Access Control Accessories  (1,239)

Save time on-site Prepare doors efficiently Ensures consistent, accurate installations

Reader cable 10 core CR9540 10m roll.  Conductor resistance 8.55 Ohms/km.  6.2mm in diametre.

CAT5 data cable external 305m boxed reel.  6mm diametre.  Conductor resistance 93.8 Ohms/km.  

CAT5 data cable 305m boxed reel.  6mm in diametre.  Conductor resistance 93.8 Ohms/km.

GT-7043 is a PowerCheck interface/charger & charger.

GT-7044 is a PowerCheck charger.

GT-7046 is a PowerCheck interface/charger & charger & charger (triple nest).

GT-7054 PK-3001 is a 1-37-4 driver handle with bit.

Morse Watchmans Tamper Proof Key Ring 1.5" x 2" incorporate ease-of-use, a tamper-proof locking mechanism and unique identification system while offering the flexibility to add or remove keys without destroying the more expensive ring. It has a replaceable hub technology that allows to re-use the tamper proof key ring and replace the hub at a fraction of the cost.

Spare standard centre bracket for Functional 97 Series of pull door handles.

Enables existing sites to retrofit PaxLock Pro The cover plate discreetly hides any remaining holes or markings, allowing to save time and money on refurbishment

Paxton Access 900-056 is a Scandinavian profile cover plate kit, 105mm.

Parabit 600-10001 is a door hardware 22/4 Plenum.

Parabit 200-10039 is a chrome plated conduit with mount flanges.

Reader cable 10 core CR9540 25m roll.  Conductor resistance of 8.55 Ohms/km. 6.2mm in diametre.

GT-7047 is a PowerCheck charger & charger & charger. (triple nest)

Fixing Kit for doors 55-85mm Wide

Spare cranked centre bracket for Functional 97 Series of pull door handles.

Morse Watchmans GT-7045 is a PowerCheck Charger & Charger (Double Nest) (5003)

Plug removable connector - 5 position.  Green, male.  Bag of 5.

The ACS5000-DB dual reader expansion board provides two additional Wiegand reader inputs to the Brivo ACS5000 series control panels. Each reader node (input) provides (1) form C (SPDT) output relay for lock power switching, (1) dedicated request to exit input, (1) dedicated door position switch input, (2) auxiliary inputs, and (2) auxiliary Form C (SPDT) output relays.

Enclosure tamper switch. 

AES Encryptor for ScramblePad or MATCH2, for installation integral to ScramblePad or MATCH2.  Requires companion Master or Expansion Encryptor at/in Digi*Trac Controller.  Powered from Keypad power bus.  128 bit AES Rinjdael encryption.

Heavy duty relay.  Plugs into motherboard of following controllers: SL1, SL1+, SL24+, M2V5, PS2, M2V6, M8.  Medium duty relay also available: MDR.

Allows to connect locking accessories, such as a door opener, a card reader, etc 6 m long Suitable for the EL648, EL574 and EL577 locks

AES Encryptor for ScramblePad or MATCH2, for installation integral to Digi*Trac Controller.  Requires companion ENC-R Remote Encryptor at/in each ScramblePad or MATCH2.  Powered from Keypad power bus. 128 bit AES Rinjdael encryption.

ES Encryptor for ScramblePad or MATCH2, for installation integral to Digi*Trac Controller.  Requires companion ENC-R Remote Encryptor at/in each ScramblePad or MATCH2.  Provides four additional channels to ENC-M4 in/at controller (required).  Powered from Keypad power bus. 128 bit AES Rinjdael encryption.

Designed for ships or particularly heavy doors with sliding arms Recommended door maximum weight is 160 kg and maximum width is 1600 mm Only to be used with DC195 sliding arm Adjustable closing force size EN 6-7

Custom Piezo Keypad 1x5 is used for fuel dispensers.

The WiFi adapter for Inception controllers provides a convenient wireless connection option. With two modes of operation, the WiFi adapter can act as a handy technician’s service tool or serve as a permanent wireless connection to an available onsite wireless network. 1. Wireless Access Point mode allows installers to establish a wireless connection directly to the Inception controller. This avoids the need to find an IP address or connect to the client’s local network. In this mode the WiFi adapter can be used as a service tool, allowing the installer to configure/perform maintenance on site and simply remove the WiFi adapter when done. 2. Client Mode allows Inception to connect to an existing WiFi network for a permanent local network/Internet connection. The WiFi adapter is supplied with an antenna extension cable and magnetic base to allow the antenna to be located on the outside of the enclosure.

A short-body lock set with one key supplied Compatible with several Bosch enclosures

Verkada BR13-HW is a wired recessed mount door contact - 5 pack

Designed to accommodate ACS6100 controller, door and I/O boards in International installations Supports up to 8 doors Non-locking cabinet DC power supply included Indoor rated Mounting hardware for controller, door and I/O boards included Does not support door power CE, UL294

A long-body lock set with two key supplied Compatible with several Bosch enclosures

KB-4000 is a sealed piezo keyboard.

Custom Panel Waste Disposal is used for garbage disposal / waste management systems.

KB-4000P is a sealed Piezo keyboard with pointer.

Custom Output Switch is used at water management and correctional facilities.

Custom Keypad Gas Pumps act as POS for gas pumps.

Custom Panel is integrated with LCD for the mining industry.