Access Control Accessories  (1,332)

Spring adjustable size EN 3-4 door mount pull UKCA and CE marked for door mount pull, transom mount pull & push applications Designed for use on low voltage circuits 24V DC linked to a fire alarm Track mounted with an effective and reliable electromagnetic holding force Manual override allows the door to be pulled closed at any time On-board test switch stimulates fire alarm status Fully adjustable hold-open angle from 75 to 120 degrees Adjustable closing speed & latch action Built-in adjustable backcheck to prevent damage to the door and frame Suitable for fire door applications Electro-magnetic hold-open in the track with on-board test switch to stimulate alarm activation

Low projection template adjustable closing power size EN 3-4 door & transom mount, EN 3 parallel arm mount applications Certified, UKCA & CE marked for door mount pull, transom mount push and parallel arm mount applications Catch plate can be set to operate in hold-open or swing-free at the point of installation Adjustable closing speed & latch action Designed for use on low voltage circuits 24v DC linked to a fire alarm Supplied with armset and brackets for door mount, transom or parallel mounting Electromagnet is controlled by the building fire alarm/detector and activates the ‘catch plate’ to ensure the door closes automatically in the event of a fire or power failure Test switch simulates fire condition to check operation Supplied with flexible armoured power loop (330mm long as standard) to run power safely from the door frame to the closer

Fixed power size EN 4 Certified for door mount pull, transom mount push or parallel arm push side applications Catch plate can be set to operate in hold-open or swingfree at the point of installation Adjustable closing speed & latch action Fixing template for quick and easy installation Designed for use on 24v DC circuits linked to a fire alarm Electromagnet is controlled by the building fire alarm/detector and activates the ‘catch plate’ to ensure the door closes automatically in the event of a fire or power failure 

Fixed power size EN 5 Certified for door mount pull, transom mount push or parallel arm push side applications Catch plate can be set to operate in hold-open or swingfree at the point of installation Adjustable closing speed & latch action Fixing template for quick and easy installation Designed for use on 24v DC circuits linked to a fire alarm Electromagnet is controlled by the building fire alarm/detector and activates the ‘catch plate’ to ensure the door closes automatically in the event of a fire or power failure 

Handicap accessory - exit button - surface mount box for 100-00191

GT-7030 is a tamper proof screw.

Universal fit, Power size 3

3 or 10 twisted pair (100m). For use with all audio intercom systems.485-1 is for use with On-line access control for data communications. DIAX tools and vandal resistant screws are also available.

Provides users with their own on-site ID management system giving total flexibility for card production. Enables users to design the card with aid of database design and picture capture modules. Can be used with Windows 85, 98, SE, NT4 and 2000. Also can be used for signature capture and barcode printing. The IDPro 6.3 - Networker version is a multi-user station version offering all image capture and print options with full ODBC compliance for integration with existing software applications. Many optional extras are available to enhance the IDPro service: image capture devices, tripods, videoboards, computers & support.

Enables visitors and contractors to your site to be issued with clear, easy to read badges, displaying name, company and the person being visited. User definable entry fields; multiple user definable pass designs; meeting room booking module; password protection; full network support & remote pre-booking facility. Optional extras including pass wallets, lanyards, printers, barcode readers & signature capture tablets are all available.

For users of IDPro software who do not wish to print onto PVC these PET laser sheets allow the personalisation of cards through an A4 laser printer. Once printed the cards are then simply laminated using Laminex tab style pouches.

Pantone matched print (printed onto both sides). Using dye sublimation printing onto a white base stock, this process provides a high quality durable finish. Minimum quantity - 500 lanyards.

Coloured top PVC wallets. Available in red, blue, black, white, green and yellow.

Ideal as a replacement closer the Briton 200 series has been designed to cover the fixings of popular trimplate design closers on the market. Briton 240 is suitable for doors up to 1400 mm wide and 120 kg in weight. Briton 240 is windthrough adjustable strength closer with adjustable backcheck and adjustable delayed action as standard. Closer is fixed to the pull (hinge) side of the door. Optional applications of closer fixed to transom on push side of the door or closer fixed to parallel arm on push side of the door also available. Door closing speed can be adjusted to either increase or decrease.

A non-projecting track arm electromagnetic door holder/closer which is ideal for use on internal doors which require self closing, but specifically where such a requirement is deemed to be inconvenient to users. Wind through adjustable strength closer for door sizes from 750mm to 1100mm and from 20kg to 80kg in weight. Adjustable backcheck as standard to cushion the opening cycle and prevent damage to walls or furniture. Available with 2 cover options and a choice of 24 quality finishes. Value added saving features of the Accufit Installation System.

PSU module Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

Alpro EB-250/SMH-KIT is a stainless steel surface mounting kit.

Alpro EB-250KO/SHORT is a short strike plate with square hole.

Alpro DB25KO/LONG is a replacement long strike plate.

Alpro HP4560-LH is a cam plug - left hand.

Alpro ALP206J is a Cobalt dress plate with self-adhesive tape for instant application to glass doors and frames.

Alpro DB25KO/SMH-KIT is a stainless steel surface mounting kit that includes surface mount housing, surface mount strike box and long strike plate.

Alpro DB25KO/SMK-DP is a stainless steel dress plate for glass applications.

Spare cranked bracket with SSS finish

Spare cranked bracket with SSS finish

Spare standard straight bracket with SSS finish for Functional 97 Series of pull door handles.

Spare cranked bracket for Functional 97 Series of pull door handles.

Briton 2000.CP is a cover pack for 2003 overhead door closer.

Briton 2000.FP.ZP is a fixing pack for 2003 overhead door closer.

Briton 2000.AP is an arm pack for 2003 overhead door closer.

Briton 2003V.AP is an arm pack for 2003V overhead door closer.

Briton 2003V.BP is a backplate pack for 2003V overhead door closer.

Briton 2003V.FP.ZP is a fixing pack for 2003V overhead door closer.

Briton 2003V.CP is a cover pack for 2003V overhead door closer.

Briton 2003V.BRK66 is a bracket pack for 2003V overhead door closer.

Briton 2130.AP is an arm pack for 2130B & 2130BD overhead door closer.

Briton 2130.BP is a bracket pack for 2130B & 2130BD overhead door closer.

Briton 2130.FP.ZP is a fixing pack for 2130B & 2130BD overhead door closer.

Briton 2130.H.BRK.66 is a hold-open bracket for 2130B & 2130BD overhead door closer.

Briton 2130.DP01.C.SE is a drop plate for 2130B & 2130BD overhead door closer.