Access Control Readers  (1,541)

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Soft-touch capacitive keypad for dual authentication of card and associated PIN number Context sensitive function keys for selection and navigation Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology Large reader database for off-line card verification and alarms Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Weather-proof casing: IP65 rated & IK06 impact rating

The S620 Magnetic Stripe readers have been designed for use with the Symmetry M-2150 and EN door controllers. Unlike Wiegand interface readers, the Symmetry S600 Magnetic Stripe readers use secure, bi-directional, Pseudo-Random supervised communications between the multiNODE controllers and their associated readers.

Small and compact design. Beeper and LED are not embedded in the module. Solid epoxy potted. Lifetime warranty. 

Complies with FCC part 15, UL 294, 1076-Listing and CE-Mark pending.  

CEM RDR/304/001 proximity portable card reader is a lightweight and rugged hand-held card reading device for use with the CEM AC2000 system v6.3 software & upwards. It can be used for ID card validation at remote sites or temporary entrances which have no power, and can also be used as a mobile device for random checks within pre-defined zones. Up to 200,000 card ID’s can be held in the reader’s database for differentiation between authorised and unauthorised personnel and up to 8,000 offline card swipe transactions can also be stored for on-line transmission to the AC2000 system via built-in 802.11g WiFi connection or USB cabled connection.

Reads Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire token technology Quick and straightforward user registration Simple USB connection No software install required, the desktop reader works out-of-the-box

Keyscan HID-6005B is a HID PROX POINT + 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

Keyscan HID-5455 is a HID PROX PRO 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

Authenticate cardholder details anywhere, even if mains power is unavailable Encrypted storage of up to 200,000 cardholders on-board Full colour 3.5” TFT touchscreen LifeSupport hot swappable batteries

Keyscan HID-5365 is a HID MINI PROX 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

Borer Data Systems intelligent ‘FUSION Smartcard Reader' is a door entry solution for use in networked access control applications.Aesthetically pleasing with a sleek black housing and just 45mm wide, the FUSION Smartcard Reader has full card validation and decision making capabilities at the point of entry, eliminating the need for a separate control panel, wall box and mains power supply at each door bringing significant cost savings at the time of installation and over the lifetime of the product.One of the most impressive features is that Firmware updates can be automatically downloaded directly to the reader head over the LAN enabling new generations of smart cards to be supported when they are introduced (e.g. move from Mifare to DESFire).The FUSION Smartcard reader beings support for industry standard (ISO 14443A and B - Mifare and DESfire, ISO 15693) technologies where a single card can be used for a range of applications including: access control, attendance recording banking, travel card and cashless vending.Key Features: Complete Single Door Access Control Solution in one reader headLarge Database with a capacity of up to 120,000 card holders/transactions at the reader enabling access decisions to be made at the reader head. Secure Database, all cardholder details are heavily encrypted to prevent manipulation or misuse of dataFuture Proof - Firmware updates are automatically downloaded directly to the reader head over the LAN enabling new smart card standards to be supported when they are introduced.User Programmable open format Mifare cards which, unlike systems that use proprietary and exclusive formats, eliminates single supplier dependence and benefits the user with lower cost for replacement cardsEliminates the Need for a separate control panel, wall box and power supply reducing component count, bespoke cabling requirements and installation complexity and associated costs Two bicolour LEDs and polyphonic sounder gives clear user feedback when a card is presentedWorks with Borer Midspan Bridge technology to deliver power and data to the door over a single CAT5e/6 cableTCP/IP Network Connection via Borer Bridge facilitates direct connectivity to the access central management system and database ‘Power over Ethernet' Technology manages energy supply to the lock, extends the lock life and reduce the amount of energy consumed at the door by up to 80% ‘Plug and Play' makes for faster installation & commissioningEnergy Savings - Save from £20 per door per annum on energy costs. 

CEM RDR/304/006 portable card reader is a lightweight and rugged hand-held card reading device for use with the CEM AC2000 system v6.3 software & upwards. It can be used for ID card validation at remote sites or temporary entrances which have no power, and can also be used as a mobile device for random checks within pre-defined zones. Up to 200,000 card ID’s can be held in the reader’s database for differentiation between authorised and unauthorised personnel and up to 8,000 offline card swipe transactions can also be stored for on-line transmission to the AC2000 system via built-in 802.11g WiFi connection or USB cabled connection.

