Access Control Readers  (1,385)

Compact reader with beeper and multi-coloured LED display Plastic-coated for indoor and outdoor mounting Current consumption 20 mA/medium, 75 mA peak 45 cm connection cable (10-wired) Non-contact access control reader for connecting to an access controller with Wiegand interface

Supports 4-Digit to 8-Digit PIN, and Prox credentials.

For indoor or outdoor applications, and is fully expandable. Aluminium housing which resists bad weather conditions and vandalism. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 18mA Outdoor- 86mA.

For indoor or outdoor applications, and is fully expandable. Aluminium housing which resists bad weather conditions and vandalism. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 18mA Outdoor- 86mA.

Compatible with a variety of Rosslare's Wiegand 26-Bit Format supporting access controllers: AC-215, AC-115, AC-015 and with many third party access control systems.

Keyscan KR90L is a HID iCLASS long range reader - Keyscan format with backward compatibility. It offers security through encryption and mutual authentication. It supports iCLASS 13.56 MHz smart card technology.

Long Range, Proximity, IP67, Clock-and-Data Interface, 8 V DC, 170 mA, 50 x 100 x 15, -35 ~ +66

The CSN9 reader will read any Mifare Smart Card's unique serial number and is available in 32 or 34 bit outputs.

PROXIMITY compact is a single door access control system.  All of the electronics are within the housing of the reader.  Compact systems can be installed to many doors over a site, all using the same cards.  The P series readers are supplied with a choice of black or white fascias that can be fitted in the final stages of installation. The P series readers are available in three sizes as shown in the illustration below.

This unique RF Reader is compatible with Rosslare's UHF Remote Controls in the ISM Band, can receive an ID from a remote control from up to 70 meters range.  Ideal for applications such as guard towers, and long range use.

Hirsch Verification Station - General Purpose (model RUU-GEN)The market's only high-security, multipurpose biometric edge reader.  The RUU delivers extraordinary versatility:Multipurpose:Verify identity, at card issuance or at ID check station.Control access, door/gate, etc.Enrol biometric template, encode smart cards, and manage users and devices.Populate the access control system with card data.Flexible:  12 mode choices:  finger-only, finger+code, finger+code+contact-card, finger+code+contactless card, etc.  Mode can be changed in seconds via RUU keypad or admin software.2 card interface choices:  contact or contactless; industry standard smart cards (MIFARE, DESfire).  2 implementation choices:  standalone, networked.2 networking choices:  TCP/IP, RS-485.  2 additional port options:  RS-285, Wiegand.3 power choices:  Power-over-Ethernet (PoE), terminal block, 110-220V wall socket.High security:  Four authentication factors:  card, code, fingerprint, PKI certificate check.  RUU (if configured for such) will validate PKI (Public Key Infrastructure) certificate by contacting a Certificate Authority.High-end fingerprint technology:  INCITS 378-2004 interoperable minutiae algorithm.Scrambling numeric keypad.  The unit is IP addressable and can communicate with identity management systems (IDMS), card management systems (CMS), access control systems, and PKI certificate authorities.Winner of U.S. Security Industry Association's Special Achievement Award for outstanding technical innovation.  The Verification Station is part of Hirsch's integrated, end-to-end solution for identity management and regulatory compliance. 

Working with the Aritech ACC-4 controller this system is configured with a built in buzzer.

Working with the Aritech ACC-1 controller this system is configured with a buiit in keyboard. Power consumption: Indoor: 20mA Outdoor: 85mA

13.56 MHz (MIFARE) contactless smart card reader.  Read the card which is issued by PRG2000 (Smart card read/write programmer).

