Access Control Readers  (1,546)

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

BQT Solutions BIOMIP3X outdoor biometric reader offers security by combining fingerprint scanning technology and encryption for secure user verification and authentication. It is ideal for new site installations or security enhancements of any existing access control systems using Smart Card or ‘Prox’ (125 KHz) card and reader technologies.

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

125KHz Proximity / PIN and Fingerprint Recognition.  1,000 / 2,000 / 4,000 Fingerprint Users.  ID only Function for Fingerprint Unregistrerable Person.

The AP-600/700 reader, with its RS-485 interface, is typically used as a slave reader with Apollo AAN-32/100 master controllers or as an OEM reader. Up to 96 readers can be multi-dropped from the AAN-100 controller. RS-485 reader systems are significantly more cost effective because they do not require installation and wiring of any door controllers (reader interfaces) or their associated power supplies and enclosures. Since all door wiring is short and terminates at the reader, the system is more reliable and makes installation and maintenance easier.

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

Proximity, IP66, 60 mm, Bi-colour LED, Blue / Grey, < 100mA, 100 x 100 x 14, 400, -20 ~ +60, 0 ~ 85, vandal resistant

The EVERSWITCH™ line of Piezo Electric Human Machine Interfaces from Baran Advanced Technologies spans from single switches via a variety of keypads and control panels to full-size keyboards. All products are rugged, sealed, tamper and vandal-proof solid-state constructions featuring unprecedented durability and reliability.The EVERSWITCH™ family of products has been successfully tested for 50,000,000 cycles including vibration and impact tests. The non-mechanical, fully electronic patented switch technology allows for perfect adaptation to retro fit as well as new designs and interfaces easily with existing systems. The module concept enables us to produce prototypes in an extremely short time with negligible tooling costs. The ASM is equipped with three electronic devices:Magnetic card readerHID proximity card readerPiezoelectric keypadThe iClass/MIFARE/DESFire can read either iClass credentials (transmitting as Wiegand formatted data as encoded), MIFARE® Standard, Ultralight or DESFire® credentials (transmitting Wiegand data based on the cards serial number in 26-, 32-, 34-, 40- or 56-bit formats).The ASM supports the following operation modes:Swipe a valid Magnetic Card in either direction. The unit will read the contents and send it over thedata wires to the host.Enter a PIN code. The unit will send each digit over the same data wires to the host.Present a valid Proximity card. The unit will read and send the data to the host.

CyberLock AK-01 is an indoor/outdoor, keypad access control reader with LED display.

Equipped with Piezoelectric keypad. 

Proximity reader c/w controller. Available in ABS or stainless steel construction. LPM/INT: retrofit model.

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers Integrated S650 Mullion Interface

IK10 rated for ultimate impact resistance IPX5 rated for external use in all conditions Reads Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire token technology Built-in Bluetooth® wireless technology, allowing the use of smart devices Three Bluetooth® range options – token, touch-to-enter and long range Secure encrypted RS485 communication with Paxton10 controller

Secure 128bit AES Encryption Encrypted from Card to Access Module MIFARE® DESFire® EV1/EV2 Card Format Water & Dust Resistant to IP67 Vandal Resistant (fully potted) Flexible LED Assignment Audible Buzzer (can use as DOTL) Multi-drop RS-485 Reader LAN Individual Reader Heartbeat Monitoring Integriti Auto Reader Discovery OSDP Compatible Compatible With Inner Range Encrypted SIFER Cards Support For Custom Site Codes and Site Specific Encryption User Programmable Cards Offer Great Flexibility For Installers Global Configuration from Integriti Software (including firmware updates) Read-Write Functionality

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

Connects to DG-502 or UCA-3. Stainless steel construction. Controller not included. 1 reader per controller.

Aluminium construction. Comes with controller and PSU.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-M12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) Equipped with keypad The keypad functionality can also be used for a variety of access control features including the option to set a door to long-term open IP55 rating allows both indoor and outdoor installation

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

EXsmart2 is a range of high-performance contactless MIFARE® smart card readers from TDSi. Available with or without a backlit tactile keypad, EXsmart2 is designed to be mounted in a standard electrical back-box making for a neat and simple installation.

A neat solution for exterior or interior Industry leading technical support Five year product guarantee

PCSC Anti-vandal Proximity Reader provides the ultimate solution for users operating in harsh environment, high traffic areas. It can be easily interfaced: Wiegand output model interfaces with all existing Wiegand protocol access control systems. It is sealed in a rugged, weatherised aluminum enclosure and is designed to withstand harsh environments, providing reliable performance while being both vandal and tamper proof.

Flexible Quality Solution to suit any Applications.  Secure Sign-on Facility.  Firmware Upgrade via S/W.  High Protection from Scratch and ESD (Electro Static Discharge).  High Quality Optical Sensor.

Unlimited fingerprint users.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-K12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.

Quick and easy to add to any EliteX or PrismaX Keypad Support for all types of SIFER credentials Multi-format reader compatible with 13.56Mhz cards(CSN Only) Support for Card access control Support for Card & PIN access control Support for Card only keypad login Support for Card & PIN keypad login

Proximity access control reader with 125 kHz frequency Pre-configured for 36 Bit wiegand Tri-colour standard LED indicator Designed to withstand tough rigors of access environment Durable and weather-resistant

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

The PC Series reader is activated via the detection of a miPASS card and/or fingerprint. A card holder's pre-encoded data is stored in the memory chip of a miPASS card, such as a Password/PIN or fingerprint template to authenticate the card holder. Upon validation an encrypted password is sent to the PC for processing by an application with flexible user options, such as securing a drive or folder, creating a secure internet link, logging off or shutting down a PC.

Works with Net2 or Switch2 Fits onto standard UK electrical backboxes Connections for pre-installed cable on the back of the reader Available in black or white A neat solution for interior use on a new build or refitted buildings

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-H12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.