Access Control Readers  (1,572)

PKI Option.  Protected PIN.  LAN Port: Ethernet TCP/IP (10/100).  Serial Ports: RS-232, RS-485.  Wiegand Port: 75 bit with parity standard (user programmable up to 128 bits).  Durable ABS housing.  Reads contact or contactless MIFARE or DESfire smart cards.Biometric Fingerprint Reader:  INCITS 378-2004 Interoperable Minutiae Algorithm Fingerprint Sensor: Silicon (500dpi), 320 x 480 FRR: 0.01% - 0.001% FAR: 0.01% - 0.0001%Contact Smart Card Reader:   ISO 7816Contactless Smart Card Reader:   ISO 14443-A, BIncludes CD with configuration software.

CEM RDR/612/109 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.

AMAG Javelin S880-KP is a proximity card reader with LCD display and keypad designed for integrated access control and intrusion management. The Javelin S880-KP can operate as a standard access control reader or as a fully functional, intelligent alarm keypad with flexible intrusion alarm management capabilities. A single action of presenting a card at a reader can disarm the area behind the door (if authorized to do so) and unlock the door.

CEM RDR/610/108 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

Combined keypad/proximity reader. Comes with controller and PSU.

AMAG  Symmetry 843-CG is a contactless smart card reader with LCD and keypad designed for government agencies adopting federal personal identity verification standards including FIPS 201. In addition to FIPS 201 the Symmetry 843-CG also reads standard NXP® MIFARE® and MIFARE® DESFire, smart cards.

Biometric, Networkable, Wall mount, 25 ~ 50 mm, LED, Silver/Black, Wiegand Interface, 12 VDC, 70 mA, 100 x 226.6 x 60.6, 2 kg, -35 ~ + 65, Vandal & Weather Resistant

AMAG Symmetry S813 reader combines the L-1 Identity Solutions® MV1200™ fingerprint sensor with a NXP MIFARE® / MIFARE® DESFire contactless Smart Card chip to produce a high security front end to a Symmetry access control system. The Symmetry S813 is able to read NXP MIFARE® and MIFARE® DESFire smart cards.

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

The BT950-2 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. The reader is stylish as well as functional with its slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit. It can be mounted directly to a metal door frame with no diverse effect to the reader's operation. Installation is also suited for flush surfaces and mounting on most international standard gang boxes with the addition of backing plates to meet these standards.

CEM RDR/615/205 is a fingerprint validation reader is used to enroll cardholders and capture their fingerprint templates onto the AC2000 system. It enables both the validation of the card and the verification of a cardholders biometric fingerprint template.

In stainless steel construction. LED status indicator. Comes with controller and PSU.

Option for card swipe and pin code Up to 99 card commands Two LEDs for status indicators Tamper Alarm for reader and cable Positive entry buzzer Bidirectional pseudo-random supervised communications Compatible with Symmetry M2150 and EN door controllers

Long Range, Smart Card, Networkable, Wall mount, 100 mm, LED / Beep, Wiegand Interface, 12 V DC, 180 mA, 102 x 142 x 23, 180, -35 ~ +65, 10 ~ 90

The next generation in reader technology - verastile - enhanced security - reliable.

Personal Identity Verification (PIV) Station for FIPS 201 PIV applications.  Includes ScramblePad (with high intensity display for high ambient light environments), INCITS 378 fingerprint reader, ISO 7816 contact smart card reader, ISO 14443-A contactless smart card reader, and LCD display.  Operates standalone or networked (for PKI function).  For verification, PACS enrollment, or door access.  Ethernet & serial (RS-485, RS-232, or Wiegand) ports.  Wall mounted.  Requires12VDC, 800mA or POE.  Reads NIST SP 800-73 compliant End-Point cards.

3 Array LED indicators (red, green and yellow) and beeper. External LED control. External buzzer control. 12 numeric keypads with back lighting. Tamper switch. Wall mount (US, EU, asian gang box size). Reverse polarity protection.

CEM RDR/610/115 MiFare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

The next generation in reader technology - verastile - enhanced security - reliable.

