Mechanical / Digital Door Locks  (542)

Application To be used with SMARTair door escutcheons. Specification The Spindle Kit includes the spindle, one threaded ring and three screws. The length of the spindle is related to the door width (A) and centre distances (X,Y) of the mortise lock in the door. There is available one different spindle length for each door width range 38-44 /  44-50 / 50-56/ Etc.

Mechanical automatic locking system Non handed, left / right Exit side can be changed over Burglary-resistant due to dead bolt with 20 mm throw Exit function by inside handle or panic bar Suitable for fire doors Controllable outside handle Mechanical override with cylinder

For both interior- and exterior doors Can be used on fire- and exit doors The lock automatically deadlocks when the door is closed The lock can be opened by key outside or by handle from inside

The latch is controlled by lever handles or a cylinder and the deadbolt by the cylinder The deadbolt protrudes 20 mm The lock can be used with DIN escutcheons and long plates The lock handling can easily be changed by pushing the latch bolt inside the lock case and turning it Fire resistance: Yes

Turning the key or thumbturn clockwise will deadlock the lock The lock is opened by turning the key or the thumbturn counter clockwise The door can then be opened by the handles The lock case works with Scandinavian cylinders

The hookbolt can be locked either by using a key or thumbturn The lock case works with the 4662 striker plate Mortice standard: SFS 5210, SS 81 73 82

The lock can be opened and locked by turning the key one turn In locked position, the deadbolt protrudes 14 mm The latch can be retracted both by handles or by key Lock handing can easily be changed by pulling out the latchbolt and turning it 180° clockwise The lock case works with the 0045 and 0068 striker plates

Operated by a handle and the WC-thumbturn Works with the 4690, 4691, LP711, LP714, LP721, and LP731 striker plates Fire resistance: suitable for fire doors Mortice standard: The mortice must be asymmetric, if the lock case is equipped with an extra handle spring

Has 5 levers, which gives the lock 250 unique key combinations The lock handling can easily be switched by pulling out the latchbolt and rotating it 180° Works with the 0045 and 0068 striker plates Fire resistance Mortice standard: SFS 5210, SS 81 73 82

Mechnical lock case with double action latch bolt and automatic deadlocking Opening outside by key or by door pull Opening inside by thumbturn or pad Scandinavian model

The lock can be locked by a key or by a WC-thumbturn The lock handling can easily be switched by pulling out the latchbolt and rotating it 180° The lock can be equipped with either a handle or a handle and a WC-thumbturn/key The lock case works with the 0045 and 0068 striker plates For interior doors

Lock case that can be locked using a cylinder key or a thumbturn In locked position, the deadbolt protrudes 14 mm Lock handing can easily be changed by pulling out the latchbolt and turning it 180° clockwise The lock case works with the 0045 and 0068 striker plates

Can be deadlocked with a key or with the WC-thumbturn The lock handling can easily be switched by pulling out the latchbolt and rotating it 180° The lock can be equipped with either a handle or a handle and a WC-thumbturn/cylinder

Mortice lock for public bathrooms The lock is operated by a handle and the WC-thumbturn The lock case works with the 4690, 4691, LP711, LP714, LP721, and LP731 striker plates Fire resistance

Mortice lock case The lock handling can be changed by simply turning the lock upside down The lock can be fitted with either a lever handle or a lever handle and a bathroom thumbturn The lock case works with the 0045, 0068 and 0068B striker plates

The roller latch protrusion can be adjusted by means of a screw in the front plate The door must have a door pull For reasons of safety, a special striker plate is used in conjunction with the roller latch The lock case works with the 0046 and 0078 striker plates

Recommended for public buildings The lock case works with the 4690, 4691, LP711, LP714, LP721, and LP731 striker plates Fire resistance: suitable for fire doors Mortice standard: SFS 5209

For both interior- and exterior doors Can be used on fire- and exit doors The lock automatically deadlocks when the door is closed The lock can be opened by key outside or by handle from inside

