Access Control Readers  (1,602)

The PAC smart PIN reader is a dual contactless Mifare® card and keypad reader designed specifically for high traffic areas, where medium to high security levels are specified. Its key features include: visual and audible feedback, 12 button illuminated keypad, conventional security warning and user PIN verification. The PAC smart PIN reader is a low profile, robust epoxy filled unit that is built to withstand the harshest of environments and operations. It can be installed in new sites or as an upgraded reader to existing proximity access control systems.

The BT815 Series of readers is a low profile, extremely robust unit and has been engineered to withstand the harshest of environments. The BT815 Series is designed with ease of installation in mind and may be installed on flush surfaces and mounted on most international standard gang boxes with the addition of a backing plate.

Supports 4-Digit to 8-Digit PIN, and Prox credentials.

Supports 4-Digit to 8-Digit PIN, and Prox credentials.

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

The miPASS Bio Series range offers the ultimate security by combining leading edge fingerprint scanning technology and encryption for secure user verification and authentication, limiting exposure through lost or stolen access cards.Card holder's access control data and fingerprint template is encoded directly into the memory chip of the miPASS card, which is secured with encryption keys protecting the card holder's information from being compromised.  The Bio Series reads the cardholder's data from the memory chip of a miPASS card and only transmits to a door controller once a valid finger has been presented. Authentication is performed locally within the Bio Series reader and does not require reference to a centralised database, thus improving performance by minimising verifi cation time and eliminating privacy concerns.  The 1:1 matching method eliminates False Acceptance Rates (F.A.R) normally prone to 1:N (1 to many) systems. Ideal for new site installations or security enhancements of any existing access control systems using Mifare, `Swipe' or `Prox' (125 KHz) card and reader technologies, the Bio Series offers a cost-effective solution for high security requirements. 

Hirsch Verification Station - General Purpose (model RUU-GEN)The market's only high-security, multipurpose biometric edge reader.  The RUU delivers extraordinary versatility:Multipurpose:Verify identity, at card issuance or at ID check station.Control access, door/gate, etc.Enrol biometric template, encode smart cards, and manage users and devices.Populate the access control system with card data.Flexible:  12 mode choices:  finger-only, finger+code, finger+code+contact-card, finger+code+contactless card, etc.  Mode can be changed in seconds via RUU keypad or admin software.2 card interface choices:  contact or contactless; industry standard smart cards (MIFARE, DESfire).  2 implementation choices:  standalone, networked.2 networking choices:  TCP/IP, RS-485.  2 additional port options:  RS-285, Wiegand.3 power choices:  Power-over-Ethernet (PoE), terminal block, 110-220V wall socket.High security:  Four authentication factors:  card, code, fingerprint, PKI certificate check.  RUU (if configured for such) will validate PKI (Public Key Infrastructure) certificate by contacting a Certificate Authority.High-end fingerprint technology:  INCITS 378-2004 interoperable minutiae algorithm.Scrambling numeric keypad.  The unit is IP addressable and can communicate with identity management systems (IDMS), card management systems (CMS), access control systems, and PKI certificate authorities.Winner of U.S. Security Industry Association's Special Achievement Award for outstanding technical innovation.  The Verification Station is part of Hirsch's integrated, end-to-end solution for identity management and regulatory compliance. 

Hands free access control means that the token used to identify a user is read from within their pocket or handbag etc.  This means an authorised user can open a door without having to present their token.  It's particularly useful for gates/barriers, loading doors and where disabled or elderly people require access.  Compatible with Switch2 and Net2 Incredibly easy to installMinimal additional equipment (1 x hands free interface per door & hands free tokens)Retrofit capabilitiesMinimal on-site disturbanceInstalling a Paxton Access hands free system is easy due to the innovative hands free interface and associated technology.  The interface increases read ranges significantly without the hassle of installing door or ground loops as required by other systems.  Because the interface is wired in series between a reader and a control unit it doesn't require its own power supply.Hands free tokens are available in two types: hands free keyfobs and hands free keycards.  Both tokens are fitted with PROXIMITY chips that allow them to be used as close proximity tokens too.  The keycard also has a booster facility that enables automatic gates to be activated from up to 50m away.  Hands free applications:Convenience: unhindered movement is desirable in itself.Car parks: Drivers can activate automatic barriers from the comfort of their car. Regulatory: Conform to regulations as laid out in the Disability Discrimination Act.Security: Doors no longer need to be propped open in factories/warehouses where moving stock around hinders swiping tokens.Hygiene: Reduce the risk of cross contamination in food/beverage production areas, pharmaceutical companies and hospitals etc.

Biometric, Standalone, IP40, Wall mount, 20 ~ 40 mm, LED, Silver & Charcoal, Wiegand Interface, 12 V DC@1/2amp, 370 mA, 140 x 59 x 65, 0 ~ 55, 0 ~ 90

Supports PIN + CARD credentials.

