Access Control Readers  (1,375)

A unique device, the 3D Terminal works by obtaining a high resolution, nail to nail image. The level of detail is impressive, making it the most accurate fingerprint in the world. The accuracy ensures maximum security, and due to the level of details obtained, even the most challenging fingerprint conditions are met: intrusions such as dirt, dust, oil, water, etc. pose no challenge. Shallow fingerprints and even deliberately erased ridges are still accurately read. An unmatchable level of security.

iClass SE readers are highly adaptable and secure high frequency access control solution. It provides multi-layered security beyond the card technology, providing added protection to identity data using SIOs.

Nedap AEOS Convexs MN80FG is a flush mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80FG is capable of handling several different card types simultaneously.

The AP4001X offers security for 4 or more doors. In combination with the AP4801 unit and controller, it can be used to provide security up to 32 doors. The AP4001X provides a perfect, cost-effective solution for situations in which several doors in an area or building have to be secured using a specific reader technology. Connect up to 4 antennas Separate badge reader and antenna for maximum security Monitored inputs Protected against short circuits and sabotage 8 freely programmable digital inputs 4 configurable relay outputs

Nedap AEOS Convexs M80C is a surface mount Mifare reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs M80C is capable of handling several different card types simultaneously.

Nedap AEOS Invexs MND190 is a MIFARE Nedap DESfire reader for indoor use and is resistant to extreme cold and heat. Unique multiple card reading technology makes the MND190 reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Convexs MN80FC is a flush mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80FC is capable of handling several different card types simultaneously.

Sensor type: E-Field. Resolution(dpi): 250. Sensing area (mm): 13 x 13. Image Size (pixel): 128 x 128.

Nedap AEOS Convexs M80FG is a flush mount Mifare reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs M80FG is capable of handling several different card types simultaneously.

Nedap AEOS Invexs MND170B is a MIFARE Nedap DESfire reader for indoor use. Unique multiple card reading technology makes the MND170B reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Convexs MN80C is a surface mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80C is capable of handling several different card types simultaneously.

Nedap AEOS Convexs MN80G is a surface mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80G is capable of handling several different card types simultaneously.

Nedap AEOS Invexs M190 is a MIFARE reader for indoor use and is resistant to extreme cold and heat. Unique multiple card reading technology makes the M190 reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Invexs MN170B is a MIFARE Nedap reader for indoor use. Unique multiple card reading technology makes the MN170B reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Suprema FaceStation F2 is a fusion multimodal terminal with unmatched face recognition performance. Experience the exceptional authentication accuracy and anti-spoofing performance achieved by Suprema’s unique Fusion technology. Unrivaled Face Recognition Performance Best-in-class Multimodal Device Contactless Solution for the New Normal Robust Device Security and Data Encryption

Nedap AEOS Invexs MN190 is a MIFARE Nedap reader for indoor use and is resistant to extreme cold and heat. Unique multiple card reading technology makes the MN190 reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

An outdoor compact RFID reader based on Suprema's state-of-the-art RFID technology and multi-hardware platform Supports dual-frequency (125kHz / 13.56MHz) RFID technology and can read the mobile cards using NFC and BLE Packed in a rugged IP65/IP67 rated dust & waterproof performance as well as IK08 rated vandal-proof structure, suitable for tough environment and outdoor installation

The DC080 antenna is an antenna unit for secure detection of Nedap cards. It transmits the unique (RF) badge information to the door controller. Suitable for indoor and outdoor use Secure badge reading principle Vandal-proof protectors available Perfectly fits in standard electrical mounting box (DC080FC)

The Mifare Nedap antenna is for combined use of Nedap and Mifare credentials, and enables smooth migration.

RealScan-G10 is a compact live-scanner for single and ten-print capture. Suprema's advanced optical technology allows high-speed image capturing and seamless image processing. IP54-rated dust and water resistant housing makes it suitable for indoor and mobile environments.

The DC080 antenna is an antenna unit for secure detection of Nedap cards. It transmits the unique (RF) badge information to the door controller. Suitable for indoor and outdoor use Secure badge reading principle Vandal-proof protectors available Perfectly fits in standard electrical mounting box (DC080FC)

Replaceable housing face plates. Insensitive to soiling. Largely vandalism-proof. Low current consumption. Mifare sector reading with/without password protection. Read/write function.

An outdoor compact RFID reader based on Suprema's state-of-the-art RFID technology and multi-hardware platform Supports dual-frequency (125kHz / 13.56MHz) RFID technology and can read the mobile cards using NFC and BLE Packed in a rugged IP65/IP67 rated dust & waterproof performance as well as IK08 rated vandal-proof structure, suitable for tough environment and outdoor installation

Designed to simplify the selection process by offering a cost-effective fixed configuration that combines Seos physical card credential compatibility along with Bluetooth Low Energy (BLE) and Near-Field-Communication (NFC) technologies to support HID Mobile Access® To support niche low security applications, an option is also available to read credentials with ISO14443 unique identification (UID) number To further simplify the ordering process, Wiegand output and pigtail connection are standardised

