Access Control Readers  (1,387)

KP readers are a keypad and a proximity reader all in one.  This allows card plus PIN (or code) access control with a single reader.  KP readers are for use with Switch2 and Net2 systems.  Read range up to 100mm with cards and ISO cards.  Replacement bezels are available to Paxton registered installers free of charge.

EPC 2.0 Compact is a small profile, rugged reader ideal for long range access control settings. Its smaller profile allows door frame siting while still permitting transactions out to 13ft (depending on environment, tag type, tag orientation and nearby surfaces). Its high, IP67 moisture and dust-proof protection rating ensures its reliability in low temperatures and inclement conditions.

Low-Cost RFID card/tag reader unit with clock & data interface.

Low-Cost RFID card/tag reader unit with clock & data interface.

CARDLOCK readers are for use with Switch2 and Net2 systems. The reader has a plastic construction and is suitable for external use.

Internal use biometric fingerprint reader Up to 50,000 fingerprints via control board 2-door, turnstile & other integrations Capacitive proximity detection Visual and audible feedback ISO PAD Level 1 compliant when spoof detection is enabled

The AY-E20 is one of a highly sophisticated line of proximity card readers developed by Rosslare, pioneers and market leaders in the access control field.  Ideal for residential and commercial applications, this ultra-slim attractively designed reader compliments any décor.The unit is water resistant but delicate, and is suitable for indoor or outdoor mounting.The AY-E20 is packed with advanced features such as an ultra-bright bi-colour LED indicator, optical back tamper detection, and selectable card transmission formats.  The AY-E20 provides a high level of compatibility and connectivity with host controllers.Main features:Ultra-slim flush-mount design on flat surfaceReading distance: 3.5 cm (1.37 in)Built-In 125 KHz ASK EM proximity card readerInternal buzzer provides audible interface feedbackBi-coloured ultra bright LED indicatorFully potted, waterproof construction for outdoor useMounting template for easier installationApplications:Ideal for commercial and residential environmentsThe reader is suited for architects and designers looking for a stylish access control solution within indoor and outdoor environments.

Low-Cost RFID card/tag reader unit with clock & data interface.

Low-Cost RFID card/tag reader unit with clock & data interface.

1Ghz Linux Based CPU WiFi Touch Active Fingerprint Sensor Web Server Cloud Application

NetworX's NX-1700E cost-effective proximity card reader/door control module expands the capability of NetworX control panels without the need for any additional interface devices. Connect up to 15 readers to any NX series control panel data bus, as far as 2,500 feet away.

Low-Cost RFID card/tag reader unit with clock & data interface.

External LED Control.  External Buzzer Control.  Indoor / Outdoor Operation.  Solid Epoxy Potted.

KP readers are a keypad and a proximity reader all in one.  This allows card plus PIN (or code) access control with a single reader.  KP readers are for use with Switch2 and Net2 systems.  Read range up to 100mm with cards and ISO cards.  Replacement bezels are available to Paxton registered installers free of charge.

CEM TSR/300/105 access terminal with integrated VoIP intercom (MiFare CSN/ DESFireCSN/ CEM DESFire) is designed for use with the CEM AC2000 security management system. With its sleek design and state of the art LCD touch screen, the terminal offers card reader and controller functionality, fully integrated Voice over IP (VoIP) intercom. Utlising a built-in microphone and speaker, the TSR/300/105 provides fully integrated audio intercom functionality at the door, enabling communication between the terminal and a dedicated CEM Intercom workstation.

CEM RDR/610/116 PicoPass card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

The SIFER Card Programming Station is an installer tool featuring a USB connected SIFER programming head, which is used in conjunction with the accompanying SIFER Card Programming Software. This system allows SIFER “User Programmable” cards, known as SIFER-U cards to be encoded with customised site codes and encryption keys by the installer. The programming station is also used to create the SIFER Reader Configuration Card which is necessary to configure SIFER readers to decrypt the sites unique encryption key. SIFER-U cards are available as ISO style cards or FOBS and are readily available from Inner Range distributors. Before leaving the Inner Range factory each SIFER-U cards is pre-programmed, with a standard encryption key, site code and unique card number. This allows SIFER-U cards to be used in the field as they are, or they can be encoded to the installers requirements using the SIFER Programming Station.

Internal use biometric fingerprint reader Up to 50,000 fingerprints via control board 2-door, turnstile & other integrations Capacitive proximity detection Visual and audible feedback ISO PAD Level 1 compliant when spoof detection is enabled

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

TruPortal TP-RDR-200B mini-mullion access readers offers a compact design and basic multi-vendor compatibility. The model communicates with the access control panel via Wiegand data protocol. A tri-color LED indicates the device is powered on or if a valid or invalid credential has been processed.

