Access Control Accessories  (1,498)

Suprema DM-20 provides secure door control of up to 4 doors via encrypted communication and also contains two Wiegand  reader interfaces for use with 3rd party readers. Combined with Suprema devices, it provides ability to design and implement a centralised access control system with up to 32 doors and up to 8 biometric devices through daisy chain configuration.

Combinable with Aperio® L100 AL580 and AL581 locks For FIN and SCAND profiles For standard doors Optionally available with PINpad

The SALTO Portable Programmer Device is the messenger between the computer and the lock. The SALTO PPD has a multilingual interface. Main features and functions: initialise doors; collect audit trail; update locks (door profile & internal clock); door diagnostic; emergency opening.

ASSA ABLOY - Aperio® Knob Tool for knob.

Combinable with Aperio® L100 locks For all EURO, FIN and SCAND profiles For standard and narrow profile doors Optionally available with PINpad

The LNL-400X-CE220 is power-limited supply/charger that converts a 230 VAC, 60Hz input into a power limited 12 VDC or 24 VDC output.  Includes tamper switch and short circuit protection.  Dimensions including enclosure: 304 x 406 x 114.  

Version for Euro-, Swiss-, Scand-, Scand-Thumbturn, French- and Blind-Profiles Cover fixed on the Mounting plate

Basic plate with electronic and mechanical parts Version for Euro-, Swiss-, Scand-, Scand-Thumbturn, French- and Blind-Profiles

ASSA ABLOY - Aperio® Spare L-shape or U-shape handle with fixing screw.

Suprema Lift I/O is a purpose built expansion module designed for elevator floor access control. Combined with a Suprema device and BioStar software, a single module can securely control up to 12 floors via encrypted connection. It can be linked in daisy chain configuration up to 10 devices for control of 120 floors. It features RS-485 Secure communication and highly customisable user access.

A high efficiency, offline switch mode, dual voltage power supply battery charger designed to provide both iSTAR Ultra system power, and lock power for a complete 16-door setup Capable of providing multiple power outputs and featuring user selectability for 12 or 24V DC on the lock supply, the wall mount unit is configured in a painted steel, locking enclosure with tamper switch and integral battery space

DSX DSX-400DL door latch module allows the user to unlock with a card read, latch the door open with a second card read and to re-lock (put to time zone) the door with a third card read. Only users with the appropriate linking level will perform this function. Non-authorized users have normal access through the door.

OM-120 is a multiple output extension module which controls up to 12 output relays. It can be used as elevator controller with BioStar 2 system. Max. 31 units can be connected to a master device via RS485 daisy chain. OM-120 can also support anti-passback zone and fire alarm zone features. Features 12 output relays per unit Controls max. 192 floors per elevator Preset alert for alarms in APB zones Elevator groups can be added to a certain fire alarm zone Terminating resistance for RS-485 connections 

A small metal enclosure with tamper switch Up to one input or output module

With eight output PTC Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

The LNL-400X-CE220 is power-limited supply/charger that converts a 230 VAC, 60Hz input into a power limited 12 VDC or 24 VDC output.  Includes tamper switch and short circuit protection.  Dimensions including enclosure: 610x 457 x 114.  Can accommodate up to 6 Lenel Access Control Modules.  Surge protected outputs.  Thermal overload protection and short circuit protection.

Variety of finishes.

With eight output PTC Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

DSX Intelligent Controllers are independent processing 2 door packages designed to be cost effective building blocks that allows expansion in a scalable manner. Up to 8 doors can be controlled from 1 enclosure for an efficient space saving package. The controllers are strategically placed throughout the customer location connected together with a two twisted pair cable. Each Controller operates as a fully intelligent and independent control panel that retains all data necessary for system operation in its own RAM.

The DSX-USB Communications Interface is a simple yet rugged USB converter. This port powered device connects to any 2.0 USB Port through the supplied cable. The module provides an RS-232 output including DTR and a simultaneous RS-485 4 wire output.This module is protocol independent and can be used for a variety of applications and software not just DSX. The DSX-USB is built DSX tough with a rugged housing and all of the over-voltage surge protection you expect in a DSX product. Complete with removable terminal block and status LEDs, this USB Comm Interface has a DSX Edge.Single Channel USB to RS-232 or RS-485 for Master or Slave communications. This new module can provide the RS-232 required for a 1040 Series Master Controller or Dial-up Modem at the Comm Server. The RS-232 has optional DTR for modem use. The RS-485 output can be used for a 1020 Series Master Controller and all DSX Slave Communications used with IP Gateway.The DSX-USB can be used in conjunction with a DSXMCI to perform a short haul providing a 4 wire RS-485 connection that can be used with 2 twisted pair cable up to 4000'.Key features:USB to RS-232 with DTRUSB to RS-485 4 wireRemovable Terminal BlocksPort PoweredUSB 2.0 CompatibleOver Voltage Surge ProtectionProtocol IndependentCommunication Status LEDs 

Variety of finishes.

Steel

Made of satin stainless steel.

Variety of finishes.

Made of satin stainless steel.

The SALTO Monitored Linear Power Supply units PB212S is a monitored linear power supply designed to work with one SALTO door controller at 220 Volts.

Variety if finishes.

DSX-TDM are Time Display Modules that are designed to work specifically with the DSX system. They will display the system time that is being recorded when card holders use their cards. Typically used with the Time and Attendance feature in WinDSX.

Made of satin stainless steel.

SALTO BioCote protected products are suitable for use in many commercial environments including hospitality, leisure, food, catering, laboratory, and healthcare sectors. BioCote is an antimicrobial agent containing silver which is engineered to provide continuous, built-in protection on the products surface. It works by binding with microbes and damaging their cells in a number of ways, disrupting their normal functions and preventing them from reproducing.

Wired for 16 reader iStar Ultra, Tie Wrap, 16 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Intelligent 2 Door Controller is used where the expansion capability of the 1040 Series is not required. Great for 2 doors physically remote from other controllers in the system such as parking garage or elevator cabs.

DSX DSX-220TX card reader cable noise filter can be used to clean up dirty pairs of Elevator Travel Cable or to extend the distance between a reader and a controller.

BioMini SDK is suitable for applications where fingerprint enrollment and recognition can be done on PC or network based systems with Suprema USB fingerprint scanners (BioMiniPlus, BioMini, SFU500 and SFU300).

DP485 RS-485 Data Surge Protection Module typically used in pairs to isolate an RS-485 underground or overhead cable run. RS-485 5V Data Communication Protection Response Time <10nsec. / Max Speed – 1.5Mhz / Clamp Voltage + 11.7V

DSX DSX-220RX card reader cable noise filter can be used to clean up dirty pairs of Elevator Travel Cable or to extend the distance between a reader and a controller.

DSX-TDM5 are Time Display Modules that are designed to work specifically with the DSX system. They will display the system time that is being recorded when card holders use their cards. Typically used with the Time and Attendance feature in WinDSX. 

3546-8NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.

3546-7NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.

DP232 RS-232 Data Surge Protection Module typically used in pairs to isolate an RS-232 underground or overhead cable run. RS-232 12V Data Communication Protection Response Time