Access Control Readers  (1,385)

The Gallagher Mifare USB Encoder is used for encoding mifare cards through USB.

4.3” capacitive touchscreen provides ideal user experience Intuitive icon-driven user interface for both access control and intrusion Encrypted RS-485 communications Easily arm and disarm intrusion zones using card, PIN, or combination Built-in motion sensor saves screen life Menu-driven keypad commands for custom operations Compatible with all iSTAR door controllers Supports Software House RM and smart reader protocols Supports MIFARE, DESFire, EV1 and EV2, HID iCLASS, iCLASS SE, iCLASS Seos, and HID Proximity card technologies Prioritise and enable/disable card technologies to read Future-proof design allows users to add features as they become available Firmware download includes read head firmware updates

All Wiegand Readers available in Multi-card technology (13.56MHz and 125kHz). Providing flexibility in credential model choice. Bluetooth® Low Energy (BLE) allows customers to utilise Pure Mobile application and use their smart phone as their credential. Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader. Metal back plate provides additional security, a simple two piece installation and consistent read range.

The TSG60 provides secure and convenient hands-free positive automatic vehicle identification for a wide range of vehicles, from cars and lorries to trams and trains.  Based on proven ultra-low power microwave technology, TSG60 AVI solutions feature long life semi-active tags, which are readable from a distance of up to eight metres.  The system is simple to install and gives a highly controlled detection zone, allowing multiple readers to be used in the same area which is ideal for identifying multiple lanes of traffic, or allowing for bi-directional detection.

Combines HID Indala ASP® proximity technology with the advanced electronics Provides two supervised inputs and two control point outputs Three high-intensity LEDs (red, amber, and green) and keypad audio feature indicate system conditions Operates in star or multi-drop configuration to support diverse security needs Built-in tamper switch and security screws protect reader electronics Rugged design suitable for interior or exterior environment

The RM Magnetic Stripe reader utilizes flexible and versatile card reader technology.  The readers support high and low coercivity cards encoded on track 2.  The RM Magnetic Stripe reader gives you the option of using cards that have been magnetically encoded for other applications (consult factory for track 1 and 3 applications).  The RM Magnetic Stripe reader is available in standard and mullion styles, and is coated for weather resistance.

The RM Magnetic Stripe reader utilizes flexible and versatile card reader technology.  The readers support high and low coercivity cards encoded on track 2.  The RM Magnetic Stripe reader gives you the option of using cards that have been magnetically encoded for other applications (consult factory for track 1 and 3 applications).  The RM Magnetic Stripe reader is available in standard and mullion styles, and is coated for weather resistance.

Reads HID, Casi Prox-Lite & Deister 125K prox.  The Software House Multi-Format Proximity Readers are compatible with cards from multiple manufacturers which makes them an extremely versatile access control solution.  The proximity readers combine multiple configuration options with an appealing, discreet design and economical price.  Available with or without keypad, the proximity readers are ideal for numerous applications.  The readers' potted electronics make them well suited for both indoor and outdoor applications.

All Wiegand Readers available in Multi-card technology (13.56MHz and 125kHz). Providing flexibility in credential model choice. Bluetooth® Low Energy (BLE) allows customers to utilise Pure Mobile application and use their smart phone as their credential. Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader. Metal back plate provides additional security, a simple two piece installation and consistent read range.

The SALTO XS4 Modular Wall Reader 2.0, in combination with the SALTO XS4 2.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface, such as SALTO ProAccess SPACE to provide your facility with a complete security solution for any kind of installations, even from adverse and harsh environments thanks to the ability to install it in combination with the antivandalic frame. Features: Robust square reader design with green/red and blue LED signal. Compatible with standard European electric boxes using the standard bases. Fully integrated with the SALTO XS4 platform. Virtual network capable through SALTO Virtual Network technology. Acoustic and optical signalling, dual colour green/red to indicate access authorisation. Blue light indicates that the user key update is in progress through SALTO Virtual Network technology. For flush or surface mounting depending on the base (base sold separately). Concealed fixing screw for greater security and improved aesthetics.

