Access control systems & kits  (1,065)

Moulded polycarbonate with fully encapsulated electronics. 110g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

The Jetstream IP is designed to assist corporations using Tecom Challenger integrated access and alarm system for off-site monitoring of alarms. Jetstream IP allows additional new Challenger panels to automatically enrol, or add themselves, and their basic details without operator intervention. Jetstream IP allows corporations to utilise their existing Ethernet resources to connect Challengers in LAN or WAN configurations while conveying only the Contact ID event to the remote monitoring station. Jetstream IP is supplied for systems up to 20 sites/100 sites/300 sites/enterprises over 300 sites. Jetstream IP runs on Linux operating system.

The KB-2000 door-lock scans fingerprints in less than a second and matches them to as many as 99 stored prints in less than two seconds. It is designed to comply with the global Fire and Safety regulations. User registration, deletion and mode programming are done through the keypad. Built-in infrared remote sensor enables other audio-video security apparatuses to be interfaced with the lock.

Expansion Input/Output (I/O) boards are used within the Superterm or Smarterm Intelligent Controller to increase the standard input and output capacities. The Superterm will accept up to three expansion boards, while the Smarterm accepts four. The board mount to the inside door of the controller cabinet. There are two basic types of expansion boards: Alarm Expander Boards and Relay Expander Boards. The Alarm Expander Board offers 16 supervised inputs typically used for alarm contacts, request to exit devices, critical condition sensors or other system inputs.

with RS232 for use with VXS-100, with SESAM software.

Long range, wiegand compatible

LCD Programming (service spare) for VSX-100 & PIAB

Standard, 6 core, 100m

Standard, 8 core, 100m

Advanced proximity reader and controller (remote). Requires advanced PC software (AB116). Functions include door monitoring, printable door events, tamper output and PC software option. Also available with PIN. Works with proximity cards (Cards Prox).

The Keytronic 104-key Secure Scanner Keyboard comes packaged with Identix’s BioLogon software and a built-in DFR-200 scanner (fingerprint biometric sensor and 200 optical sensor).

Cherry’s Fingertip ID Board incorporates Identix’s DFR 200 reader for one touch security. Compatible with Windows, and has 104 keys, 43 of which are programmable. Also features a top-mounted, optional smart card reader/writer and interfaces with Identix’s BioLogon software.

Reader controller. Storage capacity of 4000 transactions. Uses reader interface RI. Can also be used with keypad and biometric reader. Up to 16 form C single pole/ double throw relays can be supported.

Moulded polycarbonate with fully encapsulated electronics. 203g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 115g in weight mounted by 2 X M3.5 screws (included). Compatible with HID Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

Moulded polycarbonate with fully encapsulated electronics. 110g in weight mounted by 2 X M3.5 screws (included). Compatible with Geoffrey Proximity Formats. Visual indication by red or green LEDs, and buzzer used for audio indication.

The GXLT2 - RS232 to RS485 Translator is required to connect up to 16 GRCNX-2 Reader Controllers to a single communications port.

The KB-1000 is a fingerprint lock and can grant access in three ways: Fingerprint, PIN Code or Secure Key. The KB-1000 has a single latch mortise providing easy installation, with no need to modify most existing doors. Powered by 4AA batteries, this lock can be operated for up to a year without changing the batteries. 30 users can be enrolled directly on the fingerprint lock at the door.

The KB3000 is the latest offering from the lock manufacturer. This lock is available as a stand-alone unit or can be networked for hotels or other large facilities. Optimum security enables the user to deadbolt the door from the outside when away on holiday or for long periods. 5 latch international mortise lock available in silver or gold satin finish.

Proximity and PIN-code. Wiegand compatible

Four-port RS485 computer communication card for use with VXS-100 and SESAM.

Eight-port RS485 computer communication card for use with VXS-100 and SESAM.

