Electronic Door Locks & Locking Devices  (1,502)

The Schlage® LE mobile enabled wireless mortise lock is designed to affordably extend electronic access control deeper into the building beyond traditional perimeter and high security openings. It can function in offline or No-Tour mode or as a networked lock with either periodic check-ins or real-time management. The open architecture design allows the LE to be managed by Allegion software or to be integrated into popular physical access control systems through our PACS Alliance program. This enables customers to choose the system that best fits their requirements and gives them the ability to move to a fully networked solution at any time. The LE is compatible with a wide range of mobile, smart and proximity credential technologies. Featuring two sleek trim options with a broad range of decorative lever and finish choices. The LE can be ordered with LED indicator, interior push button, or deadbolt to enable storeroom, office, privacy, or apartment functions. LE electronic wireless locks fit into existing network architecture and can work in the same EAC system as other wireless locks including Schlage Control™, AD-400 and NDE.

Easy on the eyes and easy on the budget. ANSI/BHMA Grade 1 hardware installs easily with no wires to run to the door. Communications over an existing IEEE 802.11 b/g/n WiFi network using open standard equipment makes integration into your access control system easy. The Passport P2 provides the ultimate in flexible security with a choice of magstripe and/or HID® 125 kHz prox or 13.56 MHz iCLASS® credentials and an optional keypad. Flexible, fast and secure with the lowest cost to install? Sounds like the other guys need to go back to school.

The roller bolt mechanism and angled strike plate enable the lock to resist up to 1 tonne of side load and yet still release under side pressure, making the lock genuine fail-safe, exceeding the requirements of EN13637. The lock is more sympathetic than a standard shearlock to doors that do not align properly and will pull a door in with a misalignment of up to 10mm.

Brass

Versatile and functional The ML-1100 mortised electromagnetic locks are ideal for many different applications. These mortise locks can be utilised with the Dortronics DPA door pulls for an attractive architectural appearance, while providing unsurpassed security functionality. Using the DPA series pull with a ML series mortise lock allows the force of the magnet to be directly opposite the direction of pull; therefore no mechanical advantage is gained when force is applied to the pull handle. There is no chance of racking the door. Steel or aluminum framed doors are susceptible to permanent damage when the lock is header mounted and the door handle is pulled repeatedly (while the door is locked). Rugged construction These locks and door pulls were first utilised in New York City’s Public Housing projects. The high level of use combined with the need to conform Architecturally and Functionally led to a truly tough yet appealing design. All fasteners are Stainless Steel and Tamper-proof. The design allows the ML Series lock fasteners to be totally concealed when the door is closed and locked. Applications In areas where aesthetics are a concern, the DPA series pull handle with the ML-1100 series lock allows concealment of the locking hardware. This pull handle is an attractive option for lobby and vestibule entrances. These pulls may be custom engraved and supplied in plated or anodised finishes. Safe operation All Dortronics electromagnetic locking devices are fail-safe, releasing instantly upon command or loss of power. With no moving parts to wear, stick or bind, and no mechanical linkages to bend or break, locking and unlocking is accomplished with ease and efficiency. Universal control ML series locks can be controlled individually or simultaneously from one or many locations. The status of the lock may be monitored by any card access system via the optional MBS (magnetic bond sensor) which signals that the lock is properly energised and is holding. The well confined magnetic field allows these locks to be used in computer rooms and other electronically sensitive areas. The ML series mortised electromagnetic locks are mounted by cutting a hole into the door frame per the template provided.  All wiring connections are made to the flying leads from the magnet. Two lock mounting blocks are then attached to the frame utilising one of the three tapped holes. The ML series magnet is then attached to the mounting blocks via the remaining tapped holes. DPA door pull mounting: Utilising the template provided, drill thru the door edge in 4 places. Mount the pull handle with the tamper-proof hardware. A specially designed shoulder screw is provided to insure proper floating action of the door mounted armature which is factory installed.

A high security lock with a hook bolt for exterior swing doors as an auxiliary lock or as a main lock integrated with sliding door operators Mainly kept open at day time and deadlocked at night time Can be integrated with BMS and burglary system Door and locking status can be monitored remotely from control room Typical applications are e.g. commercial buildings, hospitals, schools, universities etc, especially there, where automated sliding doors are being used Non handed, left/right Burglary resistant due to hook bolt and high security strike plate Strike plate provided with magnet contact monitor door status and control hook bolt function Mechanical override with key cylinder Option for thumb turn usage for temporary and reserve escape routes Suitable for fire-rated doors Monitoring functions : Door status, Hook bolt in, Hook bolt dead locked, Manual usage, key cylinder usage

Motor lock for exterior wooden and metal swing doors Can be installed with door automatics Latch bolt and handle can be controlled with motor Can be integrated with BMS and burglary system Door and locking status can be monitored remotely from control room Handle is engaged in the event of a power failure Suitable for fire-rated doors Typical applications are e.g. commercial buildings, hospitals, schools, universities etc, especially there, where automated swing doors are being used Settable handing, left/right Mechanical override with key cylinder Monitoring functions : Door status, Bolt in, Bolt dead locked, Handle usage, Key cylinder usage 

