Access Control Readers  (1,382)

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

Proximity reader c/w controller. Available in ABS or stainless steel construction. LPM/INT: retrofit model.

There are five different models crafted out of the finest materials and manufacturing standards. The above specifications relate to the system combined of the AC-215 controller and AY-M12 reader. Each model has a different footprint to cover almost all of the mounting requirements to international electrical box fixtures, door and walls. AY-x12 readers has Weigand 26-bit output format. The built-in Prox reader can read RFID, 125 KHz ASK type EM cards fro a range of up to 120 mm. All the series readers feature optical tamper which adds system information against wall removal, and the Buzzer adds audible RFID card read. LED control can give system-based information to the end user.

BQT Solutions BIOMIP3X outdoor biometric reader offers security by combining fingerprint scanning technology and encryption for secure user verification and authentication. It is ideal for new site installations or security enhancements of any existing access control systems using Smart Card or ‘Prox’ (125 KHz) card and reader technologies.

PCSC Anti-vandal Proximity Reader provides the ultimate solution for users operating in harsh environment, high traffic areas. It can be easily interfaced: Wiegand output model interfaces with all existing Wiegand protocol access control systems. It is sealed in a rugged, weatherised aluminum enclosure and is designed to withstand harsh environments, providing reliable performance while being both vandal and tamper proof.

Connects to DG-502 or UCA-3. Stainless steel construction. Controller not included. 1 reader per controller.

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

Flexible Quality Solution to suit any Applications.  Secure Sign-on Facility.  Firmware Upgrade via S/W.  High Protection from Scratch and ESD (Electro Static Discharge).  High Quality Optical Sensor.

Unlimited fingerprint users.

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers Integrated S650 Mullion Interface

Proximity access control reader with 125 kHz frequency Pre-configured for 36 Bit wiegand Tri-colour standard LED indicator Designed to withstand tough rigors of access environment Durable and weather-resistant

Works with Net2 or Switch2 Fits onto standard UK electrical backboxes Connections for pre-installed cable on the back of the reader Available in black or white A neat solution for interior use on a new build or refitted buildings

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) IP55 rating allows both indoor and outdoor installation

Magnetic card reader with integrated Piezoelectric keypad.  

The EVERSWITCH™ line of Piezo Electric Human Machine Interfaces from Baran Advanced Technologies spans from single switches via a variety of keypads and control panels to full-size keyboards. All products are rugged, sealed, tamper and vandal-proof solid-state constructions featuring unprecedented durability and reliability.The EVERSWITCH™ family of products has been successfully tested for 50,000,000 cycles including vibration and impact tests. The non-mechanical, fully electronic patented switch technology allows for perfect adaptation to retro fit as well as new designs and interfaces easily with existing systems. The module concept enables us to produce prototypes in an extremely short time with negligible tooling costs. The ASM is equipped with three electronic devices:Magnetic card readerHID proximity card readerPiezoelectric keypadThe iClass/MIFARE/DESFire can read either iClass credentials (transmitting as Wiegand formatted data as encoded), MIFARE® Standard, Ultralight or DESFire® credentials (transmitting Wiegand data based on the cards serial number in 26-, 32-, 34-, 40- or 56-bit formats).The ASM supports the following operation modes:Swipe a valid Magnetic Card in either direction. The unit will read the contents and send it over thedata wires to the host.Enter a PIN code. The unit will send each digit over the same data wires to the host.Present a valid Proximity card. The unit will read and send the data to the host.

CyberLock AK-01 is an indoor/outdoor, keypad access control reader with LED display.

PCSC BIOCL is a contactless samrt card technology, and provides users the level of security that meets their needs: Card and PIN; Card and Fingerprint; Card, PIN, and Fingerprint. The finger pad at the bottom center of the biometric unit offers ease-of-use for either right or left-handed enrollment. It features multi-factor authentication, bioCLASS readers offering the highest level of security. Storing the fingerprint template only on the smart card, users benefit from the increased security, faster throughput, easier system management, lower costs for the biometric reader and reduced concerns over individual privacy. It provides access control verification and fingerprint enrollment all in one reader.