Rim release type. "Secure" card access system. BellSwipe card access system is complete with card reader (RH10) controller /PSU (CR500) & starter pack of cards (includes function and 16 user cards).

Optica® is a combination 125 kHz proximity reader and keypad. The unique and innovative design keypad has no moving parts to wear out or sabotage and is subtly backlit with fashionable blue LEDs. Optica® is available with either tough ABS plastic covers or as a vandal resistant (VR) version in a contemporary stainless steel housing.

Proximity, Networkable, Wall mount, Keypad Integrated, 100 mm, LED / Beep, Grey, Wiegand Interface, 12 V DC, 150 mA, 31 x 87 x 100, 190, -35 ~ +65, 10 ~ 90

TDSi EXsmart 2K Sector 4 is a high-performance contactless MIFARE smart card reader from TDSi. This high quality unit provides a combined reader and keypad, providing added security if desired by requiring both the card to be presented and the PIN to be entered before access is allowed. The reader is specifically programmed to read the Sector 4 data held in a MIFARE card.

AMAG Symmetry S840-KP reads HID 125KHz proximity cards and is designed for use with the complete multiNODE range of database and door controllers. Typical read range is 5”(120mm) with HID Proxcard II. Unlike Wiegand interface readers, the Symmetry S840-KP\uses secure, bi-directional, pseudo-random supervised communications between the multiNODE controllers and their associated readers.

The LPSP-6820 outputs weigand and RS-232 formats and is compatible with all access control systems.

CARDLOCK readers are for use with Switch2 and Net2 systems. The reader has a metal construction with a satin chrome finish.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

Interlogix TP-RDR-100B mini-mullion access readers offer a compact design and basic multi-vendor compatibility. The model communicates with the access control panel via Wiegand data protocol. A tri-color LED indicates the device is powered on or if a valid or invalid credential has been processed.

Everswitch ATP2P125 ATP2M13.56 is an access control reader with proximity and backlit keypad.

The Symmetry S823 is a contactless smart card reader designed for government agencies adopting federal personal identity verification standards including FIPS 201. The Symmetry S823 reads both NXP MIFARE® and MIFARE® DESFire smart cards in addition to any badge based on FIPS 201 Standards such as TWIC, FRAC, PIV or CAC credentials.

Uses proven digital radio frequency identification technology Includes ABS wall switch plate HID compatible over a wide range of Wiegand protocols Designed for indoor and outdoor environments Unique and versatile design for easy installation

Works with Net2 or Switch2 Designer reader to match the interior of buildings 3 standard inserts available 3 bezel styles available Drawing provided to allow for custom inserts

Vandal resistant biometric reader Up to 50,000 fingerprints via control board Powerful multi-spectral imaging (MSI) Visual and audible feedback IP65-rated ISO PAD Level 1 compliant when spoof detection is enabled

Optica® is a combination 125 kHz proximity reader and keypad. The unique and innovative design keypad has no moving parts to wear out or sabotage and is subtly backlit with fashionable blue LEDs. Optica® is available with either tough ABS plastic covers or as a vandal resistant (VR) version in a contemporary stainless steel housing.

   Compatible with Switch2 and Net2 High quality LCD screenMounts vertically or horizontallyUpload images of your choice via a wireless USB dongleIPX7 ratedIdeal for a range of sites where style and design are paramountMarking the completion of Paxton Access' architectural range of aesthetic readers, the PROXIMITY LCD reader is designed to make a great first impression. The modern LCD screen displays four images of your choice. You can create whatever look you want, whenever you want, in keeping with the design of your specific site.The reader comes pre-loaded with four default images which correspond to a particular action. A different image is shown when the reader is idle, when access is granted, when access is denied and when a card and PIN verification is required.You can customise the reader by uploading the images of your choice wirelessly, using a USB device and a laptop or PC. Use the images on the reader for advertising space, to give commands or directions to end-users when access is granted or denied, or simply to aesthetically please.The LCD reader will look fantastic in modern offices, boutique hotels, conference facilities, design studios, public buildings and more. The reader is even IPX7 rated for external use, so the possibilities are infinite.

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic and DESFire EV1 cards and keyfobs and CSN of ISO14443A credentials Equipped with keypad Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

The panel mount reader is for use with Switch2 and Net2 systems.  It is designed to fi t into door entry panels.  It can also be fi tted into posts to control car park barriers.  It fits behind a reader cut out of industry standard size.  Designed for use in audio/video entry panels.  Fits neatly behind a 40mm square aperture.