Access Control Readers  (1,428)

Parabit 101-00001 is a through the glass mounting case for card reader and exit button with 42-inch polished stainless steel post.

CR11L swipe card reader on mounting base with bezel.  Useful as companion exit reader on same door with MR11LA entrance reader.  7" Pigtail.  Installs in Hirsch mounting boxes.

GB/WPK900 is an Impro weigand plastic keypad reader

The AVAC’s anti-skimming card reader provides protection against skimming at ATM doors by responding when a skimming device has been placed over it. The AVAC will not unlock the ATM entrance door and will generate an alarm after a precon?gured number of card insertion attempts have been made.

CR11L swipe card reader on MRIA MATCH reader interface assembly, which includes mounting base and bezel.  Supports second reader (such as CR11LA) for entry/exit control (MATCH connector with 6" pigtail included).  Installs in Hirsch mounting boxes.  Does not install in MB5, MB8, or MB9.

Read Head Card Types - HID proximity, Indala proximity, MIFARE CSN, DESFire CSN, iCLASS sector (optional) Read Head Card Formats - Two card formats supported per read head; Read head card format is configurable to send card number only, or card number plus facility code. Read Head Battery Life - 10 hours typical with a card read every two seconds Read Head Connectivity - Bluetooth from Android device to read head

125 kHZ Wiegand proximity reader Designed for single gang and mullion mounting Up to a 6" (152.4 mm) non-contact read range with clamshell cards Mounting has horizontal and vertical mounting slots, which allow the reader to be adjusted and leveled

Black, surface mount.  Visual Light reader for use in interior or exterior installations.  Reads multiple symbologies, including concealed bar codes and non-carbon bar codes.  10 ft. cable.  Powered directly by MRIA, MRIB, DS47L or DL1.  It reads bar codes printed on paper, card stock, or plastic.  Not for use with IDC50 cards.

The AIM-2SL utilises the latest technology to provide the ultimate reader interface. The local database provides for storage of up to 20 000 cardholders records, providing complete access control capabilities even if the interface is off-line. Storage of up to 7000 events when off-line insures that historical record of off-line activity will be maintained.

The Apollo AP-Prox reader is an economical proximity reader with universal applications. The AP-Prox works with any of the Apollo reader interface modules and has attractive design with a solid, yet modern appearance. The AP-Prox reader works with Farpointe Data (Pyramid Series) or HID cards with standard 26 bit or proprietary card formats. It can be mullion mounted or mounted on single gang electrical boxes. 

125 kHZ Wiegand proximity reader and security keypad Offers up to a 6" (152.4 mm) non-contact read range with clamshell cards The keypad allows users to enter pin codes for entry, either on their own or in conjunction with a card swipe

White, aluminium post for CR-VBC vehicle bar code reader.  34" x 3.5" dia.  Includes top plate.

Designed for small to medium enterprises requirement of security Integrates RFID, burglar alarm, time attendance and access control functions etc. Features high quality musical buzzer, multiple language display, user friendly interface and powerful communication function suitable for data management in various environments Supports time zone and group access control for high security level Tamper alarm output to connect with alarm equipment outside Alarm card No. can be sent to controller by Wiegand 26 Direct lock control to open door White backlit keypad with 10 numeric keys and 7 function keys RS485, USB device and TCP/IP for network connection Identification method: Card, Password Standard 20000 card users and 200000 records Wall mounted, combine 2-in-1 function for access control and time attendance

Pre-encoded black on black bar code decals, for use with CR-VBC readers.  Adheres to exterior glass surfaces of vehicle.  3.7" x 2.5".

Read Head Card Types - HID proximity or iCLASS/Seos PACS data Read Head Card Formats - Three card formats supported per read head Read Head Connectivity - Direct USB-C connection Regulatory - FCC-United States; CE Mark-Europe; RCM-Australia; IC-Industry Canada; UL Environmental: RoHS, REACH

The Reader connects directly to an available serial port on the computer. The Reader detects the presence of all Wavetrend L-series compatible Active Tags within its read range and continuously streams the data to the serial port. The reader is of a crystal stabilised Superheterodyne RF receiver design.

