Access Control Readers  (1,387)

Smart Card, Standalone, IP67, Surface mount, 20 ~ 60 mm, LED / Beep, Silver & Charcoal, Wiegand Interface, 12 V DC, 140 mA, 140 x 45 x 32, ~25 ~ +65, 0 ~ 90

Long Range, Smart Card, Networkable, IP66, Mullion mount, 100 mm, LED / Beep, Wiegand Interface, 12 V DC, 180 mA, 47 x 115 x 22, 150, -35 ~ +65, 10 ~ 90

PROXIMITY backbox readers are for use with Switch2 and Net2 systems.  The reader fi ts to standard UK electrical backboxes providing a neat installation option for new buildings and refurbishments.  The backbox reader is designed for internal use only.  Available in black or white finish.  Connections for pre-installed cable on the back of the reader.

Use with Switch2 or Net2 Designer reader to match the interior of buildings 3 standard inserts available 3 bezel styles available Drawing provided to allow for custom inserts

PROXIMITY vandal proof reader.  Compatible with Switch2 and Net2.  The reader is installed buried in a wall or doorframe making this suitable in vulnerable areas.

Facial recognition and temperature detection Up to 30,000-face capacity 0.3°C temperature accuracy Desktop and standing mounts Perfect for health management

KeyTag optional.

Long Range, Proximity, Networkable, Wall mount, 100 ~ 140 mm, LED, Gray/Beige, Wiegand Interface, 5 ~ 12 VDC, 70 mA, 114 x 45 x 18, 113, -35 ~ + 65, Weather Resistant

BQT's BIO X & XK Series Biometric readers have been designed to provide accurate identification at amazing speed for the front line of your physical security. These readers are also a powerful tool for gathering Time & Attendance data by combining easy to use software with world leading biometric hardware, increasing the accuracy of staff Time & Attendance at a fraction of the cost of conventional methods. Features include: Bio Series readers use TCP\IP communication which allows for simple integration into existing corporate networks. Wiegand and RS485 communication to communicate with access control systems. The readers can store 16,000 users in each unit (32,000 fingerprint templates). Access Control and Time & Attendance ready, integrated with BioMatch software applications. Readers are available in different models - Fingerprint + Mifare Smart Card, Fingerprint only, Fingerprint + TC/IP. Cards & Fingerprint mode: The Bio-X Series reads the cardholder's data from the memory chip of a miPASS card and only transmits to a door controller once a valid finger has been presented.  In addition to the smart card reader + fingerprint verification device, the BIO-XK is fitted with a 4 x 3 keypad and 4 programmable function keys. Robust and vandal resistant Optical Sensor - less prone to starching and various climate conditions,  in comparison to a capacitance sensor. Available in charcoal and ivory colours. Outdoor/indoor reader - IP65.

Parabit 100-00137 is a flush mount SkimGard reader with tamper switch.

Smart Card, Standalone, IP67, Surface mount, Keypad Integrated, 20 ~ 60 mm, LED / Beep, Charcoal, Wiegand Interface, 12 V DC, 200 mA, 90 x 90 x 27, ~25 ~ +65, 0 ~ 90

Works with Net2 or Switch2 Designer reader to match the interior of buildings 3 standard inserts available 3 bezel styles available Drawing provided to allow for custom inserts

IDTECK Biometric stored smart card technology:  High security with privacy protection Using Mifare cards, the SRB series provide high security with privacy protection.  Fingerprint data will be safely stored inside Mifare cards to ensure privacy of the users with no limitation of user capacity.  It is the perfect solution for areas where high security is required, such as military sites, R&D centres and government buildings. Common13.56 MHz [MIFARE] Contactless Smart Card ReaderRead Range:  Up to 4 inch (10cm)Read Eycrypted ID of Smart Card which is written by PRG2000BCompatible Controller:  iCON100, iTDC, Third Party Controller, FINGER007SRBCompatible Reader:  FR006SRB, FINGER006SRB BenefitsHigh security level:  Data protected with secure access keyBusiness Protection:  Without data sector and access key information, other suppliers can not make compatible readers or cardsPrivacy protection:  Personal bio data is stored in personal card memory instead of in public memory, no need to manage database or templatesUnlimited fingerprint user applicable SR10B(10BE) 26bit Wiegand (default) / RS232 and ABA Track II (optional) Output Format3 Array LED Indicators (Red and Green) and BeeperExternal LED ControlExternal Buzzer ControlEasy to install on Mullion Mount suitableSR10BE : Epoxy potted (Waterproof / IP65, IP66), Warranty (Lifetime)SR30B26bit Wiegand (default) / RS232 and ABA Track II (optional) Output Format7 Array LED Indicators (Red and Green) and BeeperExternal LED ControlExternal Buzzer ControlWall Mount (US, EU, Asian Gang Box Size)SRK101B26bit Wiegand (default), 4 / 8bit Burst for PIN (selectable) RS232 and ABA Track II (optional) Output FormatExternal LED ControlExternal Buzzer Control12 Numeric Keypads with Back LightingTamper SwitchWall Mount (US, EU, Asian Gang Box Size)Reverse Polarity ProtectionOptions: 3ea of External LED ControlSee 13.56 MHz [MIFARE] in action

P series readers are for use with Switch2 and Net2 systems.  The readers are supplied with a choice of black or white fascias.  Replacement fascias are available to Paxton registered installers free of charge.  P series readers are available in four sizes.

Supports PIN + CARD credentials.

Supports 4-Digit to 8-Digit PIN, and Prox credentials.

