkimGard technology. It features 3 point fraud detection system (overlay/tamper/cable cut), remote ACS card reader SkimGard logic board, interface board and decals set.

Parabit 200-10104 is an SkimGard insert reader only for ACS-1 control panel.

Parabit 200-10121 is an ACS-2 black insert reader with SkimGard technology. It features 3 point fraud detection system (overlay/tamper/cable cut), remote ACS card reader SkimGard logic board, interface board and decals set.

AD34 Single Gang Anodized Aluminum Backplate 

Application The wall-mounted reader is to be used as part of access control systems for doors in which the locking or blocking element is an automatism: Automatic doors, a car park barrier, doors with electric or magnetic strike plates, etc. It is a proximity card reader which incorporates a relay and a control unit which manages both the reader and the relay. Via the relay, the control unit will decide weather or not to activate the door's locking element, depending on weather the user who is attempting to open the door has authorised access or not. Specification Contactless - Reading cards/credentials via proximity Autonomous operation -  The wall mounted reader makes decisions autonomously, without any type of external and/or centralised control unit Read and write functionality - Updating user accesses via their own cards/credentials, the events are stored in both the wall-mounted reader and in the users' credentials Low maintenance - The lack of contact between the chip and the reader provides greater durability and low maintenance costs

The completely potted RFID reader MCR is developed for easy mounting over a 55mm switchbox or for surface mounting, using the extra supplied mounting frame. A wide selection of software programs and interfaces allows this reader to be used in all kind of applications. Furthermore, the RFID reader MCR is also available with integrated keypad. Optionally, the RFID reader MCR or MCR/K can be supplied with integrated relay. The following technologies are supported by MCR & MCR-K: LEGIC RF (advant & prime), ISO14443A+B (MIFARE, DESFire, Infineon SLE, SmartMX) ISO15693 (EM4035, Tag-It HFI, Infineon SRF55VxxP, ISO18000-3 mode 1) Sony Felica (ISO18092), NFC (passive mode) Inside Secure (UID only), HID iCLASS ISO5693 (UID only)

Leading global provider of security and safety solutions Ingersoll Rand has launched aptiQ™, a series of multi-technology readers designed to simplify the transition from older security platforms, such as proximity 125kHZ, to smart technology. The new range of electronic access control readers includes the ability to read a variety of contactless technology platforms, such as proximity, XceedID® MIFARE®, and aptiQ™ MIFARE DESFire™ EV1 smart card. The readers are also Near Field Communication (NFC) compliant, giving users the ability to migrate to mobile credentials in the future. To maintain the highest security levels, the aptiQ™ reader allows mutually encrypted communication between the card, reader and diversified keys, which protect data integrity and prevent unauthorised access. Paul Taylor, Sales Leader for electronic access control products at Ingersoll Rand, said: “The aptiQ™ readers are a superior product from both an aesthetic and technological point of view. Our new product range is designed to provide installers with unique advantages over others available on the market today.  Existing proximity systems can be expanded and upgraded to SMART technology with ease, whilst the simplified offering allows one reader to be carried to cover virtually all their maintenance requirements.” “We are so confident that installers will love the new AptiQ range”, he continues, “that we are offering 100 installers an MT15 unit free of charge as part of a Try Me campaign. Anyone interested in receiving one should email [email protected] or call 01922 707400.” The aptiQ™ readers come in four contemporary designs with various colour options to complement a range of décors. Installation is made quick and easy using a simplified mounting bracket and a ‘plug and go’ wiring harness which enables prewiring in new construction and allows for easy maintenance in the future.  For more information about Ingersoll Rand Security Technologies please visit www.ingersollrand.co.uk.

Contactless - Reading cards/credentials via proximity Autonomous operation - The wall mounted reader makes decisions autonomously, without any type of external and/or centralised control unit Read and write functionality - Updating user accesses via their own cards/credentials, the events are stored in both the wall-mounted reader and in the users' credentials Low maintenance - The lack of contact between the chip and the reader provides greater durability and low maintenance costs

Mounting set with two metal plates and fixing screws for Secustos SQ80 LEGIC reader

Mounting frame, gray for Secustos SQ80 LEGIC reader

Cross Point offers a software package for Palm Powered™ handhelds which makes it possible to program XM3 stand alone access control readers.  Users can be added or deleted simply by holding the Palm™ handheld in front of the infra red eye (IRDA) which is situated next to the XM3 reader.  Downloading events and maintaining system settings are possibilities within the standard software package called XM3 manage for Palm OS®.Why a Palm Powered™ handheld?A major benefit in costsaving is that you won't be needing a local area network for small access control situations, say up to 5 doors.  Using a Palm Powered™ handheld, to update your access control system is now quick, easy and cost effective and ….. on the spot!Palm Powered™ handhelds batteries last generally at least 72 hours in comparison to a laptop battery of 3- to 4 hours and Palm Powered™ handhelds are significantly cheaper than laptops!Recommended end-user prices should be less than Euro 1,000 per door for a complete XM3 RFID single door situation using a Palm Powered™ handheld.  Palm Powered™ handhelds can be licensed as programming units by Cross Point.

PC base board used with GRINK readers

Mounting frame, silver for Secustos SQ80 LEGIC reader

Mounting frame, gray for Secustos MU20 LEGIC

Mounting frame, silver for Secustos MU20 LEGIC

Batch card/tag enrollment Cast metal, heavy duty construction Backlit vandal resistant keypad Weather resistant IP68 rated Up to 20,000 users - Supports card, PIN, card + PIN (HID 26, 34 and 37 bit, HID and EM format) 4 to 6 digit PIN code length (1) Form 'C' relay output Tamper alarm output Request to exit device input Door contact input Adjustable door alarm time and door open time Wiegand output for integration with access control systems External 26 to 66-bit Wiegand card reader input 3 year warranty

The terminal is suitable in particular for small- and medium-sized time recording solutions, for which a graphic display with a resolution of 240 x 40 pixels is sufficient for information display. The terminal can also be used commercially and in subsidiaries of larger enterprises. It can store 200 master records and 4,000 booking records. As an option, more master records are possible, for example 1,000 master records and 4,000 booking records or 2,000 master records and approx. 8,000 booking records.

ASSA ABLOY Mullion Reader & BLE – Pigtail Wiegand Output Bluetooth Low Energy capability Wiegand 37-bit output and pigtail lead matching the colours on the Reader Module enable quick and simple installation

ASSA ABLOY Mullion Reader – Pigtail Wiegand Output Wiegand 37-bit output and pigtail lead matching the colours on the Reader Module enable quick and simple installation

The Handkey II system provides a high security solution at a price, which compares to many card based systems.  With Handkey II your hand is your card, allowing access only to authorised persons without having the hassle of a key or a card.  By eliminating the card you reduce the administrative cost, increase security and eliminate the worry for users and administrators about having to keep track of a card or key. Main features: Real security Saves money over card based systemsFast and easy to useIncreased convenience by eliminating cardsIntegrates into existing systemsField proven reliable technologyThe Handkey II brings the true security and convenience of biometric technology easily within reach of most access control applications.How does it work? The Handkey II uses proven hand geometry technology to map and verify the unique contours of a person's hand - all in less than a second.Where can it be used? Once reserved for high security applications, biometric technology is now used in many day-to-day applications from your local health club to day care centres and laboratories.See this product in action at Rotterdam Port