Access control systems & kits  (1,017)

Works with Memorilok Easyset 4 controller.

The GIPRCNX Allows all Geoffrey Reader Controllers to be connected via Ethernet connection and be IP addressable over a local 10BaseT and/or Wide Area Network (LAN and/or WAN).

Proximity and PIN code keypad, for use with VXS-100

Expandable to 100000 users. Works with Memorilok Easyset 1 controller.

MICRO XP™ is a flexible hybrid module which is supplied with a clock and data interface only. (magnetic stripe, ABA, ISO track 2 output) MICRO XP™ modules do not have an internal RF antenna. An external antenna needs to be connected. Main features include: Clock and data output only, External antenna connection required (read ranges up to 180 mm), Low cost RFID module.

FacePASS is a face recognition enabled access control and security product used to conduct one-to-one verification of an individual's identity to authenticate that the holder of an ID document or token is the authorized user. The system carries out a real-time comparison between a live face and a stored reference image to confirm the identity of that person and grant respective rights and privileges while guaranteeing maximum reliability, security and efficiency. In access control applications to high security areas, such as in airports, banks or nuclear power plants, FacePASS ensures that access is granted for authorized persons only. In ticketing applications for the leisure industry, e.g. zoos or fitness clubs, it effectively prevents ticket fraud with member cards or season tickets and ensures high user throughput.

Advanced proximity reader and controller (remote). Functions include door monitoring, printable door events, tamper output and PC software option. Also available with PIN.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Intergral internal/external RDR3 proximity read. 1 master fob, 12v DC 1 Amp PSU required, compatible with TAG-10 proximity fobs

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

The RCNX2 Reader Controller connects directly to the serial port on an Access Control Processing Unit or a RCNX Master Controller. Controls one or two card readers using various technologies: magnetic stripe, proximity, wiegand, or stand-alone keypads. RCNX2 Reader Controllers can be used with all Geoffrey 32-bit software products. The RCNX2 Reader Controller can be used in systems with Geoffrey Master, Reader, Alarm, and Elevator Controllers. RS-232 or R-485 data communication.

Livescan standalone unit which captures, prints, and transmits fingerprint. Digital image capture at 600 dpi. Consist of a TI DSP scanner processor and Intel system processor. Portable version available: Tenprinter transportable. Configuration and Add-on Options: TouchPrint Hardcopy Printing System, AccuCapture finger sequence checking software, TouchPrint System Management Reports, TouchPrint 600 Palm Scanner, TouchPrint Card Scan system, TouchPrint Store & Forward system.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Expansion Input/Output (I/O) boards are used within the Superterm or Smarterm Intelligent Controller to increase the standard input and output capacities. The Superterm will accept up to three expansion boards, while the Smarterm accepts four. The board mount to the inside door of the controller cabinet. There are two basic types of expansion boards: Alarm Expander Boards and Relay Expander Boards. The Alarm Expander Board offers 16 supervised inputs typically used for alarm contacts, request to exit devices, critical condition sensors or other system inputs.

Standard, 8 core, 100m

The Identix biometric network platform consists of network ready elements–hardware components - biometric network appliances (BNAs), and programming logic for connecting the BNAs to each other or to standard security and information systems. Designed to work with all biometric systems in large security environments.

ITrust is a web-based resource protection which enables the identification of parties in a transaction. It integrates a range of integrated biometric security products – for computers, networks and physical locations.

Cherry’s Fingertip ID Board incorporates Identix’s DFR 200 reader for one touch security. Compatible with Windows, and has 104 keys, 43 of which are programmable. Also features a top-mounted, optional smart card reader/writer and interfaces with Identix’s BioLogon software.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Smart Mifare Contactless Technology. Visual indication by red or green LEDs, and buzzer used for audio indication.

The Jetstream IP is designed to assist corporations using Tecom Challenger integrated access and alarm system for off-site monitoring of alarms. Jetstream IP allows additional new Challenger panels to automatically enrol, or add themselves, and their basic details without operator intervention. Jetstream IP allows corporations to utilise their existing Ethernet resources to connect Challengers in LAN or WAN configurations while conveying only the Contact ID event to the remote monitoring station. Jetstream IP is supplied for systems up to 20 sites/100 sites/300 sites/enterprises over 300 sites. Jetstream IP runs on Linux operating system.

Roadside pedestal complete with MRC310 reader. Powder coated universal pedestal. Stainless steel faceplate with status indicator lamps. Built-in power supply unit. Option to include intercom call unit. Supplied with all necessary ancillary components. Available in output formats to suit most OEM control systems including CRC200 and CRC500.

Two-port RS485 computer communication card for use with VXS-100 and SESAM.

LCD Programming (service spare) for VSX-100 & PIAB

22 mm diameter button tag in transparant PET foil to customize your own RFID cards and tags.

Communication between the RCNX reader controller and the system PC can be through the Master Controller, direct to the serial port, IP Addressable, Modem or through a secondary communication port. Each RCNX can be used with the reader and any combination of read head technologies: Magnetic Stripe, Wiegand, Barium Ferrite, Bar Code, Smartcard, and keypad. The reader interface model RI is used.

The RCNX2 Reader Controller connects directly to the serial port on an Access Control Processing Unit or a RCNX Master Controller. Controls one or two card readers using various technologies: magnetic stripe, proximity, wiegand, or stand-alone keypads. RCNX2 Reader Controllers can be used with all Geoffrey 32-bit software products. The RCNX2 Reader Controller can be used in systems with Geoffrey Master, Reader, Alarm, and Elevator Controllers. RS-232 or R-485 data communication.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). With Smart Mifare Contactless Technology. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 110g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

The KB-1000 is a fingerprint lock and can grant access in three ways: Fingerprint, PIN Code or Secure Key. The KB-1000 has a single latch mortise providing easy installation, with no need to modify most existing doors. Powered by 4AA batteries, this lock can be operated for up to a year without changing the batteries. 30 users can be enrolled directly on the fingerprint lock at the door.

for use with VXS-100

External proximity reader, for use with Tag-In-A-Bag only.

with RS232 for use with VXS-100, with SESAM software.

for use with VXS-100

Four-port RS485 computer communication card for use with VXS-100 and SESAM.

For internal use. LED status. Fail safe/fail secure lock. Remote dial-up. 127 time zones.

Communication between the RCNX reader controller and the system PC can be through the Master Controller, direct to the serial port, IP Addressable, Modem or through a secondary communication port. Each RCNX can be used with the reader and any combination of read head technologies: Magnetic Stripe, Wiegand, Barium Ferrite, Bar Code, Smartcard, and keypad. The reader interface model RI is used.