For indoor or outdoor applications, and is fully expandable. Aluminium housing. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 60mA Outdoor- 150mA.

Mifare CSN/ DESFire CSN/ CEM DESFire User-friendly 4.3 inch capacitive LCD touch screen Intuitive graphical user interface Fully integrated built-in VoIP intercom functionality Scramble keypad option for personal identification number (PIN) Easy to install

EXsmart2 is a range of high-performance contactless MIFARE® smart card readers from TDSi. Available with or without a backlit tactile keypad, EXsmart2 is designed to be mounted in a standard electrical back-box making for a neat and simple installation.

The Symmetry S849 is a contactless smart card reader with LED and keypad designed to read NXP® MIFARE® and MIFARE® DESFire smart cards. MIFARE DESFire operates at a maximum distance of 2” (50mm) and in accordance with the international standard ISO 14443, perfectly meets mid-end segment needs including security and costeffectiveness.

Everswitch ASPS-08-ASPS-26 is an access control reader with proximity.

For indoor or outdoor applications, and is fully expandable. Aluminium housing which resists bad weather conditions and vandalism. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 18mA Outdoor- 86mA.

G-Prox III Readers have the unique ability to read standard G-Prox I (HID®) cards and G-Prox II cards concurrently. Customers that have standardised on HID® technology can now take advantage of the arming station functionality previously available only with G-Prox II readers. G-Prox III readers may be installed with other HID® long-range readers where needed.

Supports 4-Digit to 8-Digit PIN credentials.

For indoor or outdoor applications, and is fully expandable. Aluminium housing. Also has a built in heater to keep the unit ice-free. Current consumption: Indoor- 40mA Outdoor- 95mA.

Card Swipe, Networkable, 12 V DC, 228 x 254 x 76, 0 ~ 40 (32° F to 104° F), 5 ~ 90

Digital scanning of fingerprint. In aluminium housing. Can be interfaced with card or code. Comes with controller and PSU.

CEM RDR/612/119 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.

Hirsch Verification Station - General Purpose (model RUU-GEN)The market's only high-security, multipurpose biometric edge reader.  The RUU delivers extraordinary versatility:Multipurpose:Verify identity, at card issuance or at ID check station.Control access, door/gate, etc.Enrol biometric template, encode smart cards, and manage users and devices.Populate the access control system with card data.Flexible:  12 mode choices:  finger-only, finger+code, finger+code+contact-card, finger+code+contactless card, etc.  Mode can be changed in seconds via RUU keypad or admin software.2 card interface choices:  contact or contactless; industry standard smart cards (MIFARE, DESfire).  2 implementation choices:  standalone, networked.2 networking choices:  TCP/IP, RS-485.  2 additional port options:  RS-285, Wiegand.3 power choices:  Power-over-Ethernet (PoE), terminal block, 110-220V wall socket.High security:  Four authentication factors:  card, code, fingerprint, PKI certificate check.  RUU (if configured for such) will validate PKI (Public Key Infrastructure) certificate by contacting a Certificate Authority.High-end fingerprint technology:  INCITS 378-2004 interoperable minutiae algorithm.Scrambling numeric keypad.  The unit is IP addressable and can communicate with identity management systems (IDMS), card management systems (CMS), access control systems, and PKI certificate authorities.Winner of U.S. Security Industry Association's Special Achievement Award for outstanding technical innovation.  The Verification Station is part of Hirsch's integrated, end-to-end solution for identity management and regulatory compliance. 

External LED Control.  External Buzzer Control.  Indoor / Outdoor Operation.  Solid Epoxy Potted.

Compatible with a variety of Rosslare's Wiegand 26-Bit Format supporting access controllers: AC-215, AC-115, AC-015 and with many third party access control systems.

Long Range, Proximity, IP67, Clock-and-Data Interface, 8 V DC, 170 mA, 50 x 100 x 15, -35 ~ +66

Working with the Aritech ACC-4 controller this system is configured with a built in buzzer.

The Oneprox proximity keypad reader offers outstanding reliability in a tough polycarbonate UV polymer compound, making it ideal for installations in schools, campuses, car park reader posts and other unsupervised public places - both indoors and out. The single-piece Keypad delivers read ranges up to 120mm (4.72 inches) and operates from 10.5 to 18 VDC allowing for flexibility in the use of power supplies.

The Symmetry F2F Reader family is the perfect complement to the Symmetry SR controller range. The F2F card readers are also compatible with legacy access control systems supporting supervised F2F protocol. Supports supervised F2F protocol? Compatible with Symmetry SR Controller range? Multi-technology, multi-frequency? Modular design Supports Proximity and Smart Card technologies

AMAG Symmetry 843-KP-AG is a contactless smart card reader with LCD and keypad designed for government agencies adopting federal personal identity verification standards including FIPS 201. In addition to FIPS 201 the Symmetry 843-KP-AG also reads standard NXP® MIFARE® and MIFARE® DESFire, smart cards.

The CSN9 reader will read any Mifare Smart Card's unique serial number and is available in 32 or 34 bit outputs.

Reader with beeper and multi-coloured LED display Wiegand output for 125 kHz card technology (EM) Indoor and outdoor mounting

Working with the Aritech ACC-1 controller this system is configured with a buiit in keyboard. Power consumption: Indoor: 20mA Outdoor: 85mA

BQT Solutions BT930-6 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. It is Ideal for new site installations or security upgrades of existing systems migrating from `Prox' (125 KHz) or Mifare card and reader technologies, they offer cost effective enhancement to your current access control system.