TDSi 5002-0456 is a DIGIgarde PLUS mounting plinth

SWH 37-bit format Triple-receiver design allows simultaneous reading of HID® proximity cards, Indala® proximity cards, and contactless smart cards Reads more than 10 different types and formats of proximity cards and contactless smart cards, including most common Indala formats Download new functionality or enhancements for a future-proof solution Encryption and custom keys for secure transmission of data Indoor/outdoor use Built-in tamper switch provides secure installation

The RFID Modular wall reader with keypad is a wall reader that includes a PIN keypad specially designed for outdoor installation on uneven surfaces. The keypad provides increased security as dual identification is needed to access the door. The Wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

ACC 37-bit format Triple-receiver design allows simultaneous reading of HID® proximity cards, Indala® proximity cards, and contactless smart cards Reads more than 10 different types and formats of proximity cards and contactless smart cards, including most common Indala formats Download new functionality or enhancements for a future-proof solution Encryption and custom keys for secure transmission of data Indoor/outdoor use Built-in tamper switch provides secure installation

TDSi, a global leader in access control systems for all sizes of businesses and organisations has launched its exciting new facial recognition reader.The new facial recognition reader is a highly secure, rapid and reliable method of controlling access to sensitive or restricted areas, without the need for traditional security cards or tokens. By doing away with identification tokens, user profiles can be added (or removed) quickly and efficiently with no additional costs once the system is installed. The system can easily be added to existing or planned security and surveillance systems to maximise return on investment.The reader can store up to 500 users and can verify a user in less than one second. It is also highly reliable, operating in virtually all light conditions and has a False Acceptance Rate (FAR) of less than 0.0001%, whilst maintaining stringent access control.TDSi Managing Director, John Davies comments: "Facial Recognition really raises the bar with regards to access control as it provides high levels of security whilst making the process simpler, faster and more convenient for the user. As with many of our products, facial recognition can be particularly useful as a specific part of a fully integrated security network."TDSi's facial recognition reader is perfect for enabling access to sensitive areas where specific users need a flexible and easy-to-use method of entry, such as a laboratory for example. Davies adds, "By adding a further layer of security to the mix an unauthorised person is far less likely to be able to gain access to highly secure areas, even if they have managed to pass through the perimeter security by the theft of a security card."For further details please visit TDSi's homepage. See the album with captions

The RM Indala Proximity Reader combines the convenience and high reliability of Indala ASP® proximity technology with the advanced electronics and stylish packaging of the RM card readers.  A variety of access credentials are supported depending on your needs, including support for photo identification badges and combination technology.

Long Range Readers offer an extremely cost-effective RF long range solution, delivering exceptional read ranges of up to 100 metres. Both receiver channels may be connected to a TDSi access control unit - to control two access points through one, two-button key fob.

SWH 37-bit format Triple-receiver design allows simultaneous reading of HID® proximity cards, Indala® proximity cards, and contactless smart cards Reads more than 10 different types and formats of proximity cards and contactless smart cards, including most common Indala formats Download new functionality or enhancements for a future-proof solution Encryption and custom keys for secure transmission of data Indoor/outdoor use Built-in tamper switch provides secure installation

26-bit format Triple-receiver design allows simultaneous reading of HID® proximity cards, Indala® proximity cards, and contactless smart cards Reads more than 10 different types and formats of proximity cards and contactless smart cards, including most common Indala formats Download new functionality or enhancements for a future-proof solution Encryption and custom keys for secure transmission of data Indoor/outdoor use Built-in tamper switch provides secure installation

TDSi 2920-3010 is a MIFARE custom sector reader configuration card pack can also be configured using a configuration card to allow to choose ector and MIFARE keys to store the access control ID, enhancing site security yet further.

The i-Button SALTO Modular wall reader with external case is specially designed for outdoor installation on uneven surfaces. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

RM Series Personality Module with Keypad Cable Assembly with tamper switch.

4.3” capacitive touchscreen provides ideal user experience Outdoor kit with gaskets Intuitive icon-driven user interface for both access control and intrusion Encrypted RS-485 communications Easily arm and disarm intrusion zones using card, PIN, or combination Built-in motion sensor saves screen life Menu-driven keypad commands for custom operations Compatible with all iSTAR door controllers Supports Software House RM and smart reader protocols Supports MIFARE, DESFire, EV1 and EV2, HID iCLASS, iCLASS SE, iCLASS Seos, and HID Proximity card technologies Prioritise and enable/disable card technologies to read Future-proof design allows users to add features as they become available Firmware download includes read head firmware updates

Connect in series with the PC keyboard and allow the card number to be read by the reader and automatically entered into the appropriate field within the eXguard software. 

Desktop USB Fingerprint Enrolment Scanner

The LCD is an optional backlit text display which is available with any RM card reader.  It provides card holders with visual feedback and prompts, such as "Access Granted" or "Enter PIN".  The display consists of two lines of 16 characters and can be configured to display custom messages.  The LCD is designed to be used with readers that have a keypad and is not recommended for use in harsh temperatures.