The Everswitch family of indestructible access control products consists of single-door, stand-alone self contained access control keypads. All Everswitch access control products utilise the BARAN innovative Piezo technology. The Everswitch keypad's rugged, sealed, non-moving one-piece construction sets it apart from any alternative.Key features include:Vandal proof Tamper proofWeather proof (-40°C ~ 125° C)Water & dust proof (IP68, 100% humidity)

IPX7 rated - suitable for external use A simple solution for vulnerable areas A lost card can be deleted in seconds Control over access by token colour Up to 10,000 users on one site All cards are immediately valid

Keyscan HID-5395 is a HID SLIM LINE II PROX 125kHz proximity reader. Sealed in a rugged, weatherised polycarbonate enclosure designed to withstand harsh environments, it provides reliable performance and a high degree of vandal resistance for both indoor and outdoor applications.

PCSC Single Door Module (SDM) controller has been re-engineered to support PCSC’s patented Fault Tolerant Architecture. It utilises LiNC-NXG and LiNC-PLUS host application systems, the SDM’s provide more features and capabilities with the highest system reliability. It is based on a “single cable” technology solution, allowing you to design door systems with a PoE powered cable. The SDMs are available in a controller only or with an integrated reader.

Universal Wiegand support. 241 g in weight. IP64 protection. Operating freuencey: 13.56 MHz.

The Door Interface Unit (DIU 210) is designed primarily to provide power to a door lock, as well as local power to a CEM reader when a high level of security is required. It has onboard inputs which can be used to monitor conditions such as a fire alarm or activated Break-glass condition. The DIU 210 improves door security, by allowing the installer to locate lock controls on the secure side of a door, with an intelligent CEM reader on the unsecured side. The DIU 210 communicates with an intelligent CEM reader over a single pair RS485 cable. Upon a valid swipe at the card reader, the reader will instruct the DIU (over the RS485 communications channel) to activate the appropriate output to release the lock using a coded data signal (i.e. coded lock).     

Universal Wiegand support. 136 g in weight. IP64 protection. Operating freuencey: 13.56 MHz.

High security mobile solution in an all-in-one S3060 handheld device. Cardholder Details – Stored cardholder photographs are displayed on the reader along with Name, and Date of Birth, allowing for additional visual verification. Mustering – The S3060 portable readers contains the current system muster state, allowing for usage in a muster situation where the muster count is decremented as each person swipes their card. (Mustering is used, for example in the evacuation of cardholders to a safe location in the event of an emergency). A report is provided which shows the details of cardholders who still need to present their card. Roaming - The S3060 portable readers can be temporarily assigned a different pre-defined reader address. This allows a single portable reader to be used across multiple card verification zones. Occupancy Mode – This allows a cardholder head count in a defined area preventing card sharing. Occupancy mode provides the ability to do spot checks on a pre-defined group of people in a defined area, e.g. a bus or plane. Increased Storage – The S3060 portable reader holds over 500,000 cardholder records and up to 50,000 offline transactions.

Protection from scratch and ESD (Electro static discharge).  Optical sensor.  Dual tamper switches.

ASPSL- 08-ASPSL-26 is an illuminated proximity reader with keypad.

The Inner Range OSDP <> Wiegand converter is a small inline device which can be used in junction with card readers in order to convert OSDP protocol to Wiegand or Wiegand protocol to OSDP. The device can be configured to provide the following functions: Convert data from a SIFER OSDP reader to Wiegand data for connection to a standard Wiegand reader input. Convert data from any OSDP reader to Wiegand data for connection to a standard Wiegand reader input. Convert data from a Wiegand reader to Inner Range SIFER data for connection to the RS-485 reader input on Integriti or Inception products.

PCSC Dual Door Module (DDM) controllers is an integrated part of the Fault Tolerant Architecture, providing the highest system reliability in our industry. It has the ability to automatically route system request to another controller during controller failures or communication failures, ensuring the highest level of security with no degradation. It provides door monitoring and control for up to 2 doors.

The CyberKey Vault WR module is a very secure, ruggedised, outdoor vault that stores an un-programmed CyberKey. When approved credentials are presented, the CyberKey is programmed and can then be removed from the Vault.

Supports any phone with caller ID enabled Quad band GSM No token requirement Attach to any Net2 control unit Use with any Paxton clock & data reader

When used in conjunction with the EXgarde access management or the MIFARE Card Programming Station software, this reader allows you to program information to a MIFARE card.

The Door & IO Module is used for controlling a door strike. In addition, it offers input and output lines compatible with indicators, alarms, door sensors, request-to-exit devices, and compatible Wiegand input devices.

AT1G634-200 is an access control for single door.

GB/ISL904 is a multi-site licence, which can control up to 1,000 sites from the single software database.

