Access Control Readers  (1,529)

The Door Interface Unit (DIU 210) is designed primarily to provide power to a door lock, as well as local power to a CEM reader when a high level of security is required. It has onboard inputs which can be used to monitor conditions such as a fire alarm or activated Break-glass condition. The DIU 210 improves door security, by allowing the installer to locate lock controls on the secure side of a door, with an intelligent CEM reader on the unsecured side. The DIU 210 communicates with an intelligent CEM reader over a single pair RS485 cable. Upon a valid swipe at the card reader, the reader will instruct the DIU (over the RS485 communications channel) to activate the appropriate output to release the lock using a coded data signal (i.e. coded lock). 

Utilising the ACC-4 controller for indoor or outdoor applications. Made of aluminium housing which resists bad weather conditions and vandalism. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 100mA max Outdoor- 100mA max.

The compact optical fingerprint reader from TDSi offers users a versatile biometric solution. Featuring an industry standard Wiegand output it is able to be connected to the majority of access control panels. It also has a large memory capacity allowing the storage of up to 9,000 user templates.

iCLASS SE readers enable a new class of portable identity credentials that can be securely provisioned and safely embedded into both fixed and mobile devices, providing advanced security and performance.

The CyberLock CKV-001 single key cabinet is designed to program and dispense a single CyberKey. It can read most unencrypted 13.56 MHz RFID cards.

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

IDTECK's FGR006SRB is a fingerprint-recognition smart card reader for access control and time & attendance.  Even with the easy-to-install feature, it is designed to provide the highest security available.  One of the notable features is that the FGR006SRB allows you to store your personal bio data on the smart card using the PRG2000B programmer, which eliminates the need for managing database or templates separately.  The fingerprint-stored smart card technology has several remarkable benefits.  Since the biometric data of the card-holder is saved onto the card rather than inside the reader, the concern about the privacy of the card holder, i.e. biometric features, is effectively eliminated.  This technology also allows the system to accommodate an unlimited number of fingerprint users as the decentralised template storage doesn't require large built-in storage memory for fingerprint templates.  IDTECK's wide-ranging product line-up also offers control panels that work in perfect sync with the FGR006SRB and other smart card readers, including the single-door access control panel iCON100SR and the 2 to 4-door access control panel iTDC-SR.High security levelBusiness protectionPrivacy protectionUnlimited fingerprint user expansionKey features:13.56MHz [MIFARE] fingerprint-stored smart card readerRead range: up to 4 inches (10cm)Output formats: 26bit Wiegand (default) / RS232 and ABA Track II (optional)Reads encrypted-IDs of smart cards which can be written by the IDTECK programmer PRG2000BID-only verification for users whose fingerprints cannot be registered  Compatible software: STARWATCH, DUAL PRO I/II, iTDC PRO I/IICompatible controllers: iCON100, iTDC, FINGER007SRB, third-party controllersCompatible readers: SR10B/SR10BE, SR30B, SRK101B

CEM RDR/280/101 is a HID proximity card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/615/201 fingerprint validation card reader is used to enroll cardholders and capture their fingerprint templates onto the AC2000 system. It enables both the validation of the card and the verification of a cardholders biometric fingerprint template.

CEM RDR/280/105 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

The proximity keypad reader has all the electronics contained within the housing eliminating the need for any other expensive control units. Reads both EM4100 and Hitag2 tokens. 2000 users.

BQT Solutions BTBIOX outdoor biometric reader offers security by combining fingerprint scanning technology and encryption for secure user verification and authentication. It is ideal for new site installations or security enhancements of any existing access control systems using Smart Card or ‘Prox’ (125 KHz) card and reader technologies.

PCSC SP632M mini-mullion proximity reader is an attractive, cost effective reader well suited for door mullion or narrow-stile mounting. The SR632M is compatible with industry standard proximity technologies including HID proximity, GE/CASI ProxLite, AWID proximity and LenelProx proximity.

CEM RDR/280/109 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-J12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.

The next generation in reader technology - verastile - enhanced security - reliable.

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

7 array LED indicators (red and green) and beeper. External lED control. External buzzer control. Wall mount (US, EU, asian gang box size).

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

Programming via software with Input for traditional Exit device. Scanner dimensions are 50 x 35mm. Software included.

Use with Switch2 or Net2 Multi-format reader Reads MIFARE® and Net2 tokens Hands free compatible

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

PCSC ATP2M13.56 keypad reader features a sleek, contemporary curved faceplate and is ADA compliant (Braille).  The keypad utilises a one piece reinforced plastic structure, it is water proof and vandal-resistant. It has a single-gang backplate mount design for indoor or outdoor use.It has an audible tone feedback from key presses, as well as visual LED lights.