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers Includes S650 Mullion Interface

SR10S is perfectly designed for the places that need high security level.  SR10S gives you high security and easy card registration, which will protect your business firmly.As product users or IDTECK controls the ID number, card IDs are known and are programmed with serial numbers which makes it very convenient to register cards.  This also benefits your business further as other suppliers cannot duplicate the cards or make a compatible reader without data sector and access key information protecting your valuable assets. High security levelConvenient card registrationBusiness protection Key features13.56 Mhz (MIFARE) Contactless IDTECK Credential Smart Card Reader ISC80S Smart Card Read OnlyIDTECK credential ID number reading of smart card reader (ISC80S) programmed by IDTECK (without PRG2000S*)IDTECK credential ID number reading of smart card reader (MIFARE) programmed by IDTECK (with PRG2000S*)34 bit Wiegand / RS232 (Default) with PRG2000S*, various Wiegand & ABA track II output programmableIncluding SR10S Pack (SR10S; 10qty), ISC80S (100qty).  Now IDTECK is holding great deals for customers who purchase the packages online.  You can receive up to 40% off the original price.  You can choose from over 20 various packages such as Single & Multi-door access control, Time & Attendance, Proximity, Long-range card readers. 

With epoxy potted high impact plastic enclosure. For internal/external use. 3 colour LED.

IDTECK's FGR006SRB is a fingerprint-recognition smart card reader for access control and time & attendance.  Even with the easy-to-install feature, it is designed to provide the highest security available.  One of the notable features is that the FGR006SRB allows you to store your personal bio data on the smart card using the PRG2000B programmer, which eliminates the need for managing database or templates separately.  The fingerprint-stored smart card technology has several remarkable benefits.  Since the biometric data of the card-holder is saved onto the card rather than inside the reader, the concern about the privacy of the card holder, i.e. biometric features, is effectively eliminated.  This technology also allows the system to accommodate an unlimited number of fingerprint users as the decentralised template storage doesn't require large built-in storage memory for fingerprint templates.  IDTECK's wide-ranging product line-up also offers control panels that work in perfect sync with the FGR006SRB and other smart card readers, including the single-door access control panel iCON100SR and the 2 to 4-door access control panel iTDC-SR.High security levelBusiness protectionPrivacy protectionUnlimited fingerprint user expansionKey features:13.56MHz [MIFARE] fingerprint-stored smart card readerRead range: up to 4 inches (10cm)Output formats: 26bit Wiegand (default) / RS232 and ABA Track II (optional)Reads encrypted-IDs of smart cards which can be written by the IDTECK programmer PRG2000BID-only verification for users whose fingerprints cannot be registered  Compatible software: STARWATCH, DUAL PRO I/II, iTDC PRO I/IICompatible controllers: iCON100, iTDC, FINGER007SRB, third-party controllersCompatible readers: SR10B/SR10BE, SR30B, SRK101B

The PC Series reader is activated via the detection of a miPASS card. A card holder's pre-encoded data is stored in the memory chip of a miPASS card, such as a Password/PIN to authenticate the card holder. Upon validation an encrypted password is sent to the PC for processing by an application with flexible user options, such as securing a drive or folder, creating a secure internet link, logging off or shutting down a PC.

Support for multiple card technologies including: MIFARE DESFire EV1®,MIFARE DESFire EV2®, MIFARE Plus® and MIFARE Classic®, as well as optional 125 kHz proximity and Bluetooth® wireless technology Field upgradeable software Secure reader authentication and encryption of data communications with HBUS  Upgrade software in situ to keep your system up to date with the latest technology developments. Protection from extreme environmental conditions Environmentally friendly – RoHS compliant and designed for minimal power consumption

CyberLock CKV-20FX key cabinet is designed to program and dispense up to 20 CyberKeys. The CyberKeys are stored in the cabinet unprogrammed until an approved RFID card or PIN is presented. After reading the RFID card, the cabinet communicates with the server and programs a CyberKey with a user’s permissions. The Vault reads most unencrypted 13.56 MHz RFID cards and stores CK-RXD and CK-RXD2 keys. The CyberKey Vault FX also recharges the keys. The front of the Vault has an RFID card reader with an indicator light and a keypad display module.