Hands free access control means that the token used to identify a user is read from within their pocket or handbag etc.  This means an authorised user can open a door without having to present their token.  It's particularly useful for gates/barriers, loading doors and where disabled or elderly people require access.  Compatible with Switch2 and Net2 Incredibly easy to installMinimal additional equipment (1 x hands free interface per door & hands free tokens)Retrofit capabilitiesMinimal on-site disturbanceInstalling a Paxton Access hands free system is easy due to the innovative hands free interface and associated technology.  The interface increases read ranges significantly without the hassle of installing door or ground loops as required by other systems.  Because the interface is wired in series between a reader and a control unit it doesn't require its own power supply.Hands free tokens are available in two types: hands free keyfobs and hands free keycards.  Both tokens are fitted with PROXIMITY chips that allow them to be used as close proximity tokens too.  The keycard also has a booster facility that enables automatic gates to be activated from up to 50m away.  Hands free applications:Convenience: unhindered movement is desirable in itself.Car parks: Drivers can activate automatic barriers from the comfort of their car. Regulatory: Conform to regulations as laid out in the Disability Discrimination Act.Security: Doors no longer need to be propped open in factories/warehouses where moving stock around hinders swiping tokens.Hygiene: Reduce the risk of cross contamination in food/beverage production areas, pharmaceutical companies and hospitals etc.

The BT900-3 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. The reader is stylish as well as functional with its slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit.

Supports 4-Digit to 8-Digit PIN credentials.

Proximity, IP66, 60 mm read range, Bi-colour LED, Yellow/Black, < 100mA, 100 x 100 x 14, 400, -20 ~ +60, 0 ~ 85, vandal resistant

Mifare Smart Card.  Compatible with a variety of Rosslare's Wiegand 26-Bit Format supporting access controllers: AC-215, AC-115, AC-015 and with many third party access control systems.  Includes mounting template.

Access Touch 4.0 combines an RFID reading, fully capable pc with a responsive touch screen. A powerfully versatile platform, it is designed to fulfill multiple tasks requiring identification, across a wide range of needs and settings. In addition to reading cards and tags, it can be configured to process user data entered on its touch screen. It is fully capable of administering a system itself or forwarding data to a host over either cable or wirelessly. It robustly supports 3rd party GUIs, menus and buttons for mediating user interaction in addition to administering executables. As a result, Access Touch has grown into a platform of choice for hosting payment applications, handling cashless meal payments in cafeterias, time and attendance and info screen/info kiosk roles.

PCSC 2×6 Illuminated Slim Keypad with Proximity Reader can be mounted on a door mullion, measuring at 2″ wide. The indestructible solid state proximity reader offers the ultimate in strength and durability where proximity (125 KHz) is required. This unit provides the ultimate solution for users operating in harsh environments, high traffic areas or when weatherised door units are needed. Audiovisual indication: when a PIN is presented to the door unit, the LED flashes and the buzzer sounds. It is sealed in a rugged, weatherised aluminum enclosure and is designed to withstand harsh environments, providing reliable performance while being both vandal and tamper proof.

Long Range, Smart Card, Networkable, IP66, Mullion mount, 100 mm read range, LED / Beep, Wiegand Interface, 12 V DC, 180 mA, 47 x 115 x 22, 150, -35 ~ +65, 10 ~ 90

The BT815 Series of readers is a low profile, extremely robust unit and has been engineered to withstand the harshest of environments. The BT815 Series is designed with ease of installation in mind and may be installed on flush surfaces and mounted on most international standard gang boxes with the addition of a backing plate.

BQT Solutions BT817-6 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. It is designed for applications, where a high-level of security is required by combining smart card identification with a personal identification number (PIN) for secure user authentication and verification.

P series readers are for use with Switch2 and Net2 systems.  The readers are supplied with a choice of black or white fascias.  Replacement fascias are available to Paxton registered installers free of charge.  P series readers are available in four sizes.

PROXIMITY compact is a single door access control system.  All of the electronics are within the housing of the reader.  Compact systems can be installed to many doors over a site, all using the same cards.  The P series readers are supplied with a choice of black or white fascias that can be fi tted in the fi nal stages of installation. The P series readers are available in three sizes as shown in the illustration below.

Smart Card, Standalone, IP67, Wall mount, Keypad Integrated, Wiegand reader output, 20 ~ 60 mm read range, LED, Charcoal, Wiegand Interface, 12 V DC, 200 mA, 90 x 90 x 27, -25 ~ +65, 0 ~ 90

P series readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white fascias. Replacement fascias are available to Paxton registered installers free of charge. P series readers are available in four sizes.