Morse’s SmartKey® Reader lets you manage keys for your Touch system more quickly and efficiently than ever before. The electronic key reader is designed to work seamlessly with the TrueTouch client software. Add a new key to your existing system – right from your computer – identify an existing key or remove it from the system entirely. Better yet, the TrueTouch interface simplifies the key additions and deletion process, saving you time and reducing input errors. The SmartKey Reader works with KeyWatcher Touch and KeyBank Touch 1.7 and higher. Features: Efficiently add/remove system keys at computer Connects via USB Easily identify a SmartKey Works with KeyWatcher Touch and KeyBank Touch

Parabit 200-20032 is an ACS-1 black insert reader with SkimGard technology. It features 3 point fraud detection system (overlay/tamper/cable cut), remote ACS card reader SkimGard logic board, interface board and decals set.

Parabit 200-10104 is an SkimGard insert reader only for ACS-1 control panel.

Parabit 200-10121 is an ACS-2 black insert reader with SkimGard technology. It features 3 point fraud detection system (overlay/tamper/cable cut), remote ACS card reader SkimGard logic board, interface board and decals set.

AD34 Single Gang Anodized Aluminum Backplate 

Application The wall-mounted reader is to be used as part of access control systems for doors in which the locking or blocking element is an automatism: Automatic doors, a car park barrier, doors with electric or magnetic strike plates, etc. It is a proximity card reader which incorporates a relay and a control unit which manages both the reader and the relay. Via the relay, the control unit will decide weather or not to activate the door's locking element, depending on weather the user who is attempting to open the door has authorised access or not. Specification Contactless - Reading cards/credentials via proximity Autonomous operation -  The wall mounted reader makes decisions autonomously, without any type of external and/or centralised control unit Read and write functionality - Updating user accesses via their own cards/credentials, the events are stored in both the wall-mounted reader and in the users' credentials Low maintenance - The lack of contact between the chip and the reader provides greater durability and low maintenance costs

The completely potted RFID reader MCR is developed for easy mounting over a 55mm switchbox or for surface mounting, using the extra supplied mounting frame. A wide selection of software programs and interfaces allows this reader to be used in all kind of applications. Furthermore, the RFID reader MCR is also available with integrated keypad. Optionally, the RFID reader MCR or MCR/K can be supplied with integrated relay. The following technologies are supported by MCR & MCR-K: LEGIC RF (advant & prime), ISO14443A+B (MIFARE, DESFire, Infineon SLE, SmartMX) ISO15693 (EM4035, Tag-It HFI, Infineon SRF55VxxP, ISO18000-3 mode 1) Sony Felica (ISO18092), NFC (passive mode) Inside Secure (UID only), HID iCLASS ISO5693 (UID only)

Leading global provider of security and safety solutions Ingersoll Rand has launched aptiQ™, a series of multi-technology readers designed to simplify the transition from older security platforms, such as proximity 125kHZ, to smart technology. The new range of electronic access control readers includes the ability to read a variety of contactless technology platforms, such as proximity, XceedID® MIFARE®, and aptiQ™ MIFARE DESFire™ EV1 smart card. The readers are also Near Field Communication (NFC) compliant, giving users the ability to migrate to mobile credentials in the future. To maintain the highest security levels, the aptiQ™ reader allows mutually encrypted communication between the card, reader and diversified keys, which protect data integrity and prevent unauthorised access. Paul Taylor, Sales Leader for electronic access control products at Ingersoll Rand, said: “The aptiQ™ readers are a superior product from both an aesthetic and technological point of view. Our new product range is designed to provide installers with unique advantages over others available on the market today.  Existing proximity systems can be expanded and upgraded to SMART technology with ease, whilst the simplified offering allows one reader to be carried to cover virtually all their maintenance requirements.” “We are so confident that installers will love the new AptiQ range”, he continues, “that we are offering 100 installers an MT15 unit free of charge as part of a Try Me campaign. Anyone interested in receiving one should email [email protected] or call 01922 707400.” The aptiQ™ readers come in four contemporary designs with various colour options to complement a range of décors. Installation is made quick and easy using a simplified mounting bracket and a ‘plug and go’ wiring harness which enables prewiring in new construction and allows for easy maintenance in the future.  For more information about Ingersoll Rand Security Technologies please visit www.ingersollrand.co.uk.

Contactless - Reading cards/credentials via proximity Autonomous operation - The wall mounted reader makes decisions autonomously, without any type of external and/or centralised control unit Read and write functionality - Updating user accesses via their own cards/credentials, the events are stored in both the wall-mounted reader and in the users' credentials Low maintenance - The lack of contact between the chip and the reader provides greater durability and low maintenance costs