Relay lock-release activation. Programmable from 01 to 99 seconds. Acoustic and visual status data. Reader with 2 status LEDs and a 7 segment 4 digit display (helps with programming and status data). Manual programming using the infrared remote control included or via PC software (card activation/deactivation of fingerprints). Special Functions: free fingerprint button (trades) and unblock fingerprint (lock-release always activated). Door sensor and exit button control. Auxiliary Relay for other Functions. Door alarm and forced door, panic alarm or intruder alarm (incorrect fingerprint).

PALMgarde Palm Vein Reader Wall Bracket

The RM Indala Proximity Reader combines the convenience and high reliability of Indala ASP® proximity technology with the advanced electronics and stylish packaging of the RM card readers.  A variety of access credentials are supported depending on your needs, including support for photo identification badges and combination technology.

Combines HID Indala ASP® proximity technology with the advanced electronics Provides two supervised inputs and two control point outputs Three high-intensity LEDs (red, amber, and green) indicate system conditions Operates in star or multi-drop configuration to support diverse security needs Built-in tamper switch and security screws protect reader electronics Rugged design suitable for interior or exterior environment

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

Reads both proximity and smart cards, providing an ideal solution for customers looking to transition from proximity to a more secure smart card solution Offers enhanced security through MIFARE® and DESFire®, EV1/EV2 encryption, and is compatible with nearly all major card formats in the industry, including ISO 14443 A/B, ISO 15693, MIFARE, DESFire, FIPS 201 PIV FASC-N read, and most 125 KHz formats (HID and CASI® ProxLite) Provides two supervised inputs and two control point outputs Three high-intensity LEDs (red, amber, and green) indicate system conditions Operates in star or multi-drop configuration to support diverse security needs Built-in tamper switch and security screws protect reader electronics Rugged design suitable for interior or exterior environment

The Johnson Controls PowerNet IP Reader is a panel-free reader with direct connectivity to the data network, with Power over Ethernet (PoE) built-in. The reader is configured and monitored using the P2000 security management system to provide authorised security personnel with real-time access control and emergency response.

SALTO offers a broad range of 13,56Mhz RFID Contact less Smart Card wall reader. It reads encrypted data from the carriers and then communicate it to the control units. It also allows for updating of the carriers via the SALTO Virtual Network technology. Compatible with ISO 14.443A, ISO 14.443B and ISO 15.693 (Vicinity) and covering a wide range of mainstream RFID brands such as Mifare, DESfire, Legic, HID iClass and Picopass. SALTO is compatible with NFC (Near Field Communication) technology which allows NFC enabled cell phones to act as contactless data carriers to open and control SALTO access controlled doors.

The i-Button SALTO Modular wall reader with key pad includes a PIN keypad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.  

Combines Bluetooth Low Energy (BLE) with conventional card reading capabilities for integrated access control Multi-tech reader (LF, HF, BLE) that provide the widest compatibility with multiple credential types Available with various comms interfaces: OSDP + Wiegand Designed to work across the whole Symmetry product range but also supports standard/open communications protocols for use with other access control systems Works with most Android or Apple smart phones Reads MIFARE, DESFire, EV1 & EV2, LEAF, 125khz proximity cards Configurable reader signal strength, can read Bluetooth BLE credentials from close-up and long range Suitable for indoor or outdoor installation Integrated door pre-held warning buzzer Light bar feedback for card accepted or rejected Optional PIN for higher security

TruPortal TP-RDR-LRN is a dual frequency enrollment reader. It connects to PC via USB interface.

Combines Bluetooth Low Energy (BLE) with conventional card reading capabilities for integrated access control Multi-tech reader (LF, HF, BLE) that provide the widest compatibility with multiple credential types Available with various comms interfaces: 20mA (MCLP) Designed to work across the whole Symmetry product range but also supports standard/open communications protocols for use with other access control systems Works with most Android or Apple smart phones Reads MIFARE, DESFire, EV1 & EV2, LEAF, 125khz proximity cards Configurable reader signal strength, can read Bluetooth BLE credentials from close-up and long range Suitable for indoor or outdoor installation Integrated door pre-held warning buzzer Light bar feedback for card accepted or rejected

The SALTO contactless slim wall reader for flush mounting, has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader. The wall reader reads data from the carrier and then communicates it to the control unit. They also allow for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in heater making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

IXP220 software and tag/card registration reader for addition and deletion of tagholders.The software is so simple that there is no need for a manual. The pack also includes a host interface which acts like a dongle and connects the registration reader via USB directly to your PC.