Access Control Accessories  (1,597)

Allows to connect locking accessories, such as a door opener, a card reader, etc 10 m long

Mechanical hold-open device for doors which sometimes need to be secured in the open position Simple fitting to guide rail G896

Integrated mechanical coordinator for double leaf doors Correct closing sequence guaranteed for double leaf doors, inactive leaf closes before active leaf starts to close Active leaf could stay open in any selected angle up to 150° when inactive leaf is opened Standard mounting position on hinge side and non-hinge side Non-hinge side mounting requires hook arm G120 Axis continuously height adjustable up to 14 mm Large range of applications Suitable for fire and smoke protection double leaf doors, hinge distance 1350-2500 mm, non-hinge side installation hing distance 1400-2800 mm

Height-adjustable by 2 mm for tolerance Concealed fastening screws

Identify vehicles by their license plate Easily manage and assign credentials within Brivo Access Automatic capture and storage of video for every entry Supports a backup reader in the event a license plate is obscured, missing or not registered Eliminate keyfobs, tickets, and codes to enter a garage by using a vehicle license plate as a credential Automate vehicle entry Improve the overall access experience Faster and more efficient gate passage Alerts for non authorised vehicles

For flushed doors Can be combined with 428 security lock

For flushed interior doors Suitable for Scandinavian interior door locks

Small size guide rail for DC850 and DC870, can be used with A184 hold-open device and A182 opening damper For standard applications

Helps to prevent the door and door handle from hitting a return wall Simple fitting into guide rail Adjustable up to an opening angle of max. 110°

Concealed mechanical coordinator with one electromechanical hold-open device for double leaf doors Guide rail is certified in compliance with EN1155 and EN 1158, size 3-6 Fulfils barrier-free building requirements (EA / CEN TR 15894) Suitable for fire and smoke protection double leave doors, hinge distance 1350-2500 mm DIBt approval with different smoke detection systems Possible to keep both door leaves open by using only one electromechanical hold-open device Hold-open angle adjustable between 70° - 120° Continuously adjustable holding force Large range of applications

Concealed guide rail with integrated electro-mechanical hold-open device on both sides and door coordinator based on wedge system Guide rail is certified in compliance with EN1155 and EN 1158, size 3-6 Fulfils barrier-free building requirements (EA / CEN TR 15894) Hold-open angle adjustable between 70° - 120° Continuously adjustable holding force Large range of applications.

ABLOY DC112 is an angle mounting plate for FD110 and FD111 coordinators..

The Fastlane Elliptical is the biggest Fastlane pedestal design and is intended to provide a longer length enclosure with extra style for clients who require a more imposing, yet very contemporary physical presence. With its steel mesh or black side panels and aerodynamic shape, the Elliptical is ideal for contemporary office building reception areas, high tech companies and other early adopters who shape future trends. The IR beams have 3 different positions allowing the enclosures to be positioned in a step or V formation to give greater architectural flexibility in the positioning of the pedestals.

Allows to connect locking accessories, such as a door opener, a card reader, etc 10 m long Suitable for the EL432-434 and EL532-534 locks Used with CAN-channel

Allows to connect locking accessories, such as a door opener, a card reader, etc 10 m long Suitable for the EL402 and EL502 locks

Allows to connect locking accessories, such as a door opener, a card reader, etc 10 m long Suitable for the EL490 and EL590 locks

Has a linear and practically unmoving adjustment mechanism The adjustment mechanism can be used to optimize sealant in all conditions Fits a single bolt

Made of surface hardened steel, which is galvanized and powder coated For left-facing doors 21 mm hole for a shackle Suitable for padlocks with shackle diameter 15mm or less

ABLOY A116 is an angle mounting plate for G460-G464 fire door closing systems.

Helps to prevent the door and door handle from hitting a return wall Simple fitting into guide rail and continously adjustable Can be used only with G464 on active leaf

concealed

The R400 AS comes with 24 individual beam paths. The large number of beam paths gives even greater accuracy of detection and reduces the chances of false activations of the barrier arms. The Fastlane R400 AS features anti-crawl beams to detect anyone trying to gain access by crawling under the barrier arms. This design features interchangeable vanity tops. Integral card reader mounting options are available to give the most discreet overall finish possible. The use of Cat 5 interconnections between the pedestals simplifies and speeds up installation. Fastlane plus R400 AS has six modes of operation: Normally Open (Barriers retracted), Normally Closed (Barriers extended), X Mode (Barriers partially extended), Optical Mode (Barriers permanently retracted), Lane Closed Mode (Barriers permanently extended) and Auto Mode (Barriers extended).

ABLOY EA503 is a door contact for wooden doors.

Allows to connect locking accessories, such as a door opener, a card reader, etc 0.75 m long Suitable for the EL490, EL654 and EL655 locks

ABLOY EA240 is 9 wires, 100 m long cable.

Has a linear and practically unmoving adjustment mechanism The adjustment mechanism can be used to optimize sealant in all conditions Fits two bolts

ABLOY 0029 is a striker plate for flushed interior doors.

ABLOY 0034 is a striker plate for flushed solid doors.

Made of surface hardened steel, which is galvanized and powder coated For right-facing doors 12 mm hole for a shackle Suitable for padlocks with shackle diameter 8mm or less

Made of surface hardened steel, which is galvanized and powder coated For right-facing doors 18 mm hole for a shackle Suitable for padlocks with shackle diameter 14mm or less

Mechanical hold-open device for doors which sometimes need to be secured in the open position Simple fitting to guide rail G892

Link arm with removable joint for rack & pinion door closers Not for fire doors

ABLOY A104 is an angle mounting plate for DC193 and DC195 sliding arms.

ABLOY A115 is a mounting plate for G195 sliding arm and G460-G464 fire door closing systems.

ABLOY A120 is a mounting plate for DC200, DC300, DC500 and DC700 door closers.

ABLOY A124 is a mounting plate for DC335 and DC330 door closers.

ABLOY DC113 is an angle mounting plate for DC330 and DC335 door closers.

Rebuilding plate Works with the LC300 lock case

Fulfils barrier-free building requirements (EA / CEN TR 15894) For single action doors up to 1400 mm wide Free-Motion® door closer with free-swing function starting from a door opening angle ≥ 0°, and height adjustable guide rail Certified in compliance with EN 1155/1154, size 3-6 DIBt tested as a hold-open system with various smoke detector systems Suitable for fire and smoke protection doors

Guide rail is certified in compliance with EN1155, size 3-6 Fulfils barrier-free building requirements (EA / CEN TR 15894) Suitable for fire and smoke protection doors For single action doors up to 1250 mm wide DIBt approval with different smoke detection systems Concealed electro-mechanical hold-open device Continuously adjustable holding force Can be used for left and right-handed doors Closing speed and latching speed adjustable from top facing regulating valves Hold-open angle continuously adjustable between 70°- 120° Large range of applications