Read Head Card Types - HID proximity or iCLASS/Seos PACS data Read Head Card Formats - Three card formats supported per read head Read Head Connectivity - Direct USB-C connection Regulatory - FCC-United States; CE Mark-Europe; RCM-Australia; IC-Industry Canada; UL Environmental: RoHS, REACH

Apollo ADA-11/AKM-10 digital door strike control / strike relay module is used in applications where secure control of remote loads such as door strikes are required.

Read Head Card Types - HID proximity, Indala proximity, MIFARE CSN, DESFire CSN, iCLASS sector (optional) Read Head Card Formats - Two card formats supported per read head; Read head card format is configurable to send card number only, or card number plus facility code. Read Head Battery Life - 10 hours typical with a card read every two seconds Read Head Connectivity - Bluetooth from Android device to read head

NetworX NX-1700E is ideal for a range of commerical and residential applications. It also features scheduling and event log.

Dynamic Identification of a HYPER X Tag inside a moving vehicle. Tag identification behind the windshield. Tag identification up to 100 Km/h. reads up to 5 meters. With antenna. Identification checking by protocol. Parallel installation of several readers. Model LML-4034 modular reader reads up to 10m.

The W-RX201 RS485/RS232 Reader detects and decodes RF transmitted signals from the Wavetrend W-series of tags. Interpreted data is converted into electrical information that is passed down the RS485 Reader-net. W-RX201 Readers can be used in stand-alone mode or in a multi-drop asynchronous network where the “Node ID” is automatically assigned. The electrical connection between the host PC and the first reader may be RS232 or RS485. This reader is also available in a proximity or close range model without antenna (Product code:W-RX201-PR). This reader will typically be used in an environment where the tag has to be very close range to the reader.

The AIM-1ELE is a multi-output, elevator interface for use with many reader types, such as: magnetic stripe, proximity, bar code, smart card, biometric, keypad, etc. The AIM-1ELE interfaces with any reader having Wiegand type (Data 1, Data 0) electrical output. The AIM-1ELE allows connection of up to 4 AEL output modules for control of up to 32 floors. 

Readers with 2 Formats.  Fully potted IP-65, 10-wire, contacless 125 KHzReader with Optic Tamper.  Can be programmed to work as Wiegand 26-Bit and Clock & Data formats.  Meets UL-294, ETSI, CE, FCC Standards. Lifetime Warranty.

The 433 MHz Wavetrend whip antenna has been designed for optimal RF receiving performance with the Wavetrend reader range. This antenna attaches to the reader via a BNC(M) connector. This antenna has an omni-directional reception pattern around the vertical axis with null points being at the extreme ends of the stub. The antenna is housed in a rugged waterproof rubber mould that is UV resistant and can be used outdoors.

The Wavetrend Outdoor Wall mount whip antenna has a 3 dBi gain and operates at 433 MHz. It has been designed for optimal RF receiving performance with the Wavetrend reader range. The reception characteristic is Omni-Directional and for optimal performance it should be mounted as high as practically possible and facing the tags in its environment. The antenna is supplied with a 5-meter length of coax cable terminated with a BNC(M) connector. A plastic mould that is UV resistant and can be used outdoors supports the antenna. Applications of this antenna are best suited to where an omni directional RF reception field is required: i.e. Fleet management, Vehicle yard management, Parking control systems, Container monitoring, etc.

The Wavetrend Patch antenna has a zero dBi gain and operates at 433 MHz. It has been designed for optimal RF receiving performance with the Wavetrend reader range. The L-N300 patch antenna is typically used for its unique directional properties. Its reception field is of a hemispheric nature with a larger than 15 dB front to back ratio. The L-AN300 can be mounted on a flat surface at a remote location from the reader with minimal cable loses providing that high quality cable is used. The antenna is housed in a plastic mould that is UV resistant and can be used outdoors. Applications of this antenna are best suited to applications where a directional RF reception field is required, i.e. Access control systems, Vehicle yard management, Parking control systems, Container monitoring, etc.

