Electronic Door Locks & Locking Devices  (1,584)

Reversible fail safe/fail secure electric lock Up to 650kg holding force Suitable for double action doors Euro cylinder provision Suitable for vertical mounting Tested for 1,000,000 cycles Lock status monitoring

To suit mortice night latch

Boxed

CyberLock CL-IPS02 30mm cylinder is a custom modification to a standard cam lock. It is currently used to secure the electronics access door on a pay telephone. Its outer shell is made of nickel-plated brass. The core’s electronics are encased in a nickel-plated steel shell. The body threads are 19mm in diameter and have 1mm pitch. The cylinder tendon is 8mm in diameter and has an .8mm pitch. Both the body and the tendon threads are double-D style.

24v DC ANSI monitored complete with SS short/long faceplate and 25mm extension lip Fail Secure/PTO For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

75mm extension lip

25mm extension lip

Cobalt-Mini housing with tape

Cobalt dress plate with tape

Left handed electric strike Fixed jaw Fail secure EURO style strike Gasket seal High resistance to dust and outside weather conditions Manual hold-open function Built-in Metal Oxide Varistor to protect against electrical spikes

Symmetrical strike, reversible faceplate Holding force 3250 N Terminal block 4 mm adjustable roller Dual voltage Built-in back EMF protection

Rim Release, Fail-Secure, 800lbs, 15, 12, 149 x 32

To convert from mortice, inward open

To convert from mortice, inward open

To convert from mortice, outward open

To convert from mortice, outward open

Include EF-79Kit, 1/2" latch bolt

25

The Alpro EMS 1200 Compact Shearlock is available in Mortice or Surface Mount models (inc. Glass Mount) and offer slimline dimensions whilst maintaining a holding force in shear of 1200kg. Other benefits include built in PCB controller with switch selectable features and plug in 3 metre flying leads.

CL-6P2 CyberLock electronic 6-pin Yale format cylinder is based on the exact dimensions of the mechanical Yale format 6-pin cylinder.

Symmetrical fail safe monitored electric strike Built-in MOV (metal oxide varistor) to protect from electrical spikes Suitable for UPVC doors and multipoint locking Robust stainless steel faceplate Adjustable radial jaw

for 533

Genie slim line specialist vortex surface mount magnetic lock + door status. Built-in early warning pressure sensor and MOV surge protection. Z + L + U brackets available.

The electric strike should be of a type which is unaffected by vibration and offer a minimum 5 years warranty.  Where "Power to Lock" and "Power to Open" functions may be required in the same installation, the electric strike should be interchangeable from either "Power to Lock" or "Power to Open" at site.

Anviz Global's AML270 is suitable for emergency doors, fireproof doors as well as building walkie-talkies and entrance-guard systems. Made from special magnetic materials in adoption of a particular processing technique will not produce excessive magnetic after a long period and the suck board will not be magnetized or cause the reduction of suction force after a long-time use. The products present no mechanic failures, no abrasions, and no noises with a longer service life.Frameless glass door can be installed with an auxiliary frame.

Cable gland, 3m 3 core cable.

Inward door open type

Cable gland, 3m 3 core cable, (gate lock)

Mortice Release, Fail-Secure, 300kg, Brass, 12, 32 x 174 x 32

Adjustable bracket for MS10, MS15, MS20. (L bracket)

Euro cylinder profile cut out in 85mm sq, momentary contact switch, use SB-1 for surface mounting (euro cylinder excluded)

PCSC MLD1200DS electromagnetic lock is increasingly being used in the access control and security industries. Application areas include airports, hospitals, office buildings, and mass transit stations. It is also being used on doors where access is restricted for security reasons or where doors double as an emergency exit. It is designed for dependability and ease of installation. The electromagnetic lock allows concern-free use in any access control environment.

Low budget

Double bracket for short double to be used with Z bracket

Works with Net2 or standalone IK10 impact rated Wireless access control Simple upgrade path from standalone Compatible with DIN standard locks EN179 Certified for emergency exits and FD30, 60 and 90 certified for fire doors

Mortice Release, Fail-Secure, 300kg, Brass, 12, 25 x 160 x 32

Inward door open type

Cable gland, 3m 3 core cable, (gate lock)

Fail safe electric lock operating under sideload (225kg) Up to 650kg holding force Suitable for double action doors 60 minutes fire tested under EN14846 Lock and door status monitoring

Double adjustable transom bracket