Mifare CSN/ DESFire CSN/ CEM DESFire User-friendly 4.3 inch capacitive LCD touch screen Intuitive graphical user interface Fully integrated built-in VoIP intercom functionality Scramble keypad option for personal identification number (PIN) Easy to install

Architectural reader inserts available in wood, stone, and glass (embossed with logo).

PCSC BIO-15 biometric access control reader is a patented world-wide and offer flexible and secure RF Rolling Code communications, plus optional Wiegand operation when combined with the Microlatch Wiegand receivers. It can perate such devices as electric locks, garage doors, security & alarm systems and much more. Up to 100 fingerprint units may be stored within the onboard user database.

AMAG Javelin S884-KP is a contactless smart card reader with LCD display and keypad designed for integrated access control and intrusion management. Primarily for high security areas, the Javelin S884-KP can operate as a standard access control reader or as a fully functional, intelligent alarm keypad with flexible intrusion alarm management capabilities. A single action of presenting a card at a reader can disarm the area behind the door (if authorized to do so) and unlock the door. The Javelin S884-KP reads NXP MIFARE® and MIFARE® DESFire smart cards.

Combining a display screen, support for both MIFARE DESFire and mobile transactions, secured behind OSDPv2’s data protocol, makes 8 CD 2.0 MI D Pin a remarkably flexible RFID reader. 8 CD 2.0 MI D Pin’s display simplifies any subsequent user interactive task initiated by secure identification (e.g. payment, after-hour library transactions, etc.). Its combination of display, keypad, function keys menu and robust menu customizability make it a powerfully flexible platform for securely accepting and transmitting users‘ specified responses. This makes 8 CD 2.0 Pin D ideal for meeting a wide range of tasks, user options and inputs, whether they identify by conventional card or mobile phone.

P series readers are for use with Switch2 and Net2 systems.  The readers are supplied with a choice of black or white fascias.  Replacement fascias are available to Paxton registered installers free of charge.  P series readers are available in four sizes.

Ideal for applications that require enhanced security by enforcing both card presentation and PIN entry for secured areas For applications where cards are not issued, users may be assigned a temporary or permanent PIN with designated access privileges Mounts on a single gang electrical box Membrane style keypad surface prevents malfunction due to dust and debris accumulation Keypad surface does not leave finger print smudges

TDSi 5002-5010 is a Mifare programmer allows to control Mifare card security by specifying own sectors and keys to secure site. It can be re-configured to own requirements without any input from TDSi. It also provides a secure method for programming user cards, using a variety of methods with a secure user login function.

Long Range, Proximity, Networkable, IP66, Mullion mount, 100 mm read range, LED / Beep, Grey, Wiegand Interface, 12 V DC, 180 mA, 23.5 x 76 x 124, 185, -35 ~ +65, 10 ~ 90

Smart Card, Standalone, IP40, Wall mount, Keypad Integrated, Wiegand reader output, 20 ~ 60 mm read range, LED, Charcoal, Wiegand Interface, 12 V DC, 250 mA, 136 x 161 x 44, 0 ~ 55, 0 ~ 90

PROXIMITY compact is a single door access control system.  All of the electronics are within the housing of the reader.  Compact systems can be installed to many doors over a site, all using the same cards.  The P series readers are supplied with a choice of black or white fascias that can be fi tted in the fi nal stages of installation. The P series readers are available in three sizes as shown in the illustration below.

A desktop reader the reads the data record of Bosch coded MIFARE classic and DESFire EV1 credentials and provides the information to the respective host application Simplifies the cardholder management and avoids type errors The reader is connected to an USB port of the operator's enrolment workstation It is supported by the host applications Access PE and BIS Access Engine Three LED indicators - Green: Contactless transponder successfully read; Yellow: Device ready; Red: Not successfully read USB interface with 2m cable length for more flexibility Compact and robust housing