Secure 128bit AES Encryption Encrypted from Card to Access Module MIFARE® DESFire® EV1/EV2 Card Format Water & Dust Resistant to IP67 Vandal Resistant (fully potted) Flexible LED Assignment Audible Buzzer (can use as DOTL) Multi-drop RS-485 Reader LAN Individual Reader Heartbeat Monitoring Integriti Auto Reader Discovery OSDP Compatible Compatible With Inner Range Encrypted SIFER Cards Support For Custom Site Codes and Site Specific Encryption User Programmable Cards Offer Great Flexibility For Installers Global Configuration from Integriti Software (including firmware updates) Read-Write Functionality

BQT Solutions BIOMIP3X outdoor biometric reader offers security by combining fingerprint scanning technology and encryption for secure user verification and authentication. It is ideal for new site installations or security enhancements of any existing access control systems using Smart Card or ‘Prox’ (125 KHz) card and reader technologies.

The AP-600/700 reader, with its RS-485 interface, is typically used as a slave reader with Apollo AAN-32/100 master controllers or as an OEM reader. Up to 96 readers can be multi-dropped from the AAN-100 controller. RS-485 reader systems are significantly more cost effective because they do not require installation and wiring of any door controllers (reader interfaces) or their associated power supplies and enclosures. Since all door wiring is short and terminates at the reader, the system is more reliable and makes installation and maintenance easier.

125KHz Proximity / PIN and Fingerprint Recognition.  1,000 / 2,000 / 4,000 Fingerprint Users.  ID only Function for Fingerprint Unregistrerable Person.

Proximity, IP66, 60 mm, Bi-colour LED, Blue / Grey, < 100mA, 100 x 100 x 14, 400, -20 ~ +60, 0 ~ 85, vandal resistant

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers Integrated S650 Mullion Interface

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

CyberLock AK-01 is an indoor/outdoor, keypad access control reader with LED display.

Equipped with Piezoelectric keypad. 

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

Industry’s most multifunctional access terminal with integrated biometrics Controller, advanced IP card reader and single biometric solution all in one that meets requirements for three stage identity authentication (card, PIN, and biometric verification) Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprints on the central AC2000 server and on the emerald internal database Fingerprint module gives a high resolution scan with FIPS201 approved biometric algorithm Durable enough for indoor or outdoor usage with an IK06 vandal resistance rating, and IP65 dust and water resistant rating User-friendly 4.3” capacitive LCD touch screen Intuitive Graphical User Interface enhancing user experience at the door Scramble keypad option for Personal Identification Number (PIN) Fully integrated VoIP intercom functionality Ability to run Remote Applications from AC2000 Central Database Server using secure communications Available with onboard PoE+ technology to power the terminal and additional door furniture PIR motion detection Remote upload of new firmware directly to the reader with on-screen indication Maintenance Information / Security Intelligence Point Ability to display live video at the workstation on intercom request, when interfaced with CCTV system (available with AC2000 v6.7 & upwards) Ability to display advertising/ information announcements and personal messages

The EVERSWITCH™ line of Piezo Electric Human Machine Interfaces from Baran Advanced Technologies spans from single switches via a variety of keypads and control panels to full-size keyboards. All products are rugged, sealed, tamper and vandal-proof solid-state constructions featuring unprecedented durability and reliability.The EVERSWITCH™ family of products has been successfully tested for 50,000,000 cycles including vibration and impact tests. The non-mechanical, fully electronic patented switch technology allows for perfect adaptation to retro fit as well as new designs and interfaces easily with existing systems. The module concept enables us to produce prototypes in an extremely short time with negligible tooling costs. The ASM is equipped with three electronic devices:Magnetic card readerHID proximity card readerPiezoelectric keypadThe iClass/MIFARE/DESFire can read either iClass credentials (transmitting as Wiegand formatted data as encoded), MIFARE® Standard, Ultralight or DESFire® credentials (transmitting Wiegand data based on the cards serial number in 26-, 32-, 34-, 40- or 56-bit formats).The ASM supports the following operation modes:Swipe a valid Magnetic Card in either direction. The unit will read the contents and send it over thedata wires to the host.Enter a PIN code. The unit will send each digit over the same data wires to the host.Present a valid Proximity card. The unit will read and send the data to the host.

Proximity reader c/w controller. Available in ABS or stainless steel construction. LPM/INT: retrofit model.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-M12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-K12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.