Access Control Readers  (1,529)

The RM Indala Proximity Reader combines the convenience and high reliability of Indala ASP® proximity technology with the advanced electronics and stylish packaging of the RM card readers.  A variety of access credentials are supported depending on your needs, including support for photo identification badges and combination technology.

Relay lock-release activation. Programmable from 01 to 99 seconds. Acoustic and visual status data. Reader with 2 status LEDs and a 7 segment 4 digit display (helps with programming and status data). Manual programming using the infrared remote control included or via PC software (card activation/deactivation of fingerprints). Special Functions: free fingerprint button (trades) and unblock fingerprint (lock-release always activated). Door sensor and exit button control. Auxiliary Relay for other Functions. Door alarm and forced door, panic alarm or intruder alarm (incorrect fingerprint).

The LCD is an optional backlit text display which is available with any RM card reader.  It provides card holders with visual feedback and prompts, such as "Access Granted" or "Enter PIN".  The display consists of two lines of 16 characters and can be configured to display custom messages.  The LCD is designed to be used with readers that have a keypad and is not recommended for use in harsh temperatures.

The i-Button SALTO Modular wall reader with key pad includes a PIN keypad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.  

MATCH reader interface board.  Accepts up to 2 readers & 2 ScramblePads for dual technology entry & exit control of 1 door.  Use with CCM 6.4 (or higher) & CR readers (see DIGI*TRAC Deisgn and Installation Guide for compatible readers).  2 MATCH connectors with 6" pigtails.  Provides 5VDC @ 250mA reader power.  Mounting plate.  UL Listed.  CE.

Combines HID Indala ASP® proximity technology with the advanced electronics Provides two supervised inputs and two control point outputs Three high-intensity LEDs (red, amber, and green) indicate system conditions Operates in star or multi-drop configuration to support diverse security needs Built-in tamper switch and security screws protect reader electronics Rugged design suitable for interior or exterior environment

Reads both proximity and smart cards, providing an ideal solution for customers looking to transition from proximity to a more secure smart card solution Offers enhanced security through MIFARE® and DESFire®, EV1/EV2 encryption, and is compatible with nearly all major card formats in the industry, including ISO 14443 A/B, ISO 15693, MIFARE, DESFire, FIPS 201 PIV FASC-N read, and most 125 KHz formats (HID and CASI® ProxLite) Provides two supervised inputs and two control point outputs Three high-intensity LEDs (red, amber, and green) indicate system conditions Operates in star or multi-drop configuration to support diverse security needs Built-in tamper switch and security screws protect reader electronics Rugged design suitable for interior or exterior environment

SALTO offers a broad range of 13,56Mhz RFID Contact less Smart Card wall reader. It reads encrypted data from the carriers and then communicate it to the control units. It also allows for updating of the carriers via the SALTO Virtual Network technology. Compatible with ISO 14.443A, ISO 14.443B and ISO 15.693 (Vicinity) and covering a wide range of mainstream RFID brands such as Mifare, DESfire, Legic, HID iClass and Picopass. SALTO is compatible with NFC (Near Field Communication) technology which allows NFC enabled cell phones to act as contactless data carriers to open and control SALTO access controlled doors.

Superior environmental protectionThe robust construction of Gallagher’s T15 Reader makes it perfect for deployment in environmentally challenging locations. The T15 delivers outstanding all-weather performance, making it the easy choice for outdoor use. Slim form factorAvailable in standard and multi-technology variants, the T15 sits easily on a mullion, and delivers reliable card reading performance when mounted on a variety of surfaces (including metal).

The i-Button SALTO Modular wall reader with key pad includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

RM Series Personality Module with Keypad Cable Assembly with tamper switch.

The i-Button SALTO Modular wall reader with external case is specially designed for outdoor installation on uneven surfaces. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

Designed to perfectly match AXIS A1001 Network Door Controller Support for most smart card formats 2 LED symbols give clearly visible feedback Indoor and outdoor ready IP65 classified Powered by Assa Abloy

The RFID Modular wall reader with keypad is a wall reader that includes a PIN keypad specially designed for outdoor installation on uneven surfaces. The keypad provides increased security as dual identification is needed to access the door. The Wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

IXP220 software and tag/card registration reader for addition and deletion of tagholders.The software is so simple that there is no need for a manual. The pack also includes a host interface which acts like a dongle and connects the registration reader via USB directly to your PC.

Dual Reader Interface (DRI) module for business access control solutions.  Most access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communications are supported.  Lock, unlock, and facility code offline access modes are supported on all readers connected to the DRI.  Each DRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

TruPortal TP-CTX6 is a 6 board expansion enclosure with lock and keys. Power supply is not included and installs upto 6 TP-ADD. It is a standoff to mount boards and tamper switch.

