Access Control Accessories  (1,113)

Bolt contact in LSN technology For monitoring the closure of doors For connecting to a LSN intrusion control panel VdS class C LSN perimeter protection

Interlogix TP-ADD-2D is a  2-door expansion board. It  offers an IP appliance-based access control system integrated with the TruVision line of video products. Designed for the over-the-counter market, this solution is also ideal for small- to medium-sized commercial buildings. The easy-to-install system features a browser-based interface.

Altronix ACM220 series distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

AL1002ULADA is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

AL1002ADA220 is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

Altronix ACMS8/ACMS8CB are UL listed sub-assemblies designed to be used in Altronix wall and rack mount enclosures. Input power to ACMS8/ACMS8CB is to be derived from eFlow series power supplies. Dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled fuse or PTC protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS8/ACMS8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect featureis individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8/ACMS8CB modules. This feature allows you to distribute the power over more outputs for larger systems.

Conventional surface-mount magnetic contact For release monitoring of windows and doors VdS class B Parallel or head-on surface mounting Conventional perimeter protection

Designed to suit the Emergency Exit Device for the purpose of deterring unintended or malicious activation in public areas Two potential outputs; one for local audible indication, and one for status monitoring (C861203 only) The cover is secured behind the Emergency Exit Device to prevent removal The cover is designed to latch closed so as to make the operation of it a deliberate action Durable polycarbonate cover is easily cleaned, and weather resistant for external use Minimal moving parts Text and graphics will not deteriorate over time

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

Application 1, non handed, maximum door width 930mm, max. door weight 60kg, unit mounted on 'pull' side of door

Closed loop Ideal for steel doors Wide gap deters swinging

Genie’s TSV-REX has a robust aesthetic design, halo illumination on touch sensitive mini button. Its relay output comprises of SPDT with 2A contacts.

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

AL1002ULADAJ is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

The door openers may only be operated with direct current in line with the rated voltage. Continuous contact (100% duty cycle) is possible Zero-potential feedback contact for signalling whether the door is open or closed Recovery diode for suppressing interfering pulses during the switching process Door opener with normal flat edge plate with bolt cut-out for house and room locks, can be adjusted universally for DIN left and right Door opener is unlocked with voltage. The door remains locked in the event of a power failure Adjustable and fixable door opener latch

Aritech 3040-W is a panic switch with terminals that activates the SPDT switch. It features red LED with latching LED circuit. The panic switch is UL listed.

Mounted on door or window frames Extension terminals for connection to wired devices Also doubles as an universal transmitter Tamper protection to prevent unauthorized removal Enables home automation and security systems to turn on/off appliances accordingly Over-The-Air (OTA) firmware update capability (optional) Low battery detection Power magnet allows for an overall side-to-side gap distance of 28mm Randomized supervision signals to check system integrity and troubleshooting Elegant, modern design Compatible with other manufacturer’s Z-Wave systems Z-Wave Certified product Compliant with CE requirement

Altronix ACMCB220 series distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

AL1002ADAJ220 is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 300 mm. Weight of arm : 6.85 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 12 mm/sec. Travel : 400 mm. Weight of arm : 7.15 kg.

No. of operators: 1. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 433.92 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

No. of operators: 2. Fits both right and left hand installations, making it convenient to install and the best operator to have in stock at all times. Die cast aluminium housing to resist rust and corrosion. Complete installation instructions and all required hardware are provided. Each model features a manual key lock release that will only operate with a removable key for added assurance during power outages. Rugged steel screw and gearing provide years of reliable, quiet performance. Electronic controls available. 2 x 3 channel mini remote control. 390 MHz frequency. Travel speed of arm : 20 mm/sec. Travel : 340 mm. Weight of arm : 6.6 kg.

StellarPro is a powerful embedded system based on the Motorola Coldfire microprocessor. StellarPro is equipped with uClinux embedded operating system. It has one Fast Ethernet port, operating at 10/100 Mbps. StellarPro has 8 RS422/profibus ports, the maximum baud rate of these ports is 19.2 Kbps. StellarPro comes with an SDK, containing a manual on CD-ROM, a comprehensive set of development tools and example programs.

Parabit 300-40002 is a white motion request to exit sensor with 2 Form C relay outputs (N.O. & N.A.).

12 V DC, 60 mA, 65 x 20 x 25, High security module

Parabit 300-40001 is a white motion request to exit sensor with 2 Form C relay outputs (N.O. & N.A.).

Application 66, non handed, maximum door width 830mm, max. door weight 45kg, unit mounted on 'push' side of door

The Integriti Medium Enclosure (M) is a universal sturdy metal enclosure designed for general purpose installation of Integriti, Inception or Concept Controllers, UniBus Devices and LAN Modules. The flexible design allows for a range of equipment to be fitted in various custom configurations to meet many installation requirement. A range of powered or non-powered versions are available to suit Integriti, Inception and Concept Controllers and modules. The Medium Enclosure's low profile side elevation protrudes less than 90mm from the mounting surface.

Aritech 2505A-L is a wide gap armoured cable contact designed to be installed in commercial and industrial environments where a rugged sealed unit is required. It is ideal for metal doors, overhead doors, fences and gates. It features a high strength extruded aluminum housing and is completely encapsulated in polyurethane potting compound. The 2505A-L also features a closed loop.

Conventional shutter door contact For monitoring shutter, sliding, and garage doors EN50131-2-6 Grade 2 High level of mechanical strength Conventional perimeter protection

Conventional shutter door contact For monitoring shutter, sliding, and garage doors VdS class C/EN 50131-2-6 Grade 3 Tamper surveillance High level of mechanical strength Conventional perimeter protection

Easily Ethernet enable your access control and other security equipmentCompanies around the world utilise access control panels to regulate building entrances.  Many of these systems were implemented before Ethernet networks were commonplace.  As companies rely more and more on the Ethernet to manage real-time security data, the need to Ethernet-enable existing security devices increase. Dig One SP device server is ideal to connect access control panels or other security equipment to the TCP/IP network easily and cost effectively.  Within a small form factor, the Digi One SP offers a full range of TCP/IP protocols to manage the device and integrate with your application as well as 10/100 Base-T Ethernet support and baud rates up to 230kbps. Modem emulation allows you to instantly replace an existing dial up connection with one connected across the corporate network or internet.  Digi One SP can draw power directly from access control panels, eliminating the need for external power supply-a potential point of failure.  Its small form factor enables the Digi One SP to fit inside control panel enclosures. Easy configuration using installation CD Web-based configuration Patented Digi RealPort® technology for COM or TTY port control management Operates at 9-30vDC TCP/UDP Socket Services for broad device connectivity and application use Switch selectable EIA-232/422/485 for simple interfacing to any type of serial Full hardware flow control When the time comes to manufacture the next generation access control panels, adding on-board Ethernet functionality will be easy and your time to market reduced with our wired and wireless Digi Connect METM embedded device server modules.

PCSC PCSC Exit Devices is the illuminated “Press to Exit” button. This heavy duty button is available in two sizes and features a stainless steel backing plate, large red lighted button and “Press to Exit” lettering. It is easy to mount and installation these exit release buttons are available in mullion mount and single gang box configurations. It work with all access control systems and can be configured for initially open or initially closed operations.