Access Control Accessories  (1,239)

Door contact automatically rings a chime or bell when the door is opened. Can be used with any wired chime or with the Libra wirefree chime system when used with the Chime extender kit (D357).

Allows to connect locking accessories, such as a door opener, a card reader, etc 6 m long Used with CAN-channel

Allows to connect locking accessories, such as a door opener, a card reader, etc 0.75 m long Suitable for the EL490, EL654 and EL655 locks

Allows to connect locking accessories, such as a door opener, a card reader, etc 0.75 m long Suitable for the EL402, EL654 and EL655 locks

ABLOY 0029 is a striker plate for flushed interior doors.

For the 4238 roller latch To be used with flushed doors

Made of surface hardened steel, which is galvanized and powder coated For right-facing doors 12 mm hole for a shackle Suitable for padlocks with shackle diameter 8mm or less

Made of surface hardened steel, which is galvanized and powder coated For left-facing doors 12 mm hole for a shackle Suitable for padlocks with shackle diameter 8mm or less

Made of surface hardened steel, which is galvanized and powder coated For right-facing doors 21 mm hole for a shackle Suitable for padlocks with shackle diameter 15mm or less

Made of surface hardened steel, which is galvanized and powder coated For left-facing doors 21 mm hole for a shackle Suitable for padlocks with shackle diameter 15mm or less

Concealed, for aluminium doors

Allows to connect locking accessories, such as a door opener, a card reader, etc 6 m long Suitable for the EL490 and EL590 locks

Has a linear and practically unmoving adjustment mechanism The adjustment mechanism can be used to optimize sealant in all conditions Fits two bolts

Made of surface hardened steel, which is galvanized and powder coated For left-facing doors 18 mm hole for a shackle Suitable for padlocks with shackle diameter 14mm or less

Suitable for both left- and right-facing doors 12 mm hole for a shackle Suitable for padlocks with shackle diameter 8mm or less

concealed

The R400 MA comes with 24 individual beam paths. The large number of beam paths gives even greater accuracy of detection and reduces the chances of false activations of the barrier arms. The Fastlane R400 MA features anti-crawl beams to detect anyone trying to gain entry by crawling under the barrier arms. This unit features interchangeable vanity tops, giving a virtually unlimited choice of materials, to easily blend the unit in to the fabric of the building. Integral card reader mounting options are available to give the most discreet overall finish possible. The use of Cat 5 interconnections between the pedestals simplifies and speeds up installation.

The R400 AS comes with 24 individual beam paths. The large number of beam paths gives even greater accuracy of detection and reduces the chances of false activations of the barrier arms. The Fastlane R400 AS features anti-crawl beams to detect anyone trying to gain access by crawling under the barrier arms. This design features interchangeable vanity tops. Integral card reader mounting options are available to give the most discreet overall finish possible. The use of Cat 5 interconnections between the pedestals simplifies and speeds up installation. Fastlane plus R400 AS has six modes of operation: Normally Open (Barriers retracted), Normally Closed (Barriers extended), X Mode (Barriers partially extended), Optical Mode (Barriers permanently retracted), Lane Closed Mode (Barriers permanently extended) and Auto Mode (Barriers extended).

Fastlane plus, from Integrated Design,  is the very latest in high tech entrance control systems, combining the best of optical turnstile and physical barrier technology. Optical turnstile with integrated barriers  Stops all unauthorised entry attempts Fast throughput Physical and visual deterrent Compact aesthetic design Compliant with UK Disabilities Act

The Fastlane R300 MA has been designed to provide a similar level of security as a traditional 1/2-height turnstile but with all the convenience and aesthetic advantages synonymous with the Fastlane brand. This unit features interchangeable vanity tops, giving a virtually unlimited choice of materials, to easily blend the unit in to the fabric of the building. Integral card reader mounting options are available to give the most discreet overall finish possible. The use of Cat 5 interconnections between the pedestals simplifies and speeds up installation. Fastlane plus is designed to ensure only one person gains access for each authorised card presented. The system uses active infra-red beams to create an invisible electronic field between two pedestals.

Resetable.

Resetable.

The Fastlane Channel provides a rounded symmetrical look for customers who require a discreet security presence. The stainless steel ends can be painted or produced in various types of material, such as stone, metal and wood, to complement different interior design concepts. The Channel is supplied with a clear text display for user instructions and with a quick release base for easy temporary removal.

The Fastlane Elliptical is the biggest Fastlane pedestal design and is intended to provide a longer length enclosure with extra style for clients who require a more imposing, yet very contemporary physical presence. With its steel mesh or black side panels and aerodynamic shape, the Elliptical is ideal for contemporary office building reception areas, high tech companies and other early adopters who shape future trends. The IR beams have 3 different positions allowing the enclosures to be positioned in a step or V formation to give greater architectural flexibility in the positioning of the pedestals.

The Fastlane R400 OT has been designed with security and architectural flexibility in mind. The R400 OT comes with 12 individual IR beam paths for unsurpassed detection performance and includes anti-crawl beams as standard. The unit features interchangeable vanity tops and integral card reader mounting options, allowing the use of a virtually unlimited choice of materials to easily blend the pedestal into the fabric of the building design. The Fastlane R400 OT utilizes Cat 5 interconnections between the pedestals to simplify and speed up installation.

The Fastlane Clearstyle provides the most discreet form of security possible and exceeding the most demanding architects’ design requirements. Clearstyle blends right in to the fabric of the building, delivering the perfect combination of security and aesthetics. The construction is a combination of stainless steel and clear Perspex panels. The stainless steel end sections can be provided in a variety of finishes to ensure a perfect match with the building’s surroundings.

Heavy duty, high impact, green domed, on stainless steel plate

44/45mm solid hardwood/lamelled core and exterior facings. Quality timber facing veneers: Ash, Mahogany, Oak etc. Hardwood lippings are fitted to all four edges. Min 95mm x 70mm solid hardwood section. Hinges: 3no, Heavy duty, fire rated, stainless steel hinges. Single point locking with appropriate level/door furniture.

54mm solid hardwood/lamelled core and exterior facings. 1 hour fire resistance can be achieved with the inclusion of the appropriate intrumescent seals. Quality timber facing veneers: Ash, Mahogany, Oak etc. Hardwood lippings are fitted to all four edges. Min 95mm x 70mm solid hardwood section. Solid stainless steel continuous hinge. Concealed lock keep reinforcement providing further protection to the locking point. No 2 Hinge bolts providing greater strength and protection to hinge side of the door frame.

Door 68mm solid hardwood/lamelled core with two steel sheet inserts and exterior timber facings. 1 hour fire resistance can be achieved with the inclusion of the appropriate intrumescent seals. Quality timber facing veneers: Ash, Mahogany, Oak etc. Hardwood lippings are fitted to all four edges. Min 120mm x 70mm solid hardwood section. Hinges - 4no. Heavy duty, fire rated, steel hinges. Concealed lock keep reinforcement providing further protection to the locking point. No 3 Hinge bolts providing greater strength and protection to hinge side of the door frame.

Suitable for external and internal doors CE certified with sliding arm Adjustable closing force size EN 1-6 with sliding arm according EN 1154 Back check (BC) as a standard feature Adjustable latching and back check starting angle by grooved spindle Easy adjustment of arm height (14 mm) Two pressure relief valves to protect against overload Maximum door weight 120 kg and door width 1400 mm with sliding arm installation Easy to install

Suitable for external and internal doors CE certified with standard arm Adjustable closing force size EN 3-5 with standard arm according EN 1154 Back check (BC) as a standard feature Adjustable latching and back check starting angle by grooved spindle Easy adjustment of arm height (14 mm) Two pressure relief valves to protect against overload Maximum door weight 100 kg and door width 1250 mm Easy to install

Suitable for external and internal doors CE certified with sliding arm Adjustable closing force size EN 1-4 with sliding arm according EN 1154 Back check (BC) as a standard feature Adjustable latching and back check starting angle by grooved spindle Easy adjustment of arm height (14 mm) Two pressure relief valves to protect against overload Maximum door weight 80 kg and door width 1100 mm with sliding arm installation Easy to install

Can be used with height-adjustable sliding rail or standard arm Suitable for external and internal doors CE certified with sliding arm and standard arm Adjustable closing force size EN 1-4 (DC240DA: EN 2-4) with sliding arm according EN 1154 Adjustable closing force size EN 2-6 with standard arm according EN 1154 Back check (BC) as a standard feature Adjustable latching and back check starting angle by grooved spindle Easy adjustment of arm height (14 mm) Two pressure relief valves to protect against overload Maximum door weight 120 kg and door width 1400 mm with standard arm installation Maximum door weight 80 kg and door width 1100 mm with sliding arm installation Easy to install

Can be used with integrated concealed mounting plate, suitable for fire and smoke protection doors Can be used for left and right-handed doors Axis height-adjustable up to 14 mm Thermodynamic valves for consistent performance For heavy door applications Closing speed, latching speed and backcheck adjustable via front facing regulating valves Variable adjustable closing force Opening angle up to 180° Certified in compliance with EN1154 Suitable for fire and smoke protection doors For single action doors with a width of up to 1600mm

Certified in compliance with EN 1154 For single action doors up to 1100 mm wide Can be used for left and right-handed doors Closing speed, latching speed and backcheck continuously adjustable using regulating valves Thermodynamic valves for consistent performance Closing force configurable Opening angle up to 180°

Can be used with height-adjustable sliding rail or standard arm Suitable for external and internal doors CE certified with sliding arm and standard arm Adjustable closing force size EN 2-4 with sliding arm according EN 1154 Adjustable closing force size EN 2-6 with standard arm according EN 1154 Back check (BC) as a standard feature Delayed action Adjustable latching and back check starting angle by grooved spindle Easy adjustment of arm height (14 mm) Two pressure relief valves to protect against overload Maximum door weight 120 kg and door width 1400 mm with standard arm installation Maximum door weight 80 kg and door width 1100 mm with sliding arm installation Easy to install

Based on inductive loop technology, TRACK systems are superior vehicle identification systems designed to identify priority-moving vehicles. By fixing the durable, water resistant transmitter to the chassis of the vehicle, and connecting the receiver to the conventional loop buried in the road surface you are able to identify vehicles at high speed without any performance irregularities. As the vehicle passes over the road loop, the transmitter transmits a low power signal that is received and verified by the receiver, which in turn responds with the appropriate output.

Wall mounted.

28v DC contact rating, coverage single beam 7.7 m 6 degrees, current consumption 40-60 mA available