Intercom: Audio, Video Intercom Systems  (2,665)

PoE (IEEE 802.3af class 0) DIN rail mountable Eight simultaneous calls per adaptor Supports up to 9,999 IXG mobile apps Optional 4G LTE data connection Allows telephone calls from door and entrance stations

Works with existing 2-conductor wire Supplies PoE to stations Rack mount receiver LED status indicators

Eight 10/100/1000 BASE-T PoE ports 64W PoE power budget Supports IEEE 802.3at PoE Quiet, fanless design Web interface for management

Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

Weather resistant Vandal-resistant Inside space for cabling Mounts to 1-gang box or ring Can mount on a flat wall

Mounts JO-DV, JP-DV, or JV-DV to a door frame or mullion Designed to fit unit precisely and conceals wiring inside Can mount to either right or left of door

An 18-Gauge stainless steel enclosure designed for surface mounting the JO-DVF, JP-DVF, and JP-DVF video door stations Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

An interface between the door release contact on the Aiphone master station or CEU and the actual release mechanism Form C relay for 18-24V DC intercom systems Both normally open and normally closed output options

An adaptor for the JO Series video intercom system Allows two video door stations to be used in a standard or app-enabled system The adaptor has inputs for two JO Series video door stations and outputs to control door release for each of those door stations When a visitor calls at the door station, his image will be displayed on the inside station(s) The person at the JO-1MDW, JO-1MD, or JO-1FD, answers the call, and if they decide to grant the visitor entry, pushes the door release button to activate the electric lock only at the associated door If one door station is in use, the call button on the other door station will not activate a call-in

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) High-power speaker Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Aiphone GT-NSP-L is a vandal resistant panel for GT-NSB display module.

Aiphone GT-303HB is a vandal resistant 3x3-module surface mount box for GT Series entrance panel.

Aiphone GT-4B is a flush mount 4-module back box.

Aiphone GTW-DP is a distribution point terminal slip for R1/R2 audio lines.

Allows one PS-2420UL to power up four GT-1C7W app-enabled tenant stations Replaces existing GT-4Z adaptors in a standard GT system, and requires 1 PS-2420UL per GT-4ZP Includes 4 power jumpers (GTW-24J) that are to be installed on the GT-1C7W between the B1/B2 and +/- terminals, which provides power to the GT-1C7W without having to install a local PS-2420UL for each tenant station

Interfaces AX video door station with 3rd party alternate transmission methods for longer distances Transmitter module for fiber connection

Weather resistant Inside space for cabling Mounts to 1-gang box or ring Can mount directly to wall surface Powder-coated white baked epoxy finish

Duplex intercom kit, master and sub handset requires PS6D

for LEM-1DL

Aiphone AMP-LE-S/2 is a surface sub audio panel with 2 buttons.

7 core, 9mm diameter solid conductor three pair polyethylene cable, 200 metre roll.

1 way kit Audio Kits Door Entry

Aiphone JBW-BA functions with JA, JF, JK and KC video door stations. Extends wiring distance to video monitors from 330' up to 980' max. Requires specific cable: Aiphone #851602 or #851602DB (Direct Burial).

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Provides a 24V DC output to power the strobe light in Aiphone’s wall boxes and towers The IX Series emergency stations have a secondary PoE output (passthrough) that can be used to connect to this splitter The PoE passthrough will only be usable if the IX Series station is connected and powered via a PoE+ switch

An 18-Gauge stainless steel surface mount 30° box designed for angle mounting the JO-DV, JP-DV, and JV-DV video door stations Applicable for wide or double door entrances where the door station needs to be mounted off to the side of the door, and provides a better viewing angle for the camera Weather resistant Vandal-resistant Inside space for cabling

Compatible with most Aiphone surface mount door stations Attachment holes for different standard mounting boxes, including 1- and 2-gang Mild steel front box, stainless steel back plate Conduit knockout at the base

Provides a better viewing angle for the camera Compatible with Aiphone 1-gang surface mount door stations Angles 1-gang door stations outward by 30° Can mount to either right or left of door Hinged cover for mounting door station

Made of 12 gauge stainless steel Caged beacon/strobe light on top Emergency Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

Aiphone GT-DBP is a vandal resistant panel for GT-DB(-VN) audio module.

Aiphone GF-1P is a 1-call button panel for GT-SW.

Aiphone GF-2P is a 2-call button panel for GT-SW.

Aiphone GF-2B is a flush mount 2-module back box.

Aiphone GT-102HB is a vandal resistant 1x2-module surface mount box for GT Series entrance panel.

EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) High-power speaker Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Aiphone GT-203HB is a vandal resistant 2x3-module surface mount box for GT Series entrance panel.

Aiphone GF-3B is a flush mount 3-module back box.

Aiphone GT-BCXB-N expanded bus control unit distributes power and data to GT Series stations for expanded systems.