Suprema, Inc., a leading global provider of technology in biometrics and security, recently announced the launch of a new model of IP access control multi-smartcard reader and controller, ‘Xpass S2’. Compared to its predecessor Xpass Slim, Xpass S2 is remarkably enhanced in RF performance as it now supports reading of various more card technology standards including MiFare, DESFire, ISO14443A/B, ISO15693 and FeliCa, as well as NFC. It also reads and writes data on the card sectors. In addition, with IP65 ingress protection rating, Xpass S2 is equipped with built-in adaptive heater and works under a harsh environment at a wide operational temperate range of -35°C to 65°C. It also supports expanded capacity, up to 50,000 user badges and 100,000 event logs for enterprise level organisations as well as small and medium sized businesses. Xpass S2 comes not only with TCP/IP interface, but also more traditional interfaces such as RS485 and Wiegand to provide higher flexibility and multiple installation options for different environments. A built-in relay and a configurable Wiegand interface enable Xpass S2 to be used as a standalone controller with other 3rd party readers. The device is designed by focusing on satisfying both aesthetic and practical aspects, featuring multi-colour LED indicator and extra slim profile of 11.4 mm. Measuring 80 mm of height and 120 mm of width, it perfectly fits switchboxes for most US, EU and APAC countries to provide easier installation. “The Xpass S2 is the latest addition to our growing access control lineup and provides extra flexibility for our customers in designing their access control systems with or without biometric solutions,” said Young S. Moon, Vice President of Suprema Inc. “Along with our biometric access control system, the Xpass S2 is expected to set Suprema as a leader in IP access control, meeting various needs for flexibility, complexity and scalability”

CCID support - WINDOWS®, LINUX®, MAC® operating systems Fully configurable and programmable keyboard wedge functionality featuring an integrated management console. Flexible configuration of data structures, output modes Enhanced lifecycle management

Latest Suprema fingerprint algorithm Powerful 1.2 GHz CPU RF Option - 125kHz EM, HID Prox & 13.56Mhz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, iCLASS SE/SR/Seos Reads all card types including Mobile Card (NFC and BLE) High-precision OP6 optical sensor Ideal for harsh environment and outdoor installation Colour LCD with Keypad for time attendance functionality

Multispectral sensor HID LumidigmTM Access Control, Time and Attendance (T&A) Excellent liveness detection / spoof prevention Designed for harsh environments In- and outdoor use Flush or surface mount Superior identification performance Identification or verification Small- and large-sized user groups Personalisable touchscreen Variable configuration and customising Various RFID Options Stand-alone and network capability

Top results in NIST MINEX tests and FVC  FIPS 201 certified template extractor and matcher  NIST certified interoperabl format standards (ANSI-378/ISO19794-2)  Image compression standard (WSQ)  100,000 match within a second  Plug and play USB 2.0 high speed interface  Supports multiple device handling

13.56MHz card compatibility Wiegand  UL294/FCC/IC/CE/RCM/SRRC/KCC  NCC / IDA / RoHS / FIPS201/ MIC  Life time warranty Multi-format is available - Hanwha Techwin,iClASS SE/SEOS, DESFire EVl CSN, MIFARE CSN, Felica CSN

13.56MHz card compatibility  Wiegand, Clock and data  UL294/FCC/IC/CE/RCM/SRRC/KCC  NCC / IDA / RoHS / FIPS201/ MIC  Life time warranty  Multi-format is available - Hanwha Techwin,iClASS SE/SEOS, DESFire EVl CSN, MIFARE CSN, Felica CSN

In the past, biometrics solutions for access control were often deployed with reduced security thresholds because their imaging technology, which routinely yielded false fingerprint rejections, resulted in long authentication queues at the door. HID Global’s new fingerprint reader, iCLASS SE® RB25F, merges credential excellence with HID’s globally-patented multispectral imaging technology to address the need for reliable biometric authentication and fuel broad adoption of biometrics at the door. The high-performance iCLASS SE RB25F provides an unrivalled experience by dramatically increasing image capture performance and fingerprint matching in under a second, significantly reducing delays that were previously symptomatic of biometric solutions. The reader contains HID’s Lumidigm® multispectral technology. The multispectral image read by the sensor includes surface, subsurface (subdermal) and liveness details making it the most forgiving, yet toughest-to-spoof fingerprint reader on the market. RB25F supports both template-on-card and template-in-device architecture, whilst carrying an IP67 rating for both indoor and outdoor use (-20°C to 66°C), and an IK09 rating for vandal resistance. Certified in several major geographies worldwide, the new iCLASS SE RB25F can be used with all popular industry-standard high frequency credential technologies including HID Mobile Access® Mobile IDs, Seos®, iCLASS SE®, iCLASS®, MIFARE DESFire®, and MIFARE® Classic.

Suprema FaceStation F2 is a fusion multimodal terminal with unmatched face recognition performance. Experience the exceptional authentication accuracy and anti-spoofing performance achieved by Suprema’s unique Fusion technology. Unrivaled Face Recognition Performance Best-in-class Multimodal Device Contactless Solution for the New Normal Robust Device Security and Data Encryption

DR4205 SERIES brings an assortment of feature-packed DigiReader digital proximity readers into the affordability range of any organization. All DR4205 Series DigiReaders provide features like: hands-free proximity for convenient access; audible tones and programmable three-color LEDs for easy access status. DR4205 acts as the eye of complete access control and security management system solutions from the leading single-source manufacturer in the access control industry.

HID pivCLASS RK40 is a wall switch with keypad contactless reader suitable for use in security areas. It fulfills the FIPS-201 criteria for controlled access and is intended to support the use of a personal identification number (PIN) entered via a keypad and sent directly to a panel or door controller.

Mobile-ready contactless smartcard reader Models with read range for upon presentation (1.5 in.) or long range ( up to 15 ft) Supports Wiegand output interface Mounts to door and window frames (mullion) Credentials stored on smartphone (iPhone or Android) for communication with reader