Access Control Accessories  (1,204)

Delta Scientific 3546-4 is a digital vehicle loop detector. The presence relay is normally open and normally closed. Relay can be set to a pulse function on arrival or departure.

The DSX-SPS Serial Port Switcher is the device used to switch serial port connected controllers and dial-up modems between the Primary Comm Server and the Hot Swap Backup Comm Server. This is not necessary for IP or LAN based communications to controllers. The DSX-SPST in turn signals the individual 2PC modules to switch from Primary to Backup serial ports.

The DSX-SPST (Serial Port Switch Trigger) board is the power distribution and Backup Comm Server monitoring board. It receives +15VDC (Class II Power Limited) from the DSX-1040PDM board and distributes it to the 2PC boards through 4 - 12VDC, 1A fused outputs. The SPST board has an RS-232 port that connects to an extra port on the Backup Comm Server. This is the port which sends the “activate” command. The SPST also has 4 relay outputs that are used to “trigger” the 2PC boards when the “activate” command is received.

The DSX-1030PR5 retrofit processor can be used with any “Revised” DSX-1030 Series Controllers. The 1030PR5 provides more memory, Flash ROM, and a faster processor and gives the 1030 Series Controllers the same capabilities as the 1040 Series. The processor can be integrated into older systems giving them new life and longevity. The DSX-1030PR5 has 512K of RAM and allows the older 1030 series controllers to have the same memory capacity as all new 1020 and 1040 Series Controllers.

Delta Scientific 3546-2 is a digital vehicle loop detector.The detector features dual relay version with standard 11-pin male connector. Presence relay is normally open or normally closed. Normally open pulse relay on arrival. Pulse relay can be set to pulse on departure.

Delta Scientific 3546-7 is a digital vehicle loop detector. Presence normally open and nomally closed. Relay can be set to a pulse function on arrival or departure. 

8 I/Os with supervised inputs and configurable levels 8 form C relays 12 and 24 V DC output PoE+, PoE or 12 and 24 V DC input Based on Axis open protocols – VAPIX® and ACAP

Delta Scientific MTC6000 Flush Mount motorised traffic controller features a modular design, electro-mechanical operation and pedestrian friendly control teeth. It is designed to control authorised traffic flow on a day-in-day-out basis as well as severely damage or deflate the tires of an unauthorised vehicle. It provides around the clock protection for car storage lots, rental agencies, airports, government buildings or any location where theft or fee-avoidance is an issue. The Control Teeth of MTC6000 are made from a high tensile steel with points encased in specially formulated molded caps that break away under the impact and load of a motor vehicle, yet provide protection to a hapless pedestrian that might fall or bump against the unit. The ‘Pedestrian Friendly’ Sabre Tooth Control Teeth are rotated into position by a highly reliable electro-mechanical system in less than 1.5 seconds.

Delta Scientific 3546-10 is a digital vehicle loop detector. This detector uses the 10-pin Amphenol military connector. Presence nomally open and closed with the pulse relay normally open on arrival. Pulse relay can be set to pulse on departure.

Delta Scientific TC3 conversion module is designed to convert obsolete spring wire controllers to Sabre Tooth operation. Module size 12 inches long x 8.5 inches wide Adapter strips 72 inches wide and 12 inches long Three Sabre Teeth per module Long life torsion springs Top plate – Alert Red, Teeth – Zinc plated Weight 120 pounds, approximately Latch Down mechanism available

Delta Scientific 3546-9 is a digital vehicle loop detector. Presence relay normally open and nomally closed options. The pulse relay is normally open on arrival. Pulse relay can be set to pulse on departure.

Software House PSX-250-MB 250W PSU board connects to the dedicated lock power inputs on the ACM boards, providing an efficient method to manage power to each separate locking device.

Multiple outputs for auxiliary power distribution or direct lock control and additional accessory power distribution modules Dual Buss Architecture for field selectable Buss 1 or Buss 2 output Fire Alarm Interface (FAI) for egress lock control when used with the DC2 output of a PSX power supply Configurable fail-safe, fail-secure modes of operation when connected to an PSX power supply Multiple modules can be daisy chained to add additional outputs Snap-in style mounting standoffs with fast-on connect cables for easy field installation Visual Indicators - green LED per output RoHS compliant, lead free design

Break glass unit. Colours available -green, blue and white.

Monitors and reports on system integrity, battery health, output condition Monitors health and status of host power supply and battery set Auto-schedule or manual test and report battery standby time Remote supervision of battery’s state of charge Remote monitoring and alert of external temperature fluctuations Monitoring of internal cabinet temperature Remote power cycling control of external equipment Time and date stamp system log reports of last 1000 events Email notification on AC and system fault occurrences, aging or drained battery, Fire Alarm Interface(FAI) activation, outside current or voltage preset limits, external room temperature outside preset limit, and external event activation SNMP support for get, set, and trap notification

Compact biometric server, the core of the Medium Enterprise Solution, pre-installed and pre-configured. Hardware features: Automatically connects up to 25 TBS devices Synchronises all data in the system Easy mounting and wiring

Wired for 16 reader iStar Ultra SE, Tie Wrap, 16 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Automatically connects up to five TBS devices Synchroni­ses all data in the system Easy mounting and wiring

The Integriti Medium Enclosure (M) is a universal sturdy metal enclosure designed for general purpose installation of Integriti, Inception or Concept Controllers, UniBus Devices and LAN Modules. The flexible design allows for a range of equipment to be fitted in various custom configurations to meet many installation requirement. A range of powered or non-powered versions are available to suit Integriti, Inception and Concept Controllers and modules. The Medium Enclosure's low profile side elevation protrudes less than 90mm from the mounting surface.

