Intercom: Audio, Video Intercom Systems  (2,530)

PoE (IEEE 802.3af class 0) DIN rail mountable Eight simultaneous calls per adaptor Supports up to 9,999 IXG mobile apps Optional 4G LTE data connection Allows telephone calls from door and entrance stations

Works with existing 2-conductor wire Supplies PoE to stations Rack mount receiver LED status indicators

4-6 digits, 2 outputs.

for LEM-1DL

Aiphone AMP-LE-F/2 is a 2 button stainless steel door station for use with the various Aiphone audio intercom systems.

7 core, 9mm diameter solid conductor three pair polyethylene cable, 200 metre roll.

AIPHONE FIREFONE exchange unit to expand firefone-9+ to 19 zones

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Eight 10/100/1000 BASE-T PoE ports 64W PoE power budget Supports IEEE 802.3at PoE Quiet, fanless design Web interface for management

Flush wall-mounted Panel is made of self-extinguishing resin Frame & Back Box is made of self-extinguishing plastic

Provides a better viewing angle for the camera Compatible with Aiphone 1-gang surface mount door stations Angles 1-gang door stations outward by 30° Can mount to either right or left of door Hinged cover for mounting door station

4 core 0.9mm diameter solid copper, polyethylene insulation 100m.

Aiphone CVFS-1  is a flush mount 1 button panel with MK-DAC pan and tilt.

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Stainless steel construction One conduit knockout on the bottom side One or two-gang mounting hole pattern Built-in rain hood

Vandal-resistant with 16-gauge stainless steel construction Flexible design can be mounted to either side of the door 1-gang hole pattern allows for easy installation

Weather resistant Vandal-resistant Inside space for cabling Mounts to 1-gang box or ring Can mount on a flat wall

An 18-Gauge stainless steel surface mount 30° box designed for angle mounting the JO-DV, JP-DV, and JV-DV video door stations Applicable for wide or double door entrances where the door station needs to be mounted off to the side of the door, and provides a better viewing angle for the camera Weather resistant Vandal-resistant Inside space for cabling

UL-514-A listed electrical box included at the base Access panel at the rear base of the tower Built-in threaded studs in base of the tower ASSISTANCE signage Beacon/Strobe is always lit; flashes during emergency call-in (Requires 24V DC) Weather and vandal resistant LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meets ADA regulations

EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Aiphone GT-102HB is a vandal resistant 1x2-module surface mount box for GT Series entrance panel.

for EL-9S

1.5 Amp DC/1 Amp AC

12

Aiphone C2-PE-100 is a polyethelyn cable of 100 metres.

6 core, 9mm diameter solid conductor three pair polyethylene cable, 100 metre roll.

Aiphone CVFS-1  is a surface mount 1 button panel with MK-DAC pan and tilt.

Provides a 24V DC output to power the strobe light in Aiphone’s wall boxes and towers The IX Series emergency stations have a secondary PoE output (passthrough) that can be used to connect to this splitter The PoE passthrough will only be usable if the IX Series station is connected and powered via a PoE+ switch

Provides a normally open dry contact closure upon call-in at a tenant station Also provides a contact to turn on external light at entrance station when calling tenant station

Flexible design can overhang mullion on either side of the door Wire cutouts allow for installation when there is an external conduit Clearance for Cat-5/6 cables prevents overbending

Allows desk mounting of master and/or handset station Station is propped up for easier viewing Pre-drilled mounting holes Constructed with sturdy ABS plastic Adjustable to 45° or 60° angles

Mounts JO-DV, JP-DV, or JV-DV to a door frame or mullion Designed to fit unit precisely and conceals wiring inside Can mount to either right or left of door

An 18-Gauge stainless steel enclosure designed for surface mounting the JO-DVF, JP-DVF, and JP-DVF video door stations Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

An interface between the door release contact on the Aiphone master station or CEU and the actual release mechanism Form C relay for 18-24V DC intercom systems Both normally open and normally closed output options

Steel construction Mounts to a door mullion of a glass entry Weather resistant for outdoor use Mounts door station at 45° angle Mounts any 1-gang surface mount Aiphone Audio-only or Audio Video Door Station

Vandal resistant stainless steel Mounts Intercom and Access Control device together Any 1-gang Audio-only or Audio Video Door Station can be used Blank faceplate allows wide range of mounting options Hooded covering to protect units from direct exposure to weather Tamper resistant mounting hardware

An adaptor for the JO Series video intercom system Allows two video door stations to be used in a standard or app-enabled system The adaptor has inputs for two JO Series video door stations and outputs to control door release for each of those door stations When a visitor calls at the door station, his image will be displayed on the inside station(s) The person at the JO-1MDW, JO-1MD, or JO-1FD, answers the call, and if they decide to grant the visitor entry, pushes the door release button to activate the electric lock only at the associated door If one door station is in use, the call button on the other door station will not activate a call-in

Reflective EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Made of 12 gauge stainless steel Fully enclosed beacon/strobe light on top Emergency Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower