Electronic Door Locks & Locking Devices  (1,640)

Symmetrical fail safe monitored electric strike Built-in MOV (metal oxide varistor) to protect from electrical spikes Suitable for UPVC doors and multipoint locking Robust stainless steel faceplate Adjustable radial jaw

for 533

Genie slim line specialist vortex surface mount magnetic lock + door status. Built-in early warning pressure sensor and MOV surge protection. Z + L + U brackets available.

Cable gland, 3m 3 core cable, (gate lock)

The electric strike should be of a type which is unaffected by vibration and offer a minimum 5 years warranty.  Where "Power to Lock" and "Power to Open" functions may be required in the same installation, the electric strike should be interchangeable from either "Power to Lock" or "Power to Open" at site.

Genie mortice heavy dutry strike.

PCSC MLD1200DS electromagnetic lock is increasingly being used in the access control and security industries. Application areas include airports, hospitals, office buildings, and mass transit stations. It is also being used on doors where access is restricted for security reasons or where doors double as an emergency exit. It is designed for dependability and ease of installation. The electromagnetic lock allows concern-free use in any access control environment.

Anviz Global's AML270 is suitable for emergency doors, fireproof doors as well as building walkie-talkies and entrance-guard systems. Made from special magnetic materials in adoption of a particular processing technique will not produce excessive magnetic after a long period and the suck board will not be magnetized or cause the reduction of suction force after a long-time use. The products present no mechanic failures, no abrasions, and no noises with a longer service life.Frameless glass door can be installed with an auxiliary frame.

Low budget

Double bracket for short double to be used with Z bracket

Inward door open type

Left sashlock release. Grey finish.

Cable gland, 3m 3 core cable.

Fail safe electric lock operating under sideload (225kg) Up to 650kg holding force Suitable for double action doors 60 minutes fire tested under EN14846 Lock and door status monitoring

Light to medium duty. Available in brass or chrome. Grey finish.

Double adjustable transom bracket

for the Z bracket

ANSI-style monitored electric strike Adjustable between fail safe and fail secure Supplied with both long & short faceplate Adjustable jaw Built-in metal oxide varistor Upto 750 kg holding force

Fail safe electric lock operating under sideload (225kg) Up to 650kg holding force Suitable for double action doors 60 minutes fire tested under EN14846 Lock and door status monitoring

Works with Net2 or standalone IK10 impact rated Wireless access control Simple upgrade path from standalone Compatible with DIN standard locks EN179 Certified for emergency exits and FD30, 60 and 90 certified for fire doors

for the Transom bracket

Light to medium duty

Light To medium duty

Mortice Release, Fail-Secure, 300kg, Brass, 12, 32 x 174 x 32

for MS10, MS15 & MS20

Inward door open type

Cable gland, 3m 3 core cable, (gate lock)

For Z bracket

Euro cylinder profile cut out in 85mm sq, momentary contact switch, use SB-1 for surface mounting (euro cylinder excluded)

Armature mounting plate, surface for MS10, MS15 & MS20.

Double cover

for MS10

Mortice Release, Fail-Secure, 300kg, Brass, 12, 25 x 160 x 32

(M43)

Delay action. Light to medium duty. Grey finish.

Right sashlock release. Grey finish.

Adjustable bracket for MS10, MS15, MS20. (L bracket)

for single doors

Double rear L bracket for centre hung aluminium doors

for MS20