The CEM sPass reader is a low cost, contactless smart card reader with powerful security and encryption features. The sPass reader utilises 3DES (Triple DES) encryption and highly secure DESFire technology. It is designed to be connected to the CEM eDCM 350 encrypted two-door controller, with encrypted RS485 serial communications between the sPass reader and the controller. Combined as one solution, the sPass reader and eDCM 350 controller offer a cost effective solution which combats against the threats of card cloning and Wiegand controller signal cloning. 

Access Touch 4.0 combines an RFID reading, fully capable pc with a responsive touch screen. A powerfully versatile platform, it is designed to fulfill multiple tasks requiring identification, across a wide range of needs and settings. In addition to reading cards and tags, it can be configured to process user data entered on its touch screen. It is fully capable of administering a system itself or forwarding data to a host over either cable or wirelessly. It robustly supports 3rd party GUIs, menus and buttons for mediating user interaction in addition to administering executables. As a result, Access Touch has grown into a platform of choice for hosting payment applications, handling cashless meal payments in cafeterias, time and attendance and info screen/info kiosk roles.

PROXIMITY compact is a single door access control system.  All of the electronics are within the housing of the reader.  Compact systems can be installed to many doors over a site, all using the same cards.  The P series readers are supplied with a choice of black or white fascias that can be fitted in the final stages of installation. The P series readers are available in three sizes as shown in the illustration below.

CEM RDR/612/101 is an exit card reader designed for use as part of an integrated on-line access control system. It is an extension to the master reader, providing a combined total of features at the point of entry. It also features contactless card presentation with optional Personnel Identification Number (PIN) for two stage authentication.

The BT815 Series of readers is a low profile, extremely robust unit and has been engineered to withstand the harshest of environments. The BT815 Series is designed with ease of installation in mind and may be installed on flush surfaces and mounted on most international standard gang boxes with the addition of a backing plate.

Both readers can be custom configurised for output protocol.

The Bio-X Series Outdoor Biometric Readers. A robust, weatherproof and vandal resistant security device designed for all climatic conditionsThe miPASS BIO-X & XK Series readers offers the ultimate security by combining leadingedge fingerprint scanning technology and encryption for secure user verification and authentication, limiting exposure through lost or stolen access cards.Card holder’s access control data and fingerprint template is encoded directly into the memory chip of the miPASS card, which is secured with encryption keys protecting the card holder’s information from beingcompromised.The BIO-X & KX Series reads the cardholder’s data from the memory chip of a miPASS card and only transmits to a door controller once a valid finger has been presented.In addition to the smart card reader + fingerprint verification device, the BIO-XK is fitted with a 4 x 3 keypad and 4 programable function keys.Authentication is performed locally within the BIO-X & XK Series readers and doesn’t require reference to a centralised database.The ‘Match on Card’ method improve performance by minimising verification time and eliminating privacy concerns. The 1:1 ‘match on card’ method eliminates False Acceptance Rates (F.A.R) providing a more accurate result that than to 1:N (1 to many) systems.Ideal for new site installations or security enhancements of any existing access control systems using Mifare, ‘Swipe’ or ‘Prox’ (125 KHz) card and reader technologies, the Bio Series offers a cost effective solution for high security requirements.Both the BIO-X & XK Series readers are available in three different models to cater for all high security requirements large or small, whether your projects are price or functionality driven.

AMAG Javelin S884-KP is a contactless smart card reader with LCD display and keypad designed for integrated access control and intrusion management. Primarily for high security areas, the Javelin S884-KP can operate as a standard access control reader or as a fully functional, intelligent alarm keypad with flexible intrusion alarm management capabilities. A single action of presenting a card at a reader can disarm the area behind the door (if authorized to do so) and unlock the door. The Javelin S884-KP reads NXP MIFARE® and MIFARE® DESFire smart cards.

Supports 4-Digit to 8-Digit PIN credentials.

Mifare CSN/ DESFire CSN/ CEM DESFire User-friendly 4.3 inch capacitive LCD touch screen Intuitive graphical user interface Fully integrated built-in VoIP intercom functionality Scramble keypad option for personal identification number (PIN) Easy to install

Long Range, Proximity, Networkable, IP66, Mullion mount, 100 mm, LED / Beep, Grey, Wiegand Interface, 12 V DC, 180 mA, 23.5 x 76 x 124, 185, -35 ~ +65, 10 ~ 90

Proximity, IP66, Panel mount, 35 mm, multi-colour LEDs, Yellow / Black, < 100mA, 83 x 60 x 16, 100, -20 ~ +60, Indoor / Outdoor weather resistant

Smart Card, Networkable, IP67, Surface mount, RS485, 20 ~ 40 mm, LED / Beep, Charcoal & Ivory, Wiegand Interface, 5 ~ 12 V DC, 170 mA, 90 x 90 x 27, ~25 ~ +65, 0 ~ 90

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Housing material: Aluminium. 