Use with Switch2 or Net2 Keypad and proximity reader all in one Range up to 100mm with proximity cards Easy mounting Black or white bezels Low profile - less than 16mm deep

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers Includes S650 Mullion Interface

TDSi 5002-0356 is a square access control reader.

The PC Series reader is activated via the detection of a miPASS card and/or fingerprint. A card holder's pre-encoded data is stored in the memory chip of a miPASS card, such as a Password/PIN or fingerprint template to authenticate the card holder. Upon validation an encrypted password is sent to the PC for processing by an application with flexible user options, such as securing a drive or folder, creating a secure internet link, logging off or shutting down a PC.

Equipped with Piezoelectric keypad. 

Suitable for internal and external use.

PCSC PR238 proximity access control reader that features a beeper and multicolor LED which can be host and/or locally controlled. It is suitable for indoor or outdoor use. Its classic series covers available in black, gray, white or beige. It combines multiple configuration options with an attractive, inconspicuous design and economical price.

PCSC PR236 proximity access control reader is housed in a two-piece, weatherproof secure potted enclosure. It is to installed and maintained with the use of replaceable covers. It is available with a Wiegand or Clock-and-Data interface. It is suitable for indoor or outdoor use.

The PC Series reader is activated via the detection of a miPASS card and/or fingerprint. A card holder's pre-encoded data is stored in the memory chip of a miPASS card, such as a Password/PIN or fingerprint template to authenticate the card holder. Upon validation an encrypted password is sent to the PC for processing by an application with flexible user options, such as securing a drive or folder, creating a secure internet link, logging off or shutting down a PC.

Smart Card, PC-based, USB 1.1 peripheral device reader output, LED / Beep, Charcoal, 370 ma, 117 x 76 x 28, 300, 0 ~ 55, 0 ~ 90

Works with Net2 or Switch2 Fits onto standard UK electrical backboxes Connections for pre-installed cable on the back of the reader Available in black or white A neat solution for interior use on a new build or refitted buildings

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) IP55 rating allows both indoor and outdoor installation

125KHz (default) proximity / 13.56MHz (optional) contactless smart card and fingerprint recognition.  1,000 / 2,000 / 4,000 fingerprint users and 10,000 ID users.

EXsmart2 is a range of high-performance contactless MIFARE® smart card readers from TDSi. Available with or without a backlit tactile keypad, EXsmart2 is designed to be mounted in a standard electrical back-box making for a neat and simple installation.

Money saving access controlA greener security solutionWorks in a range of environmentsControls various electrical systemsCompatible with Switch2 and Net2 systemsAs the need to save money and energy has increased over recent years, Paxton Access introduces the Energy saving reader - an access control device that helps ensure minimal energy usage.While energy bills are soaring, everyday bad practises like leaving lights and electrical equipment on unnecessarily means that many businesses are paying for energy they have not properly utilised. The Energy saving reader is a green access control solution that helps to control energy usage. The reader cover is designed to retain a user card; upon entering a room the user places their proximity card into the card slot. The card's presence in the reader toggles a relay that switches on all connected equipment. When the card is removed, the relay toggles back turning all equipment off. This straightforward energy saving concept works because a user has to remove their proximity card from the reader in order to move freely around a site. This way you only use the energy that you need and save on bills.Use the reader to control energy on lighting, air-conditioning, heating and water in office spaces, sports clubs, hotel rooms, conference halls and many other environments.If your business is feeling the pinch, remember that conserving energy is one of the easiest ways to save money. The current need to cut costs makes Paxton Access' Energy saving reader one of the most relevant products in access control.

Quick and easy to add to any EliteX or PrismaX Keypad Support for all types of SIFER credentials Multi-format reader compatible with 13.56Mhz cards(CSN Only) Support for Card access control Support for Card & PIN access control Support for Card only keypad login Support for Card & PIN keypad login