Access Control Accessories (1,113)
TESA Monobloc Series is a fire doors handle. The internal plate has been fixed to the handle with a black polypropylene coating. The covers, made of the same material, have been fixed to the internal escutcheon with clips. It is DIN 18273 certified.
Add to CompareDSX DSX-400DL door latch module allows the user to unlock with a card read, latch the door open with a second card read and to re-lock (put to time zone) the door with a third card read. Only users with the appropriate linking level will perform this function. Non-authorized users have normal access through the door.
Add to CompareWith eight output PTC Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design
Add to CompareThe DSX-USB Communications Interface is a simple yet rugged USB converter. This port powered device connects to any 2.0 USB Port through the supplied cable. The module provides an RS-232 output including DTR and a simultaneous RS-485 4 wire output.This module is protocol independent and can be used for a variety of applications and software not just DSX. The DSX-USB is built DSX tough with a rugged housing and all of the over-voltage surge protection you expect in a DSX product. Complete with removable terminal block and status LEDs, this USB Comm Interface has a DSX Edge.Single Channel USB to RS-232 or RS-485 for Master or Slave communications. This new module can provide the RS-232 required for a 1040 Series Master Controller or Dial-up Modem at the Comm Server. The RS-232 has optional DTR for modem use. The RS-485 output can be used for a 1020 Series Master Controller and all DSX Slave Communications used with IP Gateway.The DSX-USB can be used in conjunction with a DSXMCI to perform a short haul providing a 4 wire RS-485 connection that can be used with 2 twisted pair cable up to 4000'.Key features:USB to RS-232 with DTRUSB to RS-485 4 wireRemovable Terminal BlocksPort PoweredUSB 2.0 CompatibleOver Voltage Surge ProtectionProtocol IndependentCommunication Status LEDs
Add to CompareDSX Intelligent Controllers are independent processing 2 door packages designed to be cost effective building blocks that allows expansion in a scalable manner. Up to 8 doors can be controlled from 1 enclosure for an efficient space saving package. The controllers are strategically placed throughout the customer location connected together with a two twisted pair cable. Each Controller operates as a fully intelligent and independent control panel that retains all data necessary for system operation in its own RAM.
Add to CompareSALTO BioCote protected products are suitable for use in many commercial environments including hospitality, leisure, food, catering, laboratory, and healthcare sectors. BioCote is an antimicrobial agent containing silver which is engineered to provide continuous, built-in protection on the products surface. It works by binding with microbes and damaging their cells in a number of ways, disrupting their normal functions and preventing them from reproducing.
Add to CompareDSX-TDM5 are Time Display Modules that are designed to work specifically with the DSX system. They will display the system time that is being recorded when card holders use their cards. Typically used with the Time and Attendance feature in WinDSX.
Add to Compare3546-8NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.
Add to Compare3546-7NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.
Add to CompareAccess control specialist TDSi has launched a comprehensive range of ancillary products. Complementing the company's proven range of access control systems, this new, high quality range of locking products and accessories has been developed to provide a complete ‘one stop shop' for security installers.Commenting on the launch, TDSi's Product Manager, Duncan Gooch said: "Earlier this year, we undertook an in-depth customer research programme to identify areas where our range could be enhanced. One potential area that was clearly identified was ancillary products, with customers asking us to provide a range to complement our existing systems, which would allow them to buy a much broader range of products from just a single trusted source." "This range has been assembled in direct response to those requests. Developed to our exacting quality, value and performance standards, it combines with our established systems to deliver a comprehensive product portfolio to cover the vast majority of application requirements".The range includes magnets, electric strikes, bolts and shear locks for a wide number of applications, as well as a complete suite of ancillary items to cover the vast majority of project and installation needs: request to exit buttons, break glass units and door loops, as well as a range of high-quality power supply units.From micro magnets to secure a small cupboard door, through to mortice mounted magnetic shear locks, each product in the range is manufactured to the same high quality standards and is supplied with a comprehensive one year warranty.Duncan concluded: "We're delighted to be offering a true ‘one stop shop' service, and judging by the response we've had so far, so too are our customers."For more information, contact Duncan Gooch on +44(0)1202 724 950, [email protected], or visit TDSi's homepage.
Add to CompareMultiple outputs for direct lock control and additional accessory power distribution modules Dual Buss Architecture for field selectable Buss 1 or Buss 2 output Colour coded by function configuration jumpers for ease of programming Configurable fail-safe, fail-secure, and dry contact modes of operation Fire Alarm Interface (FAI) when used with an PSX power supply Fault detection and reporting to host power supply Multiple modules can be daisy chained to add additional outputs Snap-in style mounting standoffs with fast-on connect cables for easy field installation Visual LED Indicators - yellow fault, green per output RoHS compliant, lead free design
Add to CompareIncludes high resolution CCD camera with software zoom capabilities for capturing badgeholder images. Built-in flash, tripod system. Rapid images download. USB 1.1 (USB 2.0 compliant) PAL or NTSC available.
Add to CompareWired for 16 reader iStar Ultra, Tie Wrap, 16 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation
Add to Compare75W 2U Power Supply/Battery Charger Provides DC power for LifeSafety applications Designed to fit neatly into standard 19” equipment racks, the streamlined cabinetry and exceptional features combine to significantly reduce installation and service costs Comes equipped with LED indicators that indicate current status Accepts an optional remote management device providing remote monitoring, remote battery testing, along with many other capabilities Removable terminal strips for field wiring Input and output surge suppression Automotive blade fuses for improved reliability Enclosed in a 16 gauge steel 2U rack mount chassis
Add to CompareDSX-1040NV is a replacement processor with nonvolatile memory that provides a layer of resiliency to any existing DSX system. The processor will retain its memory and allow a controller to be immediately operational upon power up without the need for a download from the WinDSX Communications Server. The DSX-1040NV processor can be installed on all DSX-1040 Series and all DSX-1022 controllers. In addition, this processor can be installed on any or all Slave Controllers in the same location to provide even further operational resiliency.
Add to Compare