Access Control Accessories  (1,409)

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

AL1002ULADAJ is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

AL1002ULADA is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

Aritech 3040-W is a panic switch with terminals that activates the SPDT switch. It features red LED with latching LED circuit. The panic switch is UL listed.

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

AL1002ADAJ220 is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

The door openers may only be operated with direct current in line with the rated voltage. Continuous contact (100% duty cycle) is possible Zero-potential feedback contact for signalling whether the door is open or closed Recovery diode for suppressing interfering pulses during the switching process Door opener with normal flat edge plate with bolt cut-out for house and room locks, can be adjusted universally for DIN left and right Door opener is unlocked with voltage. The door remains locked in the event of a power failure Adjustable and fixable door opener latch

2RU Sliding 19” Rack Mountable Drawer Suit 19" Rack with front and back rail mounts Adjustable 600mm Ball Bearing runners to suit rail spacings between 520 - 740mm Universal PCB Mounting Plate and Battery Holders Sturdy metal drawer with sealed base and welded corners Tamper monitored ventilated metal cover Rear Cable Tie Down Tray Supplied with ball bearing runners 3 x 2-Way Circular Cable Entry Knockouts, 35mm or 64mm Supplied with cable entry bushing Ethernet Connection - RJ45 Chassis Mount Mains Power Connection - IEC 240Vac Mains power connector - Fused Assisted Ventilation - Provision for 60mm panel mount fan Mounting positions for all Integriti Controllers, LAN Modules & UniBus Devices Mounting positions for all Concept 3000/4000/5000 Security System Controllers & LAN Modules (Excluding the Intelligent 4-Door Controller) House up to 2 x 7Ah 12V Batteries House up to 2 x 3A Ac transformers or 1 x 3A & 1 x 4A

StellarPro is a powerful embedded system based on the Motorola Coldfire microprocessor. StellarPro is equipped with uClinux embedded operating system. It has one Fast Ethernet port, operating at 10/100 Mbps. StellarPro has 8 RS422/profibus ports, the maximum baud rate of these ports is 19.2 Kbps. StellarPro comes with an SDK, containing a manual on CD-ROM, a comprehensive set of development tools and example programs.

Parabit 300-40002 is a white motion request to exit sensor with 2 Form C relay outputs (N.O. & N.A.).

Genie’s TSV-REX has a robust aesthetic design, halo illumination on touch sensitive mini button. Its relay output comprises of SPDT with 2A contacts.

Parabit 300-40001 is a white motion request to exit sensor with 2 Form C relay outputs (N.O. & N.A.).

Application 1, non handed, maximum door width 930mm, max. door weight 60kg, unit mounted on 'pull' side of door

12 V DC, 60 mA, 65 x 20 x 25, High security module

Application 66, non handed, maximum door width 830mm, max. door weight 45kg, unit mounted on 'push' side of door

Conventional shutter door contact For monitoring shutter, sliding, and garage doors VdS class C/EN 50131-2-6 Grade 3 Tamper surveillance High level of mechanical strength Conventional perimeter protection

TruPortal TP-ADD-2D2R 2-door add-on module with readers offers an IP appliance-based access control system integrated with the TruVision line of video products. Designed for the over-the-counter market, this solution is also ideal for small- to medium-sized commercial buildings. The easy-to-install system features a browser-based interface.

Interlogix TP-ADD-2D is a  2-door expansion board. It  offers an IP appliance-based access control system integrated with the TruVision line of video products. Designed for the over-the-counter market, this solution is also ideal for small- to medium-sized commercial buildings. The easy-to-install system features a browser-based interface.

MTM-REX from Genie has halo illumination on touch sensitive button. It also has SPDT with 2A contacts.

Plenum rated, mid capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS II and REACH compliant

Aritech 3055 panic switch activates the SPDT switch when the user pulls the actuating lever. The 3055 panic switch features a glowing LED for low light visibility. The LED glows green when powered up and turns red upon activation. The panic switch contains a non-latching LED.

Aritech 2507A-L is a wide gap armoured cable contact designed to be installed in commercial and industrial environments where a rugged sealed unit is required. It is ideal for metal doors, overhead doors, fences and gates. It features a high strength extruded aluminum housing and is completely encapsulated in polyurethane potting compound. The 2507A-L also features a SPDT switch.

PCSC PCSC Exit Devices is the illuminated “Press to Exit” button. This heavy duty button is available in two sizes and features a stainless steel backing plate, large red lighted button and “Press to Exit” lettering. It is easy to mount and installation these exit release buttons are available in mullion mount and single gang box configurations. It work with all access control systems and can be configured for initially open or initially closed operations.

Altronix ACM8 converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Memory Protection Battery - replacable.  NiCad battery.  Universal replacement for DIGI*TRAC memory protection.  2 leads solder to motherboard - thereafter replacable without soldering using plug connectors.  Includes nylon tie and adhesive.

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Low capacitance, non-shielded direct burial with water blocking tape barrier, suitable for wet locations Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Plenum rated, low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS II and REACH compliant

CEM ECM/200/000 Ethernet communication module with PSU and enclosure is a serial to Ethernet converter that enables CEM serial communication devices (such as the S600s reader range, InfoProx reader and the DCM controllers), to connect to the AC2000 central system via an Ethernet LAN. The ECM can support a chain of up to 16 RS485 CEM devices connected to a single channel (up to a maximum length of 1.2 km). This provides a cost effective means of connecting a group of serial readers to the AC2000 system from a single Ethernet point.

Aritech 2507AD-L is a wide gap armoured cable contact designed to be installed in commercial and industrial environments where a rugged sealed unit is required. It is ideal for metal doors, overhead doors, fences and gates. It features a high strength extruded aluminum housing and is completely encapsulated in polyurethane potting compound. The 2507AD-L also features a DPDT switch.

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant