Access control systems & kits  (1,145)

ARES 4.5 security management software is a multi tasking and multi operator platform that is capable of controlling up to 128 Challengers from a single computer. The application is made more robust than most systems available because of the QNX operating system on which it operates. QNX is a real time operating system that is designed to be deterministic. It is also scalable so that it is equally at home on a small system needing real time graphics or a more robust operating environment as it is in large prison and university installations. ARES is designed to run on its own independent network, moreover operator interfaces can be configured to suit low skill levels.

Application Ideal for Transit, Office or meeting room doors(Specific model for panic exit doors & special kits for glass doors available) Specification All MANAGEMENT KITS are supplied as follows:- SMARTair Software. Licence for the number of doors, Authorisation Key, Encoder, Programming Device, 50Mifare 1K user cards and USB to RS232 Adapter.  Licences to Upgrade from 10 or more doors are available upon request. Licences are only required when increasing doors from the initially purchased Management Kit.

Faceit Argus is an automated full-time facial surveillance and identification engine which works with both new and existing CCTV systems to serve as an observation point. Features the plug-and-play hardware BNA components and audible alerts. The system is based on the Biometric Network Platform and can handle an unlimited number of camera inputs, and, through the internet, be linked to any size database.

MICRO XP™ is a flexible hybrid module which is supplied with a clock and data interface only. (magnetic stripe, ABA, ISO track 2 output) MICRO XP™ modules do not have an internal RF antenna. An external antenna needs to be connected. Main features include: Clock and data output only, External antenna connection required (read ranges up to 180 mm), Low cost RFID module.

Reader Interface - links card readers of most technologies to the Geoffrey Reader Controller. Can be used in a small system with one reader to the largest systems with thousands of readers. Compatible with many read head technologies: magnetic stripe, bar code, Wiegand, barium ferrite, smart card, biometric, and more. Connector for one multicolour LED for GO or NO/GO indication. Connector for one buzzer.

The RCNX2 Reader Controller connects directly to the serial port on an Access Control Processing Unit or a RCNX Master Controller. Controls one or two card readers using various technologies: magnetic stripe, proximity, wiegand, or stand-alone keypads. RCNX2 Reader Controllers can be used with all Geoffrey 32-bit software products. The RCNX2 Reader Controller can be used in systems with Geoffrey Master, Reader, Alarm, and Elevator Controllers. RS-232 or R-485 data communication.

The GXLT2 - RS232 to RS485 Translator is required to connect up to 16 GRCNX-2 Reader Controllers to a single communications port.

Proximity and PIN code keypad, for use with VXS-100

internal/external for use with VXS-100 (service spare)

Expandable to 100000 users. Works with Memorilok Easyset 1 controller.

Works with Memorilok Easyset 4 controller.

Advanced proximity reader and controller (remote). Functions include door monitoring, printable door events, tamper output and PC software option. Also available with PIN.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Standard, 4 core, 100m

Standard, 8 core, 100m

Communication between the RCNX reader controller and the system PC can be through the Master Controller, direct to the serial port, IP Addressable, Modem or through a secondary communication port. Each RCNX can be used with the reader and any combination of read head technologies: Magnetic Stripe, Wiegand, Barium Ferrite, Bar Code, Smartcard, and keypad. The reader interface model RI is used.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

The RCNX2 Reader Controller connects directly to the serial port on an Access Control Processing Unit or a RCNX Master Controller. Controls one or two card readers using various technologies: magnetic stripe, proximity, wiegand, or stand-alone keypads. RCNX2 Reader Controllers can be used with all Geoffrey 32-bit software products. The RCNX2 Reader Controller can be used in systems with Geoffrey Master, Reader, Alarm, and Elevator Controllers. RS-232 or R-485 data communication.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Communication between the RCNX reader controller and the system PC can be through the Master Controller, direct to the serial port, IP Addressable, Modem or through a secondary communication port. Each RCNX can be used with the reader and any combination of read head technologies: Magnetic Stripe, Wiegand, Barium Ferrite, Bar Code, Smartcard, and keypad. The reader interface model RI is used.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Smart Mifare Contactless Technology. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). With Smart Mifare Contactless Technology. Visual indication by red or green LEDs, and buzzer used for audio indication.

The GIPRCNX Allows all Geoffrey Reader Controllers to be connected via Ethernet connection and be IP addressable over a local 10BaseT and/or Wide Area Network (LAN and/or WAN).

The Jetstream IP is designed to assist corporations using Tecom Challenger integrated access and alarm system for off-site monitoring of alarms. Jetstream IP allows additional new Challenger panels to automatically enrol, or add themselves, and their basic details without operator intervention. Jetstream IP allows corporations to utilise their existing Ethernet resources to connect Challengers in LAN or WAN configurations while conveying only the Contact ID event to the remote monitoring station. Jetstream IP is supplied for systems up to 20 sites/100 sites/300 sites/enterprises over 300 sites. Jetstream IP runs on Linux operating system.

External proximity reader, for use with Tag-In-A-Bag only.

with RS232 for use with VXS-100, with SESAM software.

Long range, wiegand compatible

for use with VXS-100

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Roadside pedestal complete with MRC310 reader. Powder coated universal pedestal. Stainless steel faceplate with status indicator lamps. Built-in power supply unit. Option to include intercom call unit. Supplied with all necessary ancillary components. Available in output formats to suit most OEM control systems including CRC200 and CRC500.

Works with DAC 720 controller, DAC710 ISO proximity cards (50), and DAC711 proximity key fobs (10).

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and proximity reader. Up to 16 form C single pole/ double throw relays can be supported.

Advanced proximity reader and controller (remote). Requires advanced PC software (AB116). Functions include door monitoring, printable door events, tamper output and PC software option. Also available with PIN. Works with proximity cards (Cards Prox).

The Identix biometric network platform consists of network ready elements–hardware components - biometric network appliances (BNAs), and programming logic for connecting the BNAs to each other or to standard security and information systems. Designed to work with all biometric systems in large security environments.

Cherry’s Fingertip ID Board incorporates Identix’s DFR 200 reader for one touch security. Compatible with Windows, and has 104 keys, 43 of which are programmable. Also features a top-mounted, optional smart card reader/writer and interfaces with Identix’s BioLogon software.

The RCNX2 Reader Controller connects directly to the serial port on an Access Control Processing Unit or a RCNX Master Controller. Controls one or two card readers using various technologies: magnetic stripe, proximity, wiegand, or stand-alone keypads. RCNX2 Reader Controllers can be used with all Geoffrey 32-bit software products. The RCNX2 Reader Controller can be used in systems with Geoffrey Master, Reader, Alarm, and Elevator Controllers. RS-232 or R-485 data communication.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.