Supports MIFARE® Classic Master User Card Technician Card Public Pairing Feature Up to 15,000 operations from 2 x AAA batteries Battery override IP55 rated when fitted with gasket

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic cards and keyfobs and CSN of ISO14443A credentials Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

Ability to read the CSN (Card Serial Number) of 13.56Mhz credentials** Secure 128bit AES Encryption Encrypted from Card to Access Module MIFARE® DESFire® EV1/EV2 Card Format Water & Dust Resistant to IP67 Vandal Resistant (fully potted) Flexible LED Assignment Audible Buzzer (can use as DOTL) Multi-drop RS-485 Reader LAN Individual Reader Heartbeat Monitoring Integriti Auto Reader Discovery OSDP Compatible Compatible With Inner Range Encrypted SIFER Cards Support For Custom Site Codes and Site Specific Encryption User Programmable Cards Offer Great Flexibility For Installers Global Configuration from Integriti Software (including firmware updates) Read-Write Functionality

BPT GB/WMK900 is an Impro weigand metal keypad reader

BPT GB/WMR900 is an Impro weigand metal reader

A combination Bluetooth® and NFC™ reader Designed to be mounted to a mullion The reader uses a Wiegand connection Supports the STiD Mobile ID app for Google Android™ and Apple® iOS

The Alpro Hardware Division of IEC Limited has announced the release of the new Alpro PB86 proximity switch. Designed to be used in conjunction with the full range of Alpro electric strikes, electric bolts and general access control products out in the field, this proximity switch offers contactless features offering sterile and hygienic operation. The switch has a proximity distance adjustable from 5-20cms, along with an adjustable relay trigger from 1 to 9 seconds. The switch has easy indication of operation status and can be operated remotely by a small keypad. The switch is suitable for indoor use only. A simple swipe of the hand operates the switch, ensuring no contact is required. A feature especially important with the onset of MRSA and other infectious bacteria currently prevalent in hospitals and other communal areas. Keith Parry Alpro's Divisional Sales Manager commented "In line with our ongoing product development and taking full cognisance of the macro environment, we have brought this new proximity switch to the market, to fulfil market requirements. It is competitively priced and along with Alpro's proven track record of service and reliability will prove to be a winner. Once again reinforcing Alpro's commitment to excellence, making us first choice for locking products".

GB/WPR900 is an Impro weigand plastic reader

Using Anviz BioNANO Algorithm 3000 Fingerprints, 3000 Cards, 100,000 Records With typical fingerprint auto update function Touch activation fingerprints sensor Support PoE power supply for both device and lock RS485, WIFI and TCP/IP communications, Wiegand input and output, Dual relay output Directly controlled door lock, grouping management, time setting Tamper alarm door magnetic signal interface (known the door open and close state) Fingerprint, password and card combination of independence and recognition 2.8" TFT LCD display Standard EM the RFID card reader module, optional Mifare module With cloud access ability Software support for period of time, group management, 16 group access permissions, flexible control 32 entrance guard time real-time monitoring data, easy to learn and easy to use

A combination Bluetooth® and NFC™ reader with security keypad The reader uses a Wiegand connection Supports the STiD Mobile ID app for Google Android™ and Apple® iOS The keypad allows users to enter pin codes for entry, either on their own or in conjunction with a credential

Combines Bluetooth Low Energy (BLE) with conventional card reading capabilities for integrated access control Multi-tech reader (LF, HF, BLE) that provide the widest compatibility with multiple credential types Available with various comms interfaces: Wiegand + OSDP Designed to work across the whole Symmetry product range but also supports standard/open communications protocols for use with other access control systems Works with most Android or Apple smart phones Reads MIFARE, DESFire, EV1 & EV2, LEAF, 125khz proximity cards Configurable reader signal strength, can read Bluetooth BLE credentials from close-up and long range Suitable for indoor or outdoor installation Integrated door pre-held warning buzzer Light bar feedback for card accepted or rejected

AMAG Javelin S874-EX-KP is a smart card reader with keypad designed for extreme weather conditions and environments for integrated access control. The Javelin S874-EX-KP reads NXP MIFARE®, MIFARE® Plus, MIFARE® DESFire and MIFARE® DESFire EV1 smart cards, in addition to PIV, TWIC and FRAC cards. The Javelin S874-EX-KP uses secure, bi-directional, pseudo-random supervised MCLP communications to the multiNODE controller

Is your facility protected... from the edge to the core? Xtralis offers the industry's broadest range of powerful security solutions specifically designed to detect, assess and respond to security breaches in challenging outdoor environments. Watch Xtralis' new perimeter detection videoOur security solutions portfolio includes: - Defence-grade perimeter protection - Passive infrared and video motion detection - Robust video and audio recording and transmission - Remote monitoring software - Energy-efficient video storage - Flexible and scalable IP access control - Integrated security alarm management - Command and control software Because the sooner you know, the safer you are.