Access Control Accessories  (1,498)

Stainless steel faceplate Requires 12-VDC power to illuminate exit button Indoor use only

Provides a release device for doors secured with a magnetic lock or electric strike Lighted Exit push buttons Requires 12-VDC power to illuminate exit button. Stainless steel faceplate

Colour: Black colour Material: Fireproof board with aluminum frame Dimension: 525 x 420 x 190 mm Power Supply: 110 - 250 VAC Ethernet: 1 x 10/100 Mbps RJ45 Suggested carried products: 1 apartment door station, 1 villa door station, 2 indoor monitors, and 1 PoE switch.

Available Model E216 Series E416 Series A416 Series

Vandal resistant stainless steel faceplate and button cap Piezoelectric switch Selectable illumination status (red, green) Requires 12 to 24 Volt DC power 1211-090 - Mounts into a single-gang electric box 1211-091 - Mullion mount

Available Model S215 (Flush Mount) S615 (Flush Mount)

Non-handed for regular, top jamb and parallel arm mount applications Supplied with fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Designed for end users looking for value and versatility in a rugged design making this series suitable for a wide variety of applications

Non-handed for regular, top jamb and parallel arm mount applications Supplied with fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Designed for end users looking for value and versatility in a rugged design making this series suitable for a wide variety of applications

Non-handed for regular, top jamb and parallel arm mount applications Supplied with fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Designed for end users looking for value and versatility in a rugged design making this series suitable for a wide variety of applications

Full plastic cover available (sold separately) Supplied with fully threaded wood screws, machine screws and thru-bolts for 1-3/4” thick doors 10-year limited warranty

Full plastic cover available (sold separately) Supplied with fully threaded wood screws, machine screws and thru-bolts for 1-3/4” thick doors 10-year limited warranty

Full plastic cover available (sold separately) Supplied with fully threaded wood screws, machine screws and thru-bolts for 1-3/4” thick doors 10-year limited warranty

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Non-handed for regular, top jamb and parallel arm mount applications Supplied with fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Designed for end users looking for value and versatility in a rugged design making this series suitable for a wide variety of applications

Full plastic cover available (sold separately) Supplied with fully threaded wood screws, machine screws and thru-bolts for 1-3/4” thick doors 10-year limited warranty

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

closing force: 3 for single or double action doors tempered steel shaft adjustable closing speed adjustable latch action low cement trough Stainless steel trim plate

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

Two non-critical adjusting valves (sweep and latch) control closing speed Hold open arm available on adjustable closers Supplied with machine screws, fully threaded self-reaming/tapping screws, sleeve nuts and thru-bolts for 1-3/4" thick doors 10-year limited warranty Available with a full plastic cover or a slim plastic cover (specify “S” suffix) Available with optional delayed action adjusted with separate independent valve. Delays door closing to allow unimpeded passage through the opening. Specify "D" suffix Non-handed for regular, top jamb and parallel arm mount applications

closing force: 3 for single or double action doors tempered steel shaft adjustable closing speed adjustable latch action with hold-open at 105° (not for fire doors) low cement trough Stainless steel trim plate

closing force: 3 for single or double action doors tempered steel shaft adjustable closing speed adjustable latch action with hold-open at 90° (not for fire doors) low cement trough Stainless steel trim plate

closing force: 3 for single or double action doors tempered steel shaft adjustable closing speed adjustable latch action low cement trough Stainless steel trim plate

Universal hold open magnet with swivel armative. Integral test switch. Surface and flush mounts available.

T10 pedestal stand is a sturdy, free-standing mount—made of steel that lets you install a station at the correct location when you don’t have a wall or gatepost to attach it to. It can also host the rain hood for outdoor applications (rain hood need to be ordered separately).

SA-027WQ is a 7 day timer with enclosed terminals for a safer installation. Adjustable output time. Programmable security code. 16 Schedules including daily, weekly, weekends, etc.

with slide arm adjustable closing force: 2-4 adjustable closing speed adjustable latch action adjustable opening damping grey straight trim plate

with scissor arm closing force: 2-4 adjustable closing speed adjustable latch action

with scissor arm closing force: 3 adjustable closing speed adjustable latch action