Supports supervised F2F protocol Compatible with Symmetry SR Controller range Multi-technology, multi-frequency Modular design Supports Proximity and Smart Card technologies Comprehensive security features such as tamper monitoring & reporting and four-state supervision of inputs prevent access when system integrity may be suspect

Compact reader with beeper and multi-coloured LED display Plastic-coated for indoor and outdoor mounting Current consumption 20 mA/medium, 75 mA peak 45 cm connection cable (10-wired) Non-contact access control reader for connecting to an access controller with Wiegand interface

Keyscan KR15SE is a mullion mount iCLASS SE smart card reader. It is an open system based on the Trusted Identity Platform (TIP) architecture for advanced applications, mobility and heightened security. It enables a new class of portable identity credentials that can be securely provisioned and safely embedded into both fixed and mobile devices, providing advanced security and performance

Long Range, Proximity, Networkable, Mullion mount, 300 mm, LED / Beep, Grey, Wiegand Interface, 12 V DC, 350 mA, 20.5 x 123 x 144, 370, -35 ~ +65, 10 ~ 90

13.56 MHz (MIFARE) contactless smart card reader. Read the card which is issued by PRG2000 (Smart card read/write programmer)

CEM RDR/610/111 HID Prox card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/615/108 HID iClass card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/615/107 DESFire fingerprint reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

Support for multiple card technologies including: MIFARE DESFire EV1®,MIFARE DESFire EV2®, MIFARE Plus® and MIFARE Classic®, as well as optional 125 kHz proximity and Bluetooth® wireless technology Field upgradeable software Secure reader authentication and encryption of data communications with HBUS  Upgrade software in situ to keep your system up to date with the latest technology developments. Protection from extreme environmental conditions Environmentally friendly – RoHS compliant and designed for minimal power consumption

BQT Solutions BT815-3F flushmount reader offers flexible security options in a low profile design. The reader offers superior security and flexibility through its customisation and encryption options to suit all access control requirements delivering unrivalled security from the reader to the card. The unit features a universal back plate which simplifies mounting on most international standard gang boxes.

Biometric, Standalone / Networkable, Wall mount, Keypad Integrated, LED, Wiegand Interface, 15 ~ 60 V DC, 425 mA, 214.9 x 239.9 x 117.6, 900, 0 ~ 55, 0 ~ 90

The PAC Mifare® mullion reader is a contactless smart card reader with a stylish as well as functional mullion shape allowing easy installation on door architraves where larger readers will not fit. It can also be mounted directly to metal surfaces, such as door frames and turnstiles, with no diverse effect on the reader’s operation, along with back to back mounting without the concerns of false reads from the wrong device. Its key features include: conventional security wiring, visual and audible feedback and interchangeability with any existing PAC readers.

BQT Solutions BT930-3 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. It ideal for new site installations or security upgrades of existing systems migrating from `Prox' (125 KHz) or Mifare card and reader technologies, they offer cost effective enhancement to your current access control system.

The next generation in reader technology - verastile - enhanced security - reliable.

CEM RDR/615/104 dual tech card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/615/105 MiFare card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

Long Range, Wiegand, Standalone, IP66, Wiegand, 2 m mm, LED / Beep, Ivory, Wiegand Interface, 12 V DC, 50 mA, 200 x 200 x 45, 1,360, -35 ~ +65, 10 ~ 90

The Symmetry S844 is a contactless smart card reader with LCD and keypad designed for government agencies adopting federal personal identity verification standards. The S844 reader supports any badge based on FIPS 201 standards such as TWIC, FRAC, PIV or CAC credentials. In addition to FIPS 201 the Symmetry S844 also reads standard NXP® MIFARE® and MIFARE® DESFire smart cards.

The BT900-4 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. The reader is stylish as well as functional with its slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit.

The BT950-2 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. The reader is stylish as well as functional with its slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit. It can be mounted directly to a metal door frame with no diverse effect to the reader's operation. Installation is also suited for flush surfaces and mounting on most international standard gang boxes with the addition of backing plates to meet these standards.

CEM RDR/610/101 is a HID Prox card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.