Standard, 12 core, 100m

Standard, 4 core, 100m

Standard, 6 core, 100m

Standard, 8 core, 100m

For internal use. LED status. Fail safe/fail secure lock. Remote dial-up. 127 time zones.

Works with DAC 720 controller, DAC710 ISO proximity cards (50), and DAC711 proximity key fobs (10).

Proximity reader kit with PSU, controller, electric strike, exit switch and 50 cards. Kit model DAM504 comes with electro magnet instead of electric strike.

Panel mounted version-model DAC112.

For use with Deelock controllers -DAC712 and DAC714.

Standard or advanced (8 inputs/outputs) modular based system. Works with ICSPro controller and proximity cards. Programmed via Windows PC software (AB3002). Features photo ID, anti-passback, audit trail, alarm management; time & attendance. Accessories: RS232 communications module (RC2002); software communications line converter (LD4008).

With Fingerprint Biometric Sensor DFR‚ 200 optical sensor. The MT Digit plugs into the PC’s parallel port.

All Stand Alone Man Kits are supplied with SMARTAir Programming card, 25 Mifare 1K User Cards / Shadow and an Emergency Open Unit. For a complete Standalone system you will require a Stand Alone Man Kit, lockcase and SMARTAir Stand Alone Door Escutcheon / Wall Reader. SMARTair Stand Alone is suitable for small sites up to 3 Readers and 25 Users.  Licences to Upgrade from 10 or more doors are available upon request. Licences are only required when increasing doors from the initially purchased Management Kit.

PegaSys access control systems, from Ingersoll Rand, provide competitively priced, quality security solutions that promise to make your environment safer, more secure and more productive - protecting people and property as well as assets. With a wide range of electronic and mechanical entry components to choose from, PegaSys provides a selection of security options to suit every requirement along with the flexibility to fulfil your current needs whilst adapting to any future needs. So, whether it’s the security of a hospital or care home, airport or industrial building, small business or large university that you’re looking to safeguard; PegaSys has the perfect system to suit you. Offline stand alone: The ideal solution for small businesses, offices, surgeries and residential buildings with a maximum of 50 people, this is both economical and simple whilst providing quality protection of individual doors. Battery-powered offline components means minimal installation costs. Credentials (cards or tags) can be deleted from the system through changes to access rights. Offline NetworkOnCard Designed for a larger number of doors and multiple users with different time profiles, this system allows for quick and easy changes to user permissions and as the cards are used to transfer the data there is no need for extensive programming of the offline components. Online / offline validation A sophisticated security solution, this system is designed for multiple doors and users in large, often dispersed, building complexes where changes to access rights occur regularly. System features and benefits include centralised maintenance and programming alongside automatic expiration of credential validity. Near Field Communication (NFC): To simplify things even further for the system administrator we’ve expanded our products around an NFC interface -resulting in a quicker reaction time to changes and automatic synchronisation between offline devices and the software,  to name but a few benefits. PegaSys door terminals and electronic cylinders: Thanks to the wide choice of hardware configurations the PegaSys system can be very easily selected to suit your specific requirements. This allows us to find the most cost-effective, visually attractive and simple solution for your installation. Meanwhile, our electronic cylinders can be installed in place of an existing mechanical cylinder to allow for the simple and swift conversion to an electronic system. Replacing an existing mechanical cylinder with an electronic cylinder is hassle-free too and takes just three to five minutes.

The easy-to-use LEGIC advant® Development Kit DK-2000 enables fast and efficient evaluation, exploration and experimentation of the benefits the contactless 13.56 MHz smart card technology LEGIC advant offers. The kit provides developers with a complete development solution to get quickly off the ground, accelerate their application development and rapid prototyping. The Development Kit DK-2000 supports ISO 14443 A, ISO 15693 and the LEGIC RF standard.

LED Indication, N/O contacts

LED Indication, N/O contacts

Tag + PIN optional, indoor/outdoor use, IP54, 12v DC 1 Amp PSU is required