Motor lock for exterior wooden and metal swing doors Can be installed with door automatics Latch bolt and handle can be controlled with motor Can be integrated with BMS and burglary system Door and locking status can be monitored remotely from control room Handle works always mechanically (single handle) EN179 EXIT-approved Suitable for fire-rated doors Typical applications are e.g. commercial buildings, hospitals, schools, universities etc, especially there, where automated swing doors are being used Settable handing, left/right Mechanical override with key cylinder Settable latch out throw: 14 mm or 20 mm Monitoring functions : Door status, Bolt in, Bolt dead locked, Handle usage

Motor lock for exterior wooden and metal swing doors Can be installed with door automatics Latch bolt and handle can be controlled with motor Can be integrated with BMS and burglary system Door and locking status can be monitored remotely from control room Handle works always mechanically (single handle) EN179 EXIT-approved Suitable for fire-rated doors Typical applications are e.g. commercial buildings, hospitals, schools, universities etc, especially there, where automated swing doors are being used Settable handing, left/right Mechanical override with key cylinder Settable latch out throw: 14 mm or 20 mm Monitoring functions : Door status, Bolt in, Bolt dead locked, Handle usage, Key cylinder usage

Sargent Profile Series v.S1 electric lock with PoE technology brings the power of network to door hardware. An ANSI/BHMA Grade 1 lock utilising Power over Ethernet (PoE) technology, the v.S1 connects to the building’s Ethernet network, and can make decisions locally. Non-proprietary cable, PoE switches and midspans allow easy and cost-effective installations. With real-time door status monitoring and alarm notification, the v.S1 is available in exit device, mortise and cylindrical lock configurations.

The Profile Series v.S2 gives you more access control for your budget. An ANSI/BHMA Grade 1 lock, the v.S2 connects to the building’s existing WiFi network, and can make decisions at the door if the network fails. Because there are no wires to run, installation and labor is significantly reduced, and commission is expedited. With door status monitoring and alarm notification, the v.S2 is available in exit device, mortise and cylindrical lock configurations.

Mechanical automatic locking system Handed, left / right Fail locked Exit function by inside handle Mechanical override with cylinder from outside Monitoring functions - Deadlocking status of bolt Recommended to be used in interior and exterior doors of commercial premises, apartment buildings, etc. The lock is well suited for use with door automatics Can be controlled by a variety of impulse control devices, i.e. card reader, keypad, timer or push button

Motor lock for exterior wooden and metal swing doors Can be installed with door automatics Latch bolt and handle can be controlled with motor Can be integrated with BMS and burglary system Door and locking status can be monitored remotely from control room Handle is disengaged in the event of a power failure Suitable for fire-rated doors Typical applications are e.g. commercial buildings, hospitals, schools, universities etc, especially there, where automated swing doors are being used Settable handing, left/right Mechanical override with key cylinder Monitoring functions : Door status, Bolt in, Bolt dead locked, Handle usage, Key cylinder usage 

Superior reliability, strength, and safety with fast and easy installation No residual magnetism Fail-safe operation ensures that fire exit paths are unlocked during power outages No moving parts to wear out or break Lock status relay to indicate if lock is secured or not secured Built in time delay eliminates the need for costly add-on exit delay timers

Sargent Passport 1000 P1 electric lock with PoE technology is an online ANSI/BHMA Grade 1 lock. The Passport 1000 P1 connects to the building’s Ethernet network and can make decisions locally. Open standard cable and PoE equipment allows easy and cost-effective installations. Real-time door status monitoring and lockdown capable, the P1 is available in exit device, mortise and cylindrical lock configurations.

Aluminium

The CO-100 is a standalone, easy-to-manage, low maintenance lock that uses PIN codes as credentials. User rights are stored on the lock with unique PINs assigned to each user. This minimizes the number of mechanical keys issued, protecting the integrity of a facility’s key system. Administrator level users program the CO-100 using its keypad at the door to add or delete user PINs or change preferences or functions at any time. The CO-100 is ideal for: Visitor pass through/common areas Vestibules or reception area doors controlled by remote release Pool gates, breezeways, and other outdoor applications Maintenance areas Supply/equipment rooms Workout/exclusive use spaces Private spaces such as restrooms, nursing, or fitting rooms - anywhere visual occupancy indication is desired Cylindrical, mortise, mortise deadbolt, and exit trim chassis options are available as well as a wide variety of finishes and levers to suite with existing hardware.

Aluminium

SARGENT® offers Passport 1000 – a Grade 1 quality offline lockset partnered with the powerful PERSONA Campus™ software. This lock and software combination seamlessly integrates into a OneCard solution system providing comprehensive, reliable access control for campus housing and facilities.