Recommended for public places The lock case works with the 4690, 4691, LP711, LP714, LP721, and LP731 striker plates Fire resistance

Deadlocking is controlled by a snib in the front plate When the snib is in its up position, the lock deadlocks and can only be opened by a key or by the thumbturn When the snib is in its down position, the lock can also be opened by the handles The lock case works with the 0045 and 0068 striker plates Mortice standard: SFS 5210, SS 81 73 82  

For both interior- and exterior doors Can be used on fire- and exit doors The lock automatically deadlocks when the door is closed The lock can be opened by key or by the interior handle

Application: Locks for exit doors offering a high degree of security, but with unrestricted exit in an emergency. Ideally suited for hotels, factories, hospitals, schools, offices etc. Also suitable for use with electric strikes. Can be included as part of a total security system, including mechanical and electrical devices. Striking plate is included. Cylinder and accessories bolt through lockcase for added strength. Key can only be removed in locked (or locked-back) position. Bolt reversible without opening lockcase. Specification Bolt deadlocks automatically when door is closed. Strong spring for use with lever handles. Available with either 50mm or 70mm backset.

Supplied as standard with striking plate. Both square and round faceplates are available. Latchbolt operated by lever handles. Latchbolt reversible without opening lockcase. Usable with DIN Severe Duty rated handles. Available with 60mm backset.

rim, with hold back Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

Bathroom Locks are suitable for bathroom and toilet doors. May be fitted with standard DIN dimensioned door furniture. 8mm handle and turn followers. Supplied as standard with striking plate. Both square and round faceplates are available. Deadbolt operated by internal thumbturn. Latchbolt reversible without opening lockcase. Available with 60mm backset.

rim, with hold back Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

rim, with hold back Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

Escape nightlatches are suitable for applications where single action escape is needed. Ideal for perimeter doors, storerooms, offices, etc. Available with single cylinder only. Uses Euro profile cylinders. Supplied as standard with striking plate. Both square and round faceplates are available. Key can be removed in locked position only. Bolt locks when door is closed no automatic deadlocking. Bolt reversible without opening lockcase. Available with 60mm backset.

Mechanical automatic dead locking system Changeable handling, installer can change setting during installation Exit function from inside by a handle Suitable for fire- and exit doors Override function for unlocking with the key from outside

Mechanical automatic dead locking system Changeable handing, installer can change setting during installation Exit function from inside by handle or panic bar Suitable for fire-rated doors Override function for unlocking with key from outside 8 / 9 mm spindle

Digi Codemaster.

Digi Codemaster with hold back.

c/w cylinder & thumb turn for timber doors.

rim, with hold back, Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

Application Locks for shops and entrance doors to private houses, industrial premises, offices or for any situation where a key operated deadlock is required plus a latch and lever handles. Available with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Supplied as standard with striking plate. Cylinder and accessories bolt through lockcase for added strength. Key can be removed in locked or unlocked position. Specification Hardened steel deadbolt thrown 21mm by 90° turn of key or thumbturn. Latchbolt reversible without opening lockcase. Available with either 50mm or 70mm backset.

non handed, latch holdback facility, free exit at all times, optional internal egress handle, protected clutch mechanism, for 44-54mm thick doors, narrow style with internal handle

Latch holdback facility, free exit at all times, optional internal egress handle, protected clutch mechanism, for 44-54mm thick doors, narrow style.

non handed, latch holdback facility, free exit at all times, optional internal egress handle, protected clutch mechanism, for 44-54mm thick doors, narrow style

non handed, latch holdback facility, free exit at all times, optional internal egress handle, protected clutch mechanism, for 44-54mm thick doors, narrow style

Mechanical automatic dead locking system Changeable handing, installer can setting during installation Exit function from inside by handle or panic bar Suitable for fire-rated doors Override function for unlocking with key from outside 8 / 9 mm spindle