Access Control Cards, Tags & Fobs  (541)

ABS plastic clam shell card. Flat/thin proximity cards suitable for direct printing applications. 1 year guarantee against electronic failure.

Combined keypad/proximity reader. Comes with controller and PSU.

Keyscan's Indala offers choices for dependable 125 kHz proximity access control readers. Keyscan Indala readers offer the additional benefit of enhanced security between the reader and card.

Aluminium construction. Comes with controller and PSU.

ICLASS Adhesive Tag with 2 Kbyte data storage 2 application areas, one of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

Used in conjunction with Readers and controllers. Proximity technology and photo identification on a single access control card. The ISOProx card is the same size and thickness as a standard credit card.Made of PVC,the ISOProx card is thin, durable and flexible. Read range varies between types of card, from 5 - 40cm.

Card, Proximity, PVC, 125 KHz, 8, -30 ~ +65, 10 ~ 90

Used in conjunction with Readers and controllers. Read range varies between types of cards from 5 - 40cm. The cards and keyfob offer a passive, no-battery design allowing an infinite number of reads. By combining two technologies on one card, the DuoProx card provides the benefits of proximity for access control applications, and meets the requirements for industry standard magnetic stripe applications.

Open Architecture Communication Protocol. Expandable up to 24000 Cardholders. Stores up to 4000 transactions. Supports RS-232, Optically Isolated RS-485 and Dial Up Communication. 64 Elevator Floors. MicroELV controllers can be installed with existing LiNC-NET system. Can also intermix with Ultimate Series, IQ Series and SIM Series controllers.

PCSC REC 20 is ideal for retrofitting or expanding existing card access systems, enabling long-range wireless Wiegand access control for boom gates, garages and general access. The REC-20 can be used in combination with Wiegand cards, offering the same access control to individuals whom require a long range solution in addition to building card access.The REC-20 secure RF Wiegand receiver extracts Wiegand data from within the RF Rolling Code Carrier Frequency.The platform provides full access monitoring and administration functionsfor card and keyfob holders.

Used in conjunction with Readers and controllers. Incorporates radio frequency identification electronics into a thin, durable polycarbonate package approximately the size of a standard credit card. Cards are easily customized with multicoloured graphics. With the application of a self-adhesive photo pouch or PVC overlay, the ProxCard II card is compatible with most photo ID systems. Read range varies between types of cards from 10 - 60cm. The cards and keyfob offer a passive, no-battery design allowing an infinite number of reads.

Used in conjunction with Readers and controllers. The ProxPass is an active tag specifically designed for vehicle access control. Used together with the MaxiProx long range reader, the ProxPass provides about 2 m read range. Velcro backing attaches easily to the interior of the vehicle windshield.

Mifare DESFire EV1 ID card with 8 kByte data storage 2 application areas, one of which can be customised MIFARE cards have a wire antenna and a MIFARE Chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz MIFARE cards support multiple application areas that can be individually protected The unique badge number is printed on top of the card enabling contactless reading by readers The credit card sized card conforms to the ISO-standard size enabling surface printing with conventional ISO compatible card printers Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions The card is durable with IP68 and can be fully submerged, all the electronics are sealed inside

Single port controller. Requires 2MB RAM. 256 access levels / 127 time zones. Supports up to 32 alarm panels (512 inputs) and 32 relay outputs. 2 card access. Timed and zone anti-passback. Wide range of reader types supported. Direct interface to various LANs.

ICLASS ID card with 256 byte data storage 2 application areas, one of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Open Architecture Communication Protocol. Expandable up to 24000 Cardholders. Stores up to 4000 transactions. Supports RS-232, Optically Isolated RS-485 and Dial Up Communication. 32 Elevator Floors. MicroELV controllers can be installed with existing LiNC-NET system. Can also intermix with Ultimate Series, IQ Series and SIM Series controllers.

Open Architecture Communication Protocol. Expandable up to 24000 Cardholders. Stores up to 4000 transactions. Supports RS-232, Optically Isolated RS-485 and Dial Up Communication. 48 Elevator Floors. MicroELV controllers can be installed with existing LiNC-NET system. Can also intermix with Ultimate Series, IQ Series and SIM Series controllers.

ACT-31B is a factory block-coded transmitter with the following features: compatible with all Linear MegaCode™ receivers and controllers, suitable for everyday installations, ideal for single-family, multi-tenant, and commercial applications.

CEM CRD/229/004 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardised Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilising Advanced Encryption Standard (AES) -128-bit encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

Onboard ethernet communication TCP/IP. LAN/WAN connectivity. IDE controller. 12.000 event transaction buffer.

CEM CRD/218/008 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardised Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilising Triple DES (3DES) encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

Tag, Proximity, ABS, 125 KHz, 4, -30 ~ +65, 10 ~ 90

Onboard ethernet communication TCP/IP. LAN/WAN connectivity. IDE controller. 12.000 event transaction buffer.

ICLASS Adhesive Tag with 256 byte data storage 2 application areas, one of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

CEM CRD/229/008 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardised Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilising Advanced Encryption Standard (AES) -128-bit encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

Card, Proximity, PVC, ISO size Printable, 125 KHz, 5.5, -30 ~ +65, 10 ~ 90

ICLASS ID card with 2 Kbyte data storage 2 application areas, one of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

ICLASS ID card with 2 Kbyte data storage 16 application areas, 15 of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

As an alternative to the traditional mechanical key, the PAC smart card is an easy and reliable means of gaining access to places of work and other secured access points e.g. car park barriers and turnstiles. Its single card solution incorporates access control with applications such as cashless vending and ticketing systems offering a cost effective and enhanced alternative to the conventional proximity card. The PAC smart card is ‘credit card’ thin, ISO 14443A compliant and requires no batteries.

The new key card offers a maximum range of up to 50m. The new triple-function Net2Air keycard operates as a normal  hands free token on doors equipped with a hands free interface and, by operating the keycard buttons, as a long range access card.

Proximity ISO card – 32 bit read only.

Proximity teardrop tag – 32 bit read only.

ICLASS keyfob with 256 byte data storage Fastening Slot ICLASS chip

The RW132KF2 2-way remote control is a stylish 8 button keyfob which provides users with a convenient way to control the security system. The remote control is easy to use with large keys, and is typically used for arming and disarming as well as reviewing the current status of the system. The 2-way capability enables a reply status to be received on the keyfob on the status indication LED, eradicating all doubt of the action performed and the system's status.

ICLASS Adhesive Tag with 2 Kbyte data storage 16 application areas, 15 of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

Proximity ISO card - 256 bit read/write.

Customize your swipe cards with site specific logos and messages. Gallagher provides free black and white printing of images and/or text on both sides of ISO cards - a one offsetup cost applies.  

FingerTIP CMOS Chip and System. Interfaces: parallel and serial. Comes with Flexband package or SMD package.

Proximity teardrop tag - 256 bit read/write.

Proximity ISO card – 2048 bit read/write.