Provides uninterrupted power backup for iSTAR controllers and apC/8X AC failure supervision Dedicated interface with main power input of iSTAR and apC/8X Cabinet width matches iSTAR and apC/8X cabinet and uses the same key Reverse polarity protection Overcurrent protection Thermal protection UL 603 and UL 294 compliant

Morse Watchmans KeyRings deliver ease-of-use with a tamper-proof locking mechanism and a unique identification system. While other key rings require you to cut through the stainless steel and replace the entire ring, with Morse Watchmans’ replaceable hub technology you can add or remove keys, reuse the key ring and replace the hub at a  fraction of the cost.

75W 2U Power Supply/Battery Charger Provides DC power for LifeSafety applications Designed to fit neatly into standard 19” equipment racks, the streamlined cabinetry and exceptional features combine to significantly reduce installation and service costs Comes equipped with LED indicators that indicate current status Accepts an optional remote management device providing remote monitoring, remote battery testing, along with many other capabilities Removable terminal strips for field wiring Input and output surge suppression Automotive blade fuses for improved reliability Enclosed in a 16 gauge steel 2U rack mount chassis

Wired for 8 reader iStar Ultra, 8 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Aritech 2105A-G magnetic contact features closed loop and stainless steel armoured cable. It protects boats, trailers, and heavy equipment.

The Aiphone RY-PA is a relay adapter designed with relay contacts for use with the current LEF systems and the discontinued LDF and NDR systems. The relays can be wired for momentary or maintained activation. Outputs can be wired for Normally Open (N/O) and/or Normally Closed (N/C) contacts. Check out under the "Resources" tab above to find more detailed Aiphone information about this and related products. Click "Add to Cart" to purchase the RY-PA Door Release Relay.

Universal fit, Power size 5

2U Power Supply/Battery Charger for iSTAR Ultra unit Provides DC power for LifeSafety applications Designed to fit neatly into standard 19” equipment racks, the streamlined cabinetry and exceptional features combine to significantly reduce installation and service costs Comes equipped with LED indicators that indicate current status Accepts an optional remote management device providing remote monitoring, remote battery testing, along with many other capabilities Removable terminal strips for field wiring Input and output surge suppression Automotive blade fuses for improved reliability Enclosed in a 16 gauge steel 2U rack mount chassis

150W 2U RGS Power Supply/Battery Charger Flexible design allows for any system configuration Rack draw slide assembly simplifies controller wiring and maintenance Provides mounting for iSTAR Ultra or iSTAR Ultra SE ACM boards (max 2) or GCM boards (max 2) mounting within a standard EIA 19” electronics rack and have a maximum depth of 36”

Wired for 16 reader iStar Ultra, Panduit, 16 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

2U Power Supply/Charger for iSTAR Ultra SE unit, Lock Outputs, Network Provides DC power for LifeSafety applications Designed to fit neatly into standard 19” equipment racks, the streamlined cabinetry and exceptional features combine to significantly reduce installation and service costs Comes equipped with LED indicators that indicate current status Accepts an optional remote management device providing remote monitoring, remote battery testing, along with many other capabilities Removable terminal strips for field wiring Input and output surge suppression Automotive blade fuses for improved reliability Enclosed in a 16 gauge steel 2U rack mount chassis

A plastic enclosure without board ABS plastic, with front and rear tamper

Sapphire composite video cable per 100m

Small, economical closer without the frills of backcheck and delayed action. Template size selectable for door sizes from 850mm to 1100mm and from 40kg to 80kg in weight. Available with 2 cover options and a choice of 24 quality finishes. Value added cost saving features of the Accufit installation system.

PSU module Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

Wired for 16 reader iStar Ultra, Tie Wrap, Network Connected, 16 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Alpro ALP0654-1NS is an Indicator Plate 12vDC - no legend.

Door Contacts

Ideal as a replacement closer the Briton 200 series has been designed to cover the fixings of popular trimplate design closers on the market. Briton 220 is suitable for doors up to 1100 mm wide and 80 kg in weight. Briton 220 is windthrough adjustable strength closer with adjustable backcheck as standard. Closer is fixed to the pull (hinge) side of the door. Optional applications of closer fixed to transom on push side of the door or closer fixed to parallel arm on push side of the door also available. Door closing speed can be adjusted to either increase or decrease.

Windthrough adjustable strength closer for door sizes from 850mm to 1400mm and 40~120kg in weight. Economical full power range closer with adjustable backcheck as standard. Available with 2 cover options and a choice of 24 quality finishes. Value added cost saving features of the Accufit Installation System.

SALTO XS4 SALTO Panic Bar Antipanic is a new mortise lock panic bar for emergency exit doors. EN1125 tested and approved, the PBA12020 is compatible with both SALTO data-on-card and SALTO wireless systems, providing full control of the door. The SALTO PBA12020 is also available with a passive leaf panic bar for double emergency exit doors.