Magstripe card compact reader 1000 user is a single door access control system with all of the electronics within the housing of the reader. Compact 1000 system can be installed to many doors over a site, all using the same cards. Once installed, any magstripe card that is encoded on track 2 in an ABA format can be enrolled onto the reader. The reader is supplied with a satin chrome finish, metal housing.

Use with Switch2 or Net2 Metal construction Suitable for mounting on metal Supplied with security screws and key IPX7 rated - suitable for external use

G-Prox III Readers have the unique ability to read standard G-Prox I (HID®) cards and G-Prox II cards concurrently. Customers that have standardised on HID® technology can now take advantage of the arming station functionality previously available only with G-Prox II readers. G-Prox III readers may be installed with other HID® long-range readers where needed.

Off-line card validation LCD touch screen VoIP intercom functionality Multi date check Time & attendance Easy to install

Following the successful introduction of the combined biometric and smartcard reader Borer are now adding a USB connected smart card reader/writer to their family of Network ready smart card readers. Aesthetically pleasing with a sleek black, desktop wedge housing just 45 mm wide, the Fusion USB proximity card reader connects directly to a PC via the standard USB Interface. It can be used for cardholder enrolment, to write cardholder details including the Cardholder Unique Identity (CHUID), PIN and optionally biometric templates (finger-print or iris). A digital photograph of the cardholder can also be written to the card. The card reader can also be configured as read only to prevent unauthorised data being written to a card. The FUSION USB Card Reader/Writer supports industry standard (ISO 14443A and B - Mifare and DESFire, ISO 7803-4 and ISO 15693) where a card can be used for a variety of applications including access control, attendance recording, travel card and cashless vending. All data written to the card is heavily encrypted using secure 3DES or AES encryption ensuring that the data held on the card can only be accessed by authorised users. Unlike many other solutions where biometric details are held on a central database, Borer holds these templates on the card ensuring that cardholders retain possession of their personal data at all times. Because the cardholders' personal and biometric information are held on a smartcard rather than on a central database or in the reader's memory, the system can support an unlimited number of cardholders and biometric templates. The card reader firmware is field upgradeable so that new firmware can be downloaded to the reader head enabling new applications or generations of smart cards to be supported.

AMAG Symmetry 843-KP-AG is a contactless smart card reader with LCD and keypad designed for government agencies adopting federal personal identity verification standards including FIPS 201. In addition to FIPS 201 the Symmetry 843-KP-AG also reads standard NXP® MIFARE® and MIFARE® DESFire, smart cards.

Smart Card, Networkable, IP67, Surface mount, RS485, 20 ~ 60 mm, LED / Beep, Charcoal & Ivory, Wiegand Interface, 5 ~ 12 V DC, 170 mA, 90 x 90 x 27, ~25 ~ +65, 0 ~ 90

Compatible with a variety of Rosslare's Wiegand 26-Bit Format supporting access controllers: AC-215, AC-115, AC-015 and with many third party access control systems.

Long Range, Proximity, Networkable, Wall mount, Keypad Integrated, 100 mm, LED / Beep, Grey, Wiegand Interface, 12 V DC, 300 mA, 48.5 x 134 x 161.5, 547, -35 ~ +65, 10 ~ 90

BQT Solutions BT817-2 is an access control reader that is low profile, extremely robust unit and has been engineered to withstand the harshest of environments. It is designed for applications where a higher level of security is desired, offering ‘Card Only’, ‘PIN Only’, ‘Card or PIN’ or ‘Card and PIN’ and can output any PINpad format, PIN may also optionally be stored on the user card.

BQT Solutions BT817-4 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. It is designed for applications, where a high-level of security is required by combining smart card identification with a personal identification number (PIN) for secure user authentication and verification.

The DF910 DESFire fingerprint reader offers 3DES encryption with a DESFire card and can be configured to various output protocols.

Single Reader Interface (SRI) module for business access control solutions.  Access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communications are supported.  Lock, unlock, and facility code offline access modes are supported on all readers connected to the SRI.  Each SRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

The universal proximity reader - clock and data reads multiple technologies: Hitag2, EM41000 and PAC.

The PAC Mifare® access reader is contactless smart card reader designed with the practical site installation requirements in mind, such as high traffic areas where a medium security level is specified. The PAC Mifare® Access Reader is a low profile, robust epoxy filled unit that is built to withstand the harshest of environments and operations. It can be installed in new sites or as an upgraded reader to existing proximity access control systems.