The Gallagher Mifare USB Encoder is used for encoding mifare cards through USB.

TruPortal TP-RDR-LRN is a dual frequency enrollment reader. It connects to PC via USB interface.

The new AY-K25 and AY-H25 Readers have been designed to receive Mifare® Contactless Smartcard identification information with any standard access control system.Being highly adaptable and easily configurable, they are ideal for global companies seeking a uniform reader compatible with all international mounting standards.  Featuring seven programmable output formats and a maximum range of seven centimetres, they easily comply with most system demands.Sealed and fully potted in polycarbonate UV plastic the readers are highly suitable for all outdoor weather conditions.  Their tough structure combined with Rosslare's protection technology makes them highly tamper-resistant.The Readers are capable of reading card tags in the ISO-14443A Mifare® format.  Mifare® is a registered trademark of Phillips Corp.

TruPortal TP-CTX is a 2 board expansion enclosure with lock and keys. Power supply is not included and installs upto 2 TP-ADD. It is a standoff to mount boards and tamper switch.

The i-Button slim wall reader for flush mounting, has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader. The wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

BPT GB/WKM900 is an Impro weigand mullion keypad reader

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

Biometric

BPT GB/IBT910 is an Impro B-SHO fingerprint reader

Biometric, Keypad Integrated

BPT GB/JDUAL is an Impro Biometrics/Mifare dual function reader

Combines Bluetooth Low Energy (BLE) with conventional card reading capabilities for integrated access control Multi-tech reader (LF, HF, BLE) that provide the widest compatibility with multiple credential types Available with various comms interfaces: 20mA (MCLP) Designed to work across the whole Symmetry product range but also supports standard/open communications protocols for use with other access control systems Works with most Android or Apple smart phones Reads MIFARE, DESFire, EV1 & EV2, LEAF, 125khz proximity cards Configurable reader signal strength, can read Bluetooth BLE credentials from close-up and long range Suitable for indoor or outdoor installation Integrated door pre-held warning buzzer Light bar feedback for card accepted or rejected

BPT GB/SMSO300 is an IMPRO SAGEM biometrics enrolment reader

GB/SMA100 is a Sagem Biometrics Reader and supports 500 users with 2 templates each and connects to a TCP/IP network.

GB/SMA500 is a Sagem Biometrics Reader. Supports 3,000 users with 2 templates each and connects to a TCP/IP network.

BPT GB/IBT902 is an Impro B-SHO enrollment reader

GB/ISL903 Impro Touch - Sagem biometric integration providing a single, seamless database for enrolling the fingerprint and access control permissions

The contactless SALTO Modular wall reader with key pad is a wall reader that includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. The wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

Created for the Hotel environment, the SALTO desktop reader is designed to read data from the R&W carriers and send it to an external device, usually a Point of Sale terminal. This can be useful in a PMS environment and works with industry standard protocol. Main features and benefits: Configuration by dip switches to control data to be read and the interface with the external device. The interface with the external device can be RS232, OMRON and WIEGAND. Current required: 12v DC source (included). Connection to the external device: 9 pin D-type female connector (to be connected to serial port). Data read by the desktop reader: ROM CODE, TRACKS ON KEY, WIEGAND CODE.

The SALTO in room energy saving device (ESD) helps to save up to 65%* of a hotel room or student dorms electricity consumption and unlike standard (magnetic stripe) energy savers, only authorised SALTO key cards will switch on the lights. Any other card (frequent flyer, business card etc) or other SALTO cards belonging to other rooms, will not activate the lights. It is also available in a connected on-line version, which as well as energy saving indicates in real time the presence of guests or staff in a room, logging the information directly into the hotel PC. When a guest enters the room and inserts their card into the ESD it switches on all electrical equipment. When staff enter the room for cleaning or maintenance, the ESD recognises their staff card and switches on only the electrical equipment they need to do their work.

DSC MAXSYS_Readers supports a wide range of 26-bit Weigand readers: Polaris™, ioProx™, Shadowprox™, HID and Kantech XSF Technologies.

The WRM6000 is the SALTO Contact Smart Card wall reader. It reads encrypted data from the carriers and then communicates it to the control units. It also allows for updating of the carriers via the SALTO Virtual Network technology. The WRM6000 features a built-in heater making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

Control unit for 1 door and 20 coded memory. Individual programming and total delete facility. 2nd reader option. Serial communication between reader and CPU. 2 locks time setting. Works with VX KEY -unique coded key with 48 Bit serial number.