Door profiles - DIN, suitable for wooden, narrow or glass doors Verticals - All industries, Special antibacterial surface for healthcare applications Traffic Volume - Medium to high Exterior usage - Yes (IP55), Up to 85% humidity without condensation, Temperature outside (-20°C and +70°C), inside (0°C and 50°C) Hardware compatibility and installation - High retrofit (compatible with most mortise locks), Drilling, no cabling Power Supply - Battery (up to 70.000 Cyclesmax. 3 years standby) System Management - Stand-Alone

c/w 3 keys

Superior reliability, strength, and safety with fast and easy installation No residual magnetism Fail-safe operation ensures that fire exit paths are unlocked during power outages No moving parts to wear out or break Lock status relay to indicate if lock is secured or not secured Built in time delay eliminates the need for costly add-on exit delay timers

for Lock case

c/w 3 keys

rim, with hold back Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

Inward door open type

Rim Release, 12

The Schlage® NDE mobile enabled wireless cylindrical lock is designed to affordably extend electronic access control deeper into the building beyond traditional perimeter and high security openings. It can function in offline or No-Tour mode or as a networked lock with either periodic check-ins or real-time management. The open architecture design allows the NDE to be managed by Allegion software or to be integrated into popular physical access control systems through PACS Alliance program. This enables customers to choose the system that best fits their requirements and gives them the ability to move to a fully networked solution at any time. The NDE is compatible with a wide range of mobile, smart and proximity credential technologies and can operate in storeroom, office, privacy, or apartment functions using its interior push button with indication. NDE works within existing network architecture and can exist in the same EAC system as other wireless locks including Schlage Control™, AD-400 and LE.

Satin finish

for DM3000/6000 series.

rim, with hold back Protected clutch mechanism, free exit at all times, anti-thrust lock bolt, suitable for doors 28mm-45mm thick, stainless steel bolt

Mortice Release, 12

for Lock case

Style, intelligence and robustness come together in the new SMARTair® Knob Cylinder from ASSA ABLOY. Part of the SMARTair® access control system, this intelligent device with integrated RFID reader is now more resistant to attack. It comes in elegant, contemporary finishes and colours, upgrading aesthetics and functionality in equal measure. It quickly upgrades almost any existing regular door to an access-controlled door — without any drilling. The new Knob Cylinder fits seamlessly and flexibly into a SMARTair® system, providing advanced, user-friendly access management designed to make any workplace work better. If you need to monitor and control who goes where, and when, you need the new SMARTair® Knob Cylinder. The Knob Cylinder is battery-powered and works with every SMARTair® access management option, so you can choose between online (“real-time”), offline, update-on-card and standalone management — or combine more than one system at the same site with the same software interface. Upgrading to the new Knob Cylinder is simple: just replace an existing mechanical cylinder with the new device. No complex installation or drilling stands between you and safe, reliable, flexible SMARTair® access control. Glass, wooden or aluminium doors — Scandinavian, Euro and many other profiles — present no problem. A modern, mobile solution The Knob Cylinder works with all standard proximity technologies, including MIFARE®, DESFire and iCLASS®, and also offers another new way to open your doors — with the SMARTair® Openow™ mobile app. With Openow™, users no longer carry separate credentials; just their smartphone with secure virtual keys stored inside. There’s no longer any need to collect or validate an access card to open authorized doors locked with the new SMARTair® Knob Cylinder. With Openow™, if you have your phone, you are already carrying your keys. Modern and mobile-ready, the SMARTair® Knob Cylinder is built to make your building smarter. Its robust design, redefined aesthetics and easy installation are perfect for securing offices, business headquarters, conference and meeting rooms.

For 3000 series.

bevel edged. Surface mounting.

single, c/w 3 keys

single, c/w 3 keys

The AD-400 is a wireless electronic lock designed to be modular and provide more. More options to choose from, more built-in functionality, more credential options, and more compatibility with access control systems. Its patented modular design allows the lock to be customized to fit the current application and adapt to meet future technology needs without removing it from the door.  The open architecture design allows it to be integrated into over 40 leading physical access control systems through PACS Alliance program. This enables customers to choose the system that best fits their requirements. AD-400 electronic locks communicate securely using 900 MHz wireless technology which operates independent of the IT network and has a longer communication range.  Available as cylindrical, mortise, mortise deadbolt or exit trim, the AD Series features built-in access control sensors and is compatible with a wide range of credential technologies. The AD-400 can work in the same system as other Schlage wired and wireless access control devices to meet the requirements of any application. 

The Schlage Control® mobile enabled smart lock was designed specifically for multifamily residence doors. It allows properties to offer convenient security to residents and intelligent efficiency to property managers. And, through support for Bluetooth® mobile credentials, Schlage is opening the door to any number of future possibilities.   Schlage Control mobile enabled smart locks allow residents to gain access using a smart credential or their smartphone. And without traditional keys to deal with, properties will save time and money in managing resident access. The open architecture capabilities of Schlage Control offer properties the freedom to use the physical access control (PACS) or Proptech provider of their choice to manage security and extend the possibilities of their locks beyond access control. For a simpler solution, managing access rights couldn’t be easier than by using the ENGAGE™ cloud-based mobile or web apps from Allegion. Staff can manage access from virtually anywhere. And with the capability to view audits, get usage data, receive alerts and more, ENGAGE improves the intelligence and productivity of the staff and property. Available as a deadbolt or interconnected lock, properties can choose from two attractive styles and a broad selection of finishes and suited decorative lever designs.