Access Control Accessories  (1,498)

Altronix ACM4 converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.

1 pair twisted, overall screened, 22AWG, 100m

Wired for 8 reader iStar Ultra SE, Network Connected, 8 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Wired for 8 reader iStar Ultra SE, 8 Lock Outputs, 8 Aux Outputs Provides uniform installations across an enterprise One enclosure, one AC drop, network-ready Capable of integrating with C-CURE 9000 Enables operational efficiencies and global standards UL & CE certified Customised design and high reliability operation

Finish - Stainless Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Altronix DTMR1 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher. A new feature has been added which provides a momentary relay activation at the end of a desired timing cycle. This feature eliminates the need for having to use two (2) timers to achieve this function. Another new feature will cancel (interrupt) timing cycle and reset timer if desired.

Finish - Stainless Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

PIN and weather protection Quick and easy fit Protection from rain exposure Lock life extension New and existing lock installations Suitable for external applications

for 12011, 14018

5 conductor, overall screened, 24AWG, 100m

3 pair twisted pair, individually screened cable, 24AWG, 100m

Altronix DL3 is a 1 second to 1 minute door control timer that is used for basic door operation. This timer, when activated by a momentary or maintained trigger, has an audible indicator.

Finish - Brushed Steel, Polished Brass Handed - Non Handed Lock Material - Zinc Alloy Suitable For - Internal, External

Finish - Stainless Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Finish - Stainless Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

3 pair twisted, overall screened, 22AWG, 100m

The Digi Connect ME family of secure embedded modules enables original equipment manufacturers to keep pace with ever-evolving networking technology by delivering complete and versatile embedded network connectivity solutions. The Digi Connect Wi-ME embedded module is pin- and software-compatible with the Digi Connect ME, and makes fully transparent 802.11b network integration possible without the traditional complexities of hardware and software integration. With the NetSilicon 32-bit NET+ARM technology, the modules also provide a seamless migration path to a fully integrated system-on-chip solution.

Altronix DPT724A extremely versatile 24 Hour 365 Day Event Timer is designed to support a wide range of applications: Home and Building Automation, Security, Access Control, Lighting Control, etc. The PT724A is equipped with an independently controlled form "C" relay contact that provides many latching and/or momentary operations during a program schedule of your choice. Events may be set for single or multiple operations on a daily and/or weekly schedule.

Finish - Stainless Steel, Polished Brass Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Finish - Brushed Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Finish - Stainless Steel, Polished Brass Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Finish - Brushed Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

4 pair twisted, overall screened, 22AWG, 100m

6 pair twisted, overall screened, 22AWG, 100m

2 pair twisted, overall screened, 22AWG, 100m

Computer Lock Kits provide a simple yet highly effective physical and visible deterrent to computer / equipment theft. For notebooks also.

Finish - Stainless Steel Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

Finish - Brushed Steel, Polished Brass Handed - Non Handed Lock Material - Zinc Alloy Orientation - Left handed, Right handed Suitable For - Internal, External

for 12011, 14018

Power limited supply/charger that will convert a 115 VAC 60 HZ input, into a non-power limited 12 VDC or 24 VDC.

Exit button typically placed inside door, will allow you to exit the door just as easily as you entered. All Anviz device which has access control function can connect with the exit button.

2921-0272 is a rectifier module. It has approx 10 % lower than input voltage.

Request-to-exit button with key icon Surface mount A request-to-exit button unlocks a door for a person without credentials. It typically permits egress even if ingress requires credentials

Gallagher Dual Cabinet is a secure steel enclosure accommodating two footprints, doubling the housing capacity for any combination of Gallagher PCBs. When the PCB is installed, optical tamper protection is provided for both the front and rear of the Cabinet. The Cabinet is also available with an optional 8 Amp power supply which has visible indicators for ‘low mains’ and ‘low battery’ power monitoring. A separate mounting plate and tamper board is available to enable Gallagher GBUS I/O Devices.

2921-0251 is a break glass unit. It has screw terminals for cables.

The Interlogix 1078 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. On available models a terminal connection (T) makes installation easier. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength.

The ITI 2202A-L surface mount magnetic contact features miniature low-profile design, stainless steel armored cable for added security, reliability, wide working gap for overhead doors and aluminum bar stock resists corrosion in harsh environments.

2921-0260 is a plastic switch. It has white plastic momentary switch with white plastic housing.

Aritech 2727A-L is a high security contact with armoured cable for overhead door. It features triple biased SPDT switch which is highly resistant to defeat by external magnets.

2921-0250 is a